Тёмный
Lᴇᴀʀɴ DIY ᴡɪᴛʜ 𝗝𝗢𝗘 ★ 𝗝𝗘𝗧
Lᴇᴀʀɴ DIY ᴡɪᴛʜ 𝗝𝗢𝗘 ★ 𝗝𝗘𝗧
Lᴇᴀʀɴ DIY ᴡɪᴛʜ 𝗝𝗢𝗘 ★ 𝗝𝗘𝗧
Подписаться
Hi Friends! Welcome to 𝗝𝗢𝗘 ★ 𝗝𝗘𝗧's channel!

On this channel I show how to fix broken things at home, as well as how to do home renovations.

Nothing irritates me more than wasting time. If you no longer want to watch 15-minute videos on, for example, 'how to replace an on/off switch' in your home you are in the right place.
Комментарии
@geecrawdad
@geecrawdad 6 дней назад
If you screw those screws straight in, is the rafter or truss wide enough so they all go in to the truss completely?
@JOE_JET_DIY
@JOE_JET_DIY 6 дней назад
At the very top yes, you screw them into the ridge board. Below that it's a little more difficult. In fact, 2 screws are able to hold you steady. However, the manufacturer in the manual recommends doing it as in the video.
@geecrawdad
@geecrawdad 6 дней назад
@@JOE_JET_DIY Ok, thank you. It should make sense to me after I get the ridge vent off. I'm using the HitchClips and D minus anchors so they are not as wide as the anchor used in your video.
@JKazama182
@JKazama182 16 дней назад
That’s not a repair!!!! 🤡🤡🤡 you tricking the ECU’s readings! P0420 could several problems, one being that the Cat is getting clogged. As an Auto technician, thanks for future customers! 🤡🤡🤡
@JOE_JET_DIY
@JOE_JET_DIY 16 дней назад
You're welcome! You are absolutely right. Your real repair, however, is to replace the catalytic converter/converters. Im sorry but few people driving a 20-year-old junk can afford it 🤡
@JKazama182
@JKazama182 16 дней назад
@@JOE_JET_DIYokay you understand that by doing this “repair” you’re teaching people to mask the vehicles problem for it only to damage later on and cost MORE money then taking it to a muffler shop to replace with cheaper universal cat. Teach people that. Teach them that there are independent shops, that they don’t have to go to a Chain of shops or a dealership. Or you teach them how to do the actual repair themselves. Buying parts online and the proper tools.
@robertjones3477
@robertjones3477 18 дней назад
Thats old as the hills been doing that for donkeys years 😂
@JOE_JET_DIY
@JOE_JET_DIY 18 дней назад
😂
@Mi1000L
@Mi1000L 22 дня назад
La herramienta está mal utilizada
@JOE_JET_DIY
@JOE_JET_DIY 21 день назад
Hice esto a propósito para ver cuántas personas lo notarían. Parece que solo son 2 de 10k
@JOE_JET_DIY
@JOE_JET_DIY 21 день назад
Hice esto a propósito para ver cuántas personas lo notarían. Parece que solo son 2 de 10k
@larryjohnson3840
@larryjohnson3840 23 дня назад
I’ve always liked using channel locks pointed in the right direction.
@JOE_JET_DIY
@JOE_JET_DIY 23 дня назад
I did it a bit on purpose 😁
@scottchristner4242
@scottchristner4242 23 дня назад
I’ve always used the gas tape.
@scottchristner4242
@scottchristner4242 23 дня назад
Do you need tape or pipe dope?
@JOE_JET_DIY
@JOE_JET_DIY 23 дня назад
It should not be used
@ryanvaglica1428
@ryanvaglica1428 23 дня назад
You forgot the pipe dope
@JOE_JET_DIY
@JOE_JET_DIY 23 дня назад
It should not be used
@Dogbitchs95
@Dogbitchs95 Месяц назад
Bro no
@stevenglaze1998
@stevenglaze1998 Месяц назад
But that's a PEX water line and ball valve it looks like
@halim9588
@halim9588 Месяц назад
Just use gas lighter
@rolandomartinez9299
@rolandomartinez9299 Месяц назад
Bru u did it from one side rlly gonna make ppl think they need that trash😐
@JOE_JET_DIY
@JOE_JET_DIY Месяц назад
What if you dont have access from the other side, bru?
@KiloFeenix
@KiloFeenix Месяц назад
Omg the world it's getting lazy
@КирилФедосов-н5й
@КирилФедосов-н5й Месяц назад
Ключ для кого идёт в комплекте?
@JOE_JET_DIY
@JOE_JET_DIY Месяц назад
What if you don't have it?
@jorgeacosta5571
@jorgeacosta5571 Месяц назад
Es mejor con una llave L
@JOE_JET_DIY
@JOE_JET_DIY Месяц назад
Sure, if you have some
@KyuKraft
@KyuKraft Месяц назад
Don’t do thattt
@JOE_JET_DIY
@JOE_JET_DIY Месяц назад
Why?
@Goodlyk
@Goodlyk Месяц назад
Ага и сломать сверло?
@JOE_JET_DIY
@JOE_JET_DIY Месяц назад
No...
@daria_curly
@daria_curly 2 месяца назад
Cool
@SonOfTheBlueSky
@SonOfTheBlueSky 2 месяца назад
Thanks
@JOE_JET_DIY
@JOE_JET_DIY 2 месяца назад
Welcome
@magnarez
@magnarez 2 месяца назад
????? Why some screws and some nails????? Just use all acrews. Fadter, cleaner, easier to remove, more secure and quiet.
@JOE_JET_DIY
@JOE_JET_DIY 2 месяца назад
I showed the nails and screws to show that you have options.
@JOE_JET_DIY
@JOE_JET_DIY 2 месяца назад
This video is a part of long version one. Thanks for a comment 👍
@BumblebeeARG
@BumblebeeARG 2 месяца назад
👍👍
@Paradise-Lost
@Paradise-Lost 2 месяца назад
Work with no fear
@SonOfTheBlueSky
@SonOfTheBlueSky 2 месяца назад
You work fast
@JOE_JET_DIY
@JOE_JET_DIY 2 месяца назад
😊 thanks
@MoreMoneyMoreTime
@MoreMoneyMoreTime 2 месяца назад
Cool
@JOE_JET_DIY
@JOE_JET_DIY 2 месяца назад
Thanks
@chrisfairfield1929
@chrisfairfield1929 2 месяца назад
Nice addition 🐍
@JOE_JET_DIY
@JOE_JET_DIY 2 месяца назад
Thanks 👍
@SonOfTheBlueSky
@SonOfTheBlueSky 2 месяца назад
Thanks!
@JOE_JET_DIY
@JOE_JET_DIY 2 месяца назад
Welcome!