Thx poster 👍🏽 Worked for me today on UK Giulia Veloce 2017. Took 2 attempts. Oil change warning no longer flashes up. The maintenance expires message still appears though.
thanks for posting this, didn't work for me on 2019 guilia ti, but this did : For the instrument cluster, turn on the car turn off the car open and close driver door without touching the brake pedal turn on the car wait for 2 to 4 seconds depress the gas pedal completely till you feel the click and release 3 times with one-second gap between each Turn off car Start the engine as usual
I have a p2714 code my mechanic told me to change the whole transmission i was wondering what solenoid i would need to change if i were to fix it myself
P2714 means that there is problem with the oil pressure in the transmission system, it doesn't say with part is defective, you can check the oil pump or control pressure solenoid or oil level sometime changing the transmission oil can fix the problem. This code can lead to the transmission replacement because is too complicated to go straight to the defective part
I gotta say you are quite resourceful, but there is no need for this trick. There is an easily accessible service menu on the screen by the tach which will automatically put the rear parking brake in service position.
Indeed you dont need any tools to do it and Mercedes Benz would not design it that way. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YASYJ4P_9mg.htmlsi=UPNkVnlo1tyqVEz5
I get lost at the end after pressing the brake pedal 6 times, it says press the gas pedal and start the car. But it never says how long I should hold down the gas pedal before starting. When you start by holding down the gas pedal, the car accelerates super fast, you don't really hear it like that in the video, it feels like it starts normally. Obviously the car does not start with just the gas pedal pressed, you need to press the brake pedal. So I don't know if I should start the car with both pedals pressed or should I release the gas pedal after a second and then start the car.
I'm having some trouble getting the old flasher out. Is there some kind of lock on it or something? It appears like it would just pull out but it's not budging.
Just as with all the other videos describing this problem you do NOT show the oil reset light before showing your method to resolve the problem. Perhaps this works but most likely it is just baloney.