Did not work on my 05 A8L. Could not get to the green screen

Thanks for the great videos! Is mib working on MHIG system?

Do i need to copy all the files or just the 1,2 , last update and read me. Because there is an extra file (downgrade) and i dont know if it should go to a sd card as well thano you Ps. Fast please

Thank you for all your hard work. I'm trying to update maps on my 2017 Q7. Tried to download new maps from the website you recommended a couple of times and every time I unzip downloaded folder it gives me an error and I can't install new maps for North America ***P356_N60S5MIBH3_NAR_V03959803AR_0356_2024_02310034.zip***. Maybe someone had the same issue and has a solution for that or maybe you have another source to download this package to update NAR maps for Q7? I updated my FW to MHI2_US_AUG22_K2162 from S2149. For some reason the newest FW - K3347 is not installing - says that is not compatible. But following your website it should work... I successfully added the activation key for maps update - just need maps file.

You are thé best in group VAG

Can someone help me and give me the dimensions of the material needed to wrap the waterfall? Also, is a special type of wrap needed for the interior?

Hi everyone does someone know's the variat code for a arteon with leter's as well??...because on the obdeleven it show's me on long coding the byte and hex just 00 00 00 00 00 00 00...thank you

Hey, how do you get the EGR coolant hose spring back on?

On my previous comment I forgot to mention that I receive errors in 5F -- "Right & Left Bass Speaker -- Open Circuit". Any solution? Thanks again...

Thank you very much..... Very accurate and concise helped me upgrade to the latest MHS2_ER_AU_P2035 version on a Q2. One question came up watching your video. I have installed an Alpine KTA-450 external amplifier - and every time car switches on an annoying "clicking" noise comes from the speakers. Same happens when driving and "start-stop" comes up. Do I need to do any changes with OBD 11...??? Have not been able to get anywhere asking......Thank you so much in advance.....

Thanks

This will be the last golf I will buy now. Just can't believe all these common problems and I've had them all. Definitely not what they use to be.

How do I understand which amplifier I have in my Audi A4 B9 2018

Please help me: I have MHI2_ER_AUG22_S2116. I want to update my maps: Do i need to do it in this order?: 1) firmware update (which one to use? there are 6 of them? 2) install M.I.B along the "patches" and apply patching 3) copy & paste maps (~26 GB) to sd card and start with the update of maps? p.s. i don't have "key #023000EE" in red menu. Thanks!!!!

Thank you a lot

Hallo, Where i found the Patches? Thanks.

does this also work for right hand drive?

Nice❤

Doesn't work on MST2_EU_VW_ZR_PO475T when I selcect it to install it says N/A on everything.

I have a MHI2 (Golf 7) and my menu is not like that, does someone know how to change it?

Thanks

Perfect! Very straightforward using your instructions, and went from MHS2_ER_AU_P1242 to MHS2_ER_AU_P2035 on my 8V S3 FL (2018). Thanks so much.

Does this stop the DSG auto shifting up if doing a pull on a dyno? Had issues where the guy said it keeps up shifting in 5th gear to 6th before redline

Thank you!!!

Thanks 👍

Will this work on the mark 6?

Siema, chce zrobić upgrade radio w golf 7 :D mam teraz najprostsze radio to composition color... mógłbyś mi doradzić jak do tego podejść zeby zrobic fajny upgrade? i czy to coś " w schowku" jest konieczne?

Hi. Thank you for your video. I have a question, how I can reset the misalignment in VCDS? I got the following fault code on my VW Passat 2015 with side and park assist: Address 3C: Lane Change (J769) Labels:| 3Q0-907-566.clb Part No SW: 3Q0 907 566 B HW: 3Q0 907 566 Component: MRR1Rear H16 0230 1 Fault Found: 1311126 - Control Module for Lane-Change Assist C1114 F0 [009] - Automatic Calibration Not Possible Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 4 Fault Frequency: 1 Reset counter: 254 Mileage: 96342 km Date: 2024.09.24 Time: 09:29:12 Control Module temperature: 31 C Voltage terminal 30: Measuring value not available Vehicle speed: 0.00 km/h Terminal 15 status: Measuring value not available Voltage terminal 15: 13.00 V The data that I extract is: IDE00018 Voltage terminal 15: 13.00V IDE00019 Voltage terminal 30: 13.00V IDE00020 Terminal 15 status: On IDE05090 Measured receiving power lane change assist. 1: 1,86% IDE05091 Measured receiving power lane change assist. 2 : 2,85% IDE05092 Measured angle lane change assist. 1: -36,10 degree IDE05093 Measured angle lane change assist. 2: 39,50 degree IDE05094 Static angle offset lane change assist. 1: -3,90 degree IDE05095 Static angle offset lane change assist. 1: 0,45 degree IDE09387 Dynamic angle offset lane change assist.: -5,59 degree I assume that sensor 1 is at the wrong angle, I think the sensor moved after I hit a wall. My assumption is correct? What do you think? If I move the sensor in the correct position how I can reset this values? or are resetting automatically? Many thank in advance.

My Mercedes w220 have this option made 2001

Dzieki ! Potrzebowalem tego 😁

I've been having trouble getting this working properly on my 2019 R. It dips down in reverse, but will not return when moving forward or shutting off the car. I used the OBD11 app to do it, so I will check the long coding tomorrow.

Greetings friend, excellent video, do you know if there is a patch for SD to eliminate component protection for mst2 US vw pq p039t the radio 5K7035200F???

do you have a file for usa ? it wouldn't work for me

Android auto does not work smoothly and i return

256, 4FA, 306, 318, any ideas? No cold air

There is a similar experiment, but with the original camera. How to remove the mirror effect? 🤔

I have MIB2 with 0253 installed, part number 5Q0035874A. It often goes in bootloop for the first 20 minutes. Once it's fired up, it will remain stable. Does it make sense to update or is it more likely a hardware failure?

Hi! Can help me? Audi q5 fy, have camera on windscreen…Trying to do step by step, but there are problems. 1) I cant find channel “display end of speed limit”….I just dont have it! 2) dont have channel “valid adittional character “ 3) I cant make any changes in the car infotainment display (car->setup etc). It doesnt show. P.S. I made ALA from your video before. Thanks for that!

The audi smartphone interface is now greyed out, how can i unlock it ?

No dobra, ale co daje ta aktualizacja softu ?

hi, my b&o was accidently included the update firmware MHI2_US_AU57X_K3341 and now sound quality andd volume is very low, what do I need to do to get this issue fix? appreciate any help.

Thank you! My A1's Bluetooth sometimes doesn't fully connect as a music player and I used to stop the car and turn it off 😅

Why even when i put a new bulb it doesnt work?

Audi a8 d3 2007 quattro, green menu doesn't appear 😢 at all

does this work on VW Touran 1.6 fsi 2003 model?

Car Scanner app is better than this. You only need to enter "Confirmation of installation changes" in Multimedia category and press "confirm". That's it.

Work oil level ? Car_Function_Adaptions_Gen2 menu_display_oil_level Car_Function_List_CAN_Gen2 Oil_level

HELLO, I have sucessfully updatet my system from MST2_EU_SE_ZR_P0472T ->>>>>>>>>> P0480T. I also downloaded the Toolbox on Github, everything Ok, but the Green Menu would not like to apparear.. what is my mistake ?????

Hello sir how are you... Can you tell me how to change mileage of audi a4 2017 b9 please help

Thank youu !