Question do all older rams sound like this ? Or what is that clicking on and off when he starts the truck

your the best thank you for the video !!!

Which direction do those bolts come off? Are they reverse threaded?

The part number that I've found in this thread..2 of them. Do not match my cable. The AUC in the beginning seems to be my hang up.

Can some please confirm if this worked on a 2000 Dakota? Thanks!!

I'm late to the party, but I just want to say thanks for sharing your knowledge. This solution brought my A/C back to life! It was a great feeling when the cool air came out of the proper vents. When it's 120 outside, it sure helps!

i you do this it will work 🗣️💯

Partially drive up the gate on the side u will have more access to 2 blades then for the last blade drive on that side a little higher on the gate u will be halfway on the gate on both ends

does this fix heat to come out of the front vent aswell? no matter what it seems mines just blowing threw the vent

My AgPro guy said my throttle cable was getting frayed and I should replace it. Only 58 hours on the JD EZ turn, and never felt any looseness or slack in the throttle lever. He said will cost $133, to replace the cable. I feel like its never been lubricated and maybe that contributed or maybe Im being had? It seemed to work fine in the yard with no issues before I took in for annual tune up. Appreciate any thoughts out there.

You my friend just saved me so much trouble. Days of researching, but I found your video. Thanks

The vacuum tubing on mine broke at the firewall. Must be a weak spot. The plastic was a bit deliriated too.

Man just broke my vacuum line at the firewall. You are a genius

been running scag mowers since 2003. now own 6.

Is the tiger cat two reverse threaded?

Thank you worked great ac is back blowing cold

Great video!! Thanks for the quick and easy fix!!

Freakin rednecks know all the riggings

So was the vent door not opening? Because my vent door won't open and close?

THANK YOU SO MUCH

A BIG THANK YOU!!! This worked for me too and I also think its the best way to repair it. God Bless!!!

Its 2023 and i just got a 2nd gen ram like this one and had the same problem. THIS FIX THE PROBLEM! HE IS A LIFE SAVER OMG LOL!. Im glad you posted this on youtube. Without this video I wouldnt be able to fix my problem.

Which vac line did you cut behind the HVAC Controller?

Bought a 52" TC 2 in April of 2017Just checked out your Video because I'll be changing my blades for the 1st time tomorrow. Only 86 total hours on it! 🙂 Thanks

Thank you very much just fixed mine

When turned on the ac blows hot air after the ac comes on for a few seconds

Thanks for the video had to change mine on z355e appreciate you brother and ur videos ..cheeres from aus.

Very cool. Im surprised in just seeing this video after searching this up many times. My 95 has 164k. I put new shocks and then realized most of the front end ball joints have to worn out. Steering g wheel was crooked with a good amount of play. Still drive decent. First we did the track bar and they aligned it but I went more and did the tie rods they weren’t clunking and the shop said they were ok but you could smoothly move them around pretty easily. Had them replaced. Need to check it out when I pick it up and I’m sure the tie rod assembly will not be moving so easil. Im surprised they were able to align it.

Thanks

Will this method just help to open the vents? My 99 dodge just blows through the defrost

Great video,just got done doing this to mine. I ran my line across underneath seal against firewall. Zip tied it to wire harness and ran through fire wall by steering column. Total time about 30 minutes!!

Hopefully you will see this. My 98 the air coming out of the dash will divert to the defrost when I go up a hill. Do you think this will fix it?

So I have the same issue , and I think it’s causing my truck to have a rough idle and loss of power. I hope this fixes the issue.

Whats your discour

Hi boss! Where can I buy that cable?

Thank you for this video! I just changed my throttle cable with your help. I Appreciate it

Just changed the same throttle cable on my 355e model, 2016. I took off the heat shield and green back plate for more room. Seat springs didn't need to be taken off. New cable works like a champ! Great helpful video. I believe that I just saved myself $200, thank you!

Thanks for the instruction video!

Thanks for the video. My vacuum line came off at the check valve. I could not figure out what was supposed to go to it. I guess the line fell back into the cab. My truck is really clean though. No cracks in entire original dash. Im going to try and go fishing.

Part # AUC10079 $64.06. I'm thinking I'll take the bumper off so if I don't have the cable right it will be easy to adjust. And if you have the Torx sockets, you probably don't need to remove all that plastic, just bend the plastic out some and get it from underneath. Thanks for the video.

I have the dodge 1509 1998 sport 5.9 and I only have ac or heat to the flor and and front class do you think I cab fixed the same way how you did

Good job Thank you 👍

Yes Truck like my Dad 2001 Dodge ram 1500 V8

Does this work for cruise control too?

Please refrain from posting a full video. No one likes them.

Impressive aim bro 🔥😳

Thanks helped me

This was clean not gonna lie

First short that popped up lol

I don’t remember that ramp being in the back. Is that new?