I`ve been golfing for around twenty years, struggling to break 90. I wasn`t able to achieve an excellent round during the last 3-4 years right up until I completed reading through these golf swing techniques “mowosam press” (Google it). I am ineffective when using my irons. I could manage driver correctly but could only reach a small range...
what was wrong with it in the first place? I have a lifecycle that I am trying to fix so I am just inquiring . I know its been 4 years since you have posted this but Its worth a chance to see if it might be the same problem .
Do these things plug in at all or just take a 9V battery? I have one I am able to use by there is no resistance AT ALL. I put a 9V battery inside and the screen doesn't seem to want to work. I'm thinking it needs more than a 9V battery to run.
@@brittneyw5575 Yes some of the models do have a plug in adapter . I picked mine up on a give away and I'm trying to replace some parts so it works as well . Good luck .
@@TheCiaMKultra I wanted to thank you for responding. I looked into it and if I would just read the thing.. Says to pedal first to get it going then the screen area is able to work. I got it to turn on and give me some resistance but it's confusing. Hopefully, I will get the hang of it. The seat is pretty much non-existant so that's my next thing to fix =)
the slide of my gun catches when it fires and I have to pus it up anout a half inch to fire again any ideas on how to fix it?????????? email or text me codypotter5@gmail.com 910 393 8885
Or o rings instead of washer , might even soften the rearward slam of the slide on the valve body during the blowback cycle, and you could add them one at a time until you acheive the desired spacer effect. I hope one of these ideas is usefull as I have the same pistol and it is a weak shooter, I know that all the blowbacks I have that have a crisp hammer spring shoot much stronger.
You might be able to mod a washer then slide it over the barrel up against the valve , the put the stock spring back on . This might shorten the lenght of the blowback distance enough to compensate .
might add some equal weight to the slide? instead of increasing spring resistance I am omly guessing, not really sure if that would work, but it might be worth a try. Kevin.
