I have to fetch the healthy wiring from my old worn out seat to put into a replacement seat from a junkyard that the guy carelessly snipped during removal. When I flipped the new seat over, the wire harness seems to disappear way up into the bottom of the cushion, so it looks like im gonna have to take the whole seat apart. Other than the bit and ratchet, are there any other tools you think ill need, and do you have any steps on how to do this? Ive looked everywhere for seat assembly instructions. All I find are blurry diagrams. Thanks.
Hello my husband has this welder and is trying to find the part number for the starter would you by chance be able to tell me the part number on your starter. His was painted so the part number is gone. Thanks in advance.
not bad i saved mine from the scrap yard. Did some work on mine but nice welding machines. My gas tank was trashed hade to have a new one built clean out block flush radiator redo carb new points and wires other than that good machine when i got done lol i got some vids on yhe tube search 1vester1 you will find it
This compressor was put with an 80 gallon tank. Its a little slow for a 1 inch gun, at least for the professional aspect. But for here and there use it is fine for the 1 inch gun.
If its and i think it might be if its ABS plastic what i did is i used actual abs glue for like plumbing abs pipes i have a sonoma that this happened to it where the holes are for the two 7mm bolts. Had pretty much ALL the bits that make it up and i used the glue to fuse the pieces together i won't be so lucky actually for the passenger side tho. Someone on a s10 forum made like steel cups or something for him for his s10 then epoxied it in too. Yours is different but i was looking for one of like mine and ran into this vid
Thanks! I was able to do this without removing the actuator from the car, which was wonderful. I used a hook to grab the lever and pull it toward the front of the car while I used a screwdriver to push the dieselgeek part from left to right into place. It’s a T30 screw. Loosen the part on the mount to let it swing to the left when installing at first. I lost the spring but I called Dieselgeek which told me the spring doesn’t do anything so I left it out.
Danilo acabei de fechar um motor caterpillar v12 e são sei como ligar a corrente na bomba injectores para dar a partida de arranque no motor, quer saber como faço isto
The kit from Little Shop Manufacturing fits most of the duramax engines. Only thing that changes that I know of is if the compressor stands up, or lays down.
I’m coming up on 10,000 miles myself on a F250 and I have not rotated them because the wear looks good all the way around I don’t see why. I’m curious with the snow as well
Ive got an old 12V restorstion going on. The smaller signal wire that goes to the starter is normally grounded right? When you press in on clutch and turn key that completes the 12 volt circuit for the starter to actuate?
@@williamlogan1775 usually they are in the loom with the big battery cable that comes down to the starter. But im not sure exactly where it goes. But it only has power when the starter is cranking so it can be made to work from a couple places.
A year later, do you have any regrets using expanded metal for the bottom? Maybe you live in a warm climate, but I built a tool trailer and used expanded metal for the floor. First time I drove through a puddle everything inside was covered in mud. Then snow season came and it just got worse. I used expanded metal because there's machines inside and it's great for air circ while venting the exhaust. Now I'm looking to cover it and build a dedicated air intake for everything to use. I'm thinking of making a vehicle filter box and doing away with the individual small engine filters.
I use airsoft BB's in my trailer and truck tires. 3.5oz in trailer tires and 5oz in my 265/70/16 truck tires. You can find charts for amounts to use in each tire size online. Steel BBs they say will destroy a tire over time. JS!
I have seen glass and ceramic in semi tires. No issues. In order to put miles on the vehicle the tires have to rotate. In theory the balance material of choice shouldn't be moving that much once they are against the out side of the tire.
Make sure your stake pockets are wide enough for your flat ratchet straps to drop through. I bought some straps that the metal on the straps wouldn’t fit through (ug)
@kmac9759 yeah I bet you were 🤣🤣 I was making it more difficult than what it really was. I also didn't take the upper radiator hose off. Once I calmed down and took my time it popped right out. Then after I put the new fan in I had to take it back out because the metal clasp for the mounting screw on the passenger side came off the bracket. Fortunately it didn't travel far and I was able to get to it. This was a nice reminder of why I don't fix things for a living 🤣🤣🤣
Just installed on my audi 2011 a3, the check engine light was on and off, then got stuck on, once installed the check engine light is still on, will give it a little but if time but should the check engine light go off immediately once installed or?
I have a 2011 a3, it is still under dieselgate warranty. And I have p2015, not sure if I should do this fix or drop it at dealer for a few weeks to get oe fix.
i was going to do something like this last year for blowing out sprinkler lines I didn't really need a bladder tank for that purpose just so much pressure and a lot of cfm behind it
i always put the red dot on the valve to no led i do not have any of the kind of shaking going on with my wheels, balance is a1 to me,, but i did try it with the red dot off the valve, think i had like 6 1/2 pices on the one tire and like 4 on the rest, broke the beads, put the red dot on the valver, and now i got NO WAITS AT ALL and there is a way to balance a steel rim and winter tire with no dots aswell if you do not know and whot to know,, ask me and i will tell you
