Since 2021, I've dedicated my life to helping those suffering from what is known as 'EMF Sensitivity'. Although there is no such thing because Scientists and Doctors do not understand it, that is the term they coined. Because of that, I embarked on a 12+ years Journey to understand what really "EMF Sensitivity" is and why some people have it or experience it while some do not. After about 7-8+ years in, I found The Wonder Rays, and understanding of how it behaves, so I invented The Wonder Bracelets and after that, I invented The Wonder Tent. All these taught me something very important and it is all in the Video Section.
I love to repair things and DIY... Cars, Trucks, Lawn Mowers, Tractors, How To Stuff, Health Videos, and sometimes random jokes. If you are new to My Channel, welcome!
ALL MY VIDEOS PLAY LIST: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XzLVxWXsJ9g.html
The filler will end up absorbing water and make the rust so much worse. If you're going to do something like this then at least grind the rust away first and use fibreglass.
If you see this in one of your videos you mentioned you can’t find the green scrubby part of your sponge. I found some at the dollar tree, they have a medium and heavy duty. I’m going to make sum of your scrubby pads. Thanks for the video
Gonna give this a try tomorrow…. Thanks a ton…. My mower won’t stay running unless I hold the key on ….. did fuel filter, solenoid and still nothing… ill update yall when done
Unfortunately, my dog passed away in early December 2023. I think Leukemia hit him too, but I didn't know. Because I didn't know how he felt or ask him anything, I couldn't help him. In the end, it was tough because he curled and walked sideways and lost lots of liquids and I didn't know what he needed. I could have prolonged him, but seeing him suffering, I had to let him go. It was hard, but I had to do it.
He and I got sick at the same time but I survived for now. I'm doing good with my health, fighting with all I have to prove to the world what this Low Non-Ionizing Radiation does!
@@jeepdog - THANK YOU. I knew that someday my dog would die and I'm AOK with that. I think the Cell Towers and Digital Air Waves speed it up faster and robbed him from me. It's unfair that we all suffer because some people do not know what Digital Greediness can do to others. Every milli-second someone is hurting another and themselves too, but do they care?
What about the older units that have the Freon 22 ? Is that going to mix with the R 134 a and not cause any problems. Some say that they use a different oil for compressor lubrication.
Yes it affects my kidneys badly , I stop being able to eliminate the water that builds up around my main organs , perhaps in a desperate bid of the body trying to protect itself. I can swell several inches around my belly button.
You need to go to a BIG NATIONAL PARK or SOMEWHERE that has no Cell Towers or WiFi or Bluetooth and has LOTS OF TREES. Cell Towers MUST BE at least 10,000+ feet away from you. Spend as much time there as possible, sleep there if you can. Add 500-1000mg TAURINE to your water and drink it. Taurine will relax the bladder and release it for you. Drink Coffee or Dandelion Tea with Taurine. This will help the body to expel the water in your body. NOTE: Go to a doctor if you can't pee ASAP.
Great easy, not boring video, why does it not get likes, this guy's voice is funi, sounds like a cartoon character, big shout out from KaapStaad. Salutas
hey @jordan this is a really great video - im tryting to fix my portable AC which is using R32 gas - do you think it would be possible to use 134 to re fill it ?
Thanks a bunch , I was looking for that part since the plug part broke off , they wanted like $153 for that part , I’m trying this instead , appreciate the advise !!
Well , I just cut the tip of the solenoid , put it back in , stared to leak fuel , went to hardware store , get me a bolt , cut it short , plug it there , and it work perfectly, just finish the yard , thanks again !!
@@JodBronson it’s because of CD. I’m surprised they didn’t delete my initial message. Do your research on alternative platforms. You won’t find anything on it on RU-vid or Google that isn’t propaganda.
Although I will watch them all, your consolidation of the highlights is very helpful! I may need to do this with my portable R-410a system. But I believe my issue is a bad capacitor. As I await the delivery of the new part, I'm doing further research just in case. Btw, your opening is absolutely hilarious and real! Only a self-righteous elitist would interpret it within the context of race. You gained a new sub!
Get the Meter Gauge and the Valve Port like in the video, you can test how healthy your AC is without refilling it or know when to refill it. Very easy..... Once you hook it up, you can tell how much "Gas" is in there by the Compression on the Gauge Meter. As for.... "your opening is absolutely hilarious and real!" <-------- You are 100% !!! It wasn't meant as in "race" but it's a term or word we use in the City and the same as Homeboy, Bro, etc....
Hello Jordan, I installed the valve and checked the pressure. It was fine, no refrigerant needed, but still doesn't blow cold. Compressor kicks on, and the capacitor is good. Not sure where to look next. 🤷♂ Any ideas? TY.
This does work pretty well. I'd like to ask though what ratio of water to Drano max are you using? Like half and half? I did this twice on my tub today but I was worried to go too concentrated because I didn't want the Drano to damage the surface of my porcelain tub. I tried to match about what it looked like you were using and I waited 10 minutes before rinsing and scrubbing it off. I went a little stronger the second time which to me looked more concentrated than you used but it's hard to tell from the video which is why I ask. I was able to use a magic eraser afterwards to get strains off that I haven't been able to remove since we moved into our place 5 years ago which was great! Before that I couldn't get the stains off even with the magic eraser and a lot of elbow grease. I did have to put a bit of sweat and work into it though so it wasn't simply rinse off and gone though these were really embedded stains in the textured slip surface..
Quick question. I have been bridging my starter solenoid to turn the engine over and it will only start with starting fluid. When I turn my key I get no click on the fuel solenoid. Would the bypass fix the no start issue or do I need to address the ignition issue right now.
Only starts with starting fluid could be the solenoid not letting gas in/through. Open the Carb and bowl up and clean it really well. Put it back and see if it starts normally. During that time, listen to the solenoid to see if gas is letting through. After cleaning and everything put back and you see the Gas in the Carb Bowl... That means the Solenoid is AOK. If not then the Solenoid needs by-pass.
@@OhhEssence - If it's new, then check the connector that goes to the Solenoid is correct and gets enough voltage and make sure you hear a click. You can test that alone without starting. Just insert the key to ON and see if the Solenoid makes a clicking noise. Other than that, we know it's a GAS problem !!!
JUST USE MIX OF DAWN SOAP ,WATER,2 GALLON PUMP SPRAYER, AND VINEGAR. PUT HOT WATER IN PUMP SPRAYER ABOUT 1.5 GALLONS OF WATER, 4 SHORT SHOTS OF DAWN OR MORE IF WANT,AND 2-3 CUPS OF VINEGAR PUT CAP ON SPRAYER AND SHAKE IT, THEN SPRAY ON ANY THING GREASED, AND SCRUB WITH BRUSHES,SPOUNGES,SCOUR PADS ,RESPRAY AGAIN AND SIT FOR 15 MINTUES AND HIGH PRESSURE WASHER