@@eradicatinglove no i did what you said then it said error so i did it again and it did it again and i pressed eummmc and now my switch doesn't want to turn on
My problem when i start some game i get black screen error code 010000000000000d. New game yakuza kiwari get error to. But all nsp forwarder work fine like ppsspp, mame, psx,
This worked for me, but one drawback is there appears to be no way for me to access the SD card whilst the Switch is connected to PC via USB?? When I connect the Switch to PC detects that a device is connected, but it cannot see the SD card in any of the USB drives. Have you added in any kind of 'usb transfer' mode or MTP transfer setting that will allow me to access the Switch SD card whilst it's connected to my PC via USB? I really don't want to keep manually ejecting the physical SD card and inserting it into the PC On my previous modded switch I would simply open DBI Installer (MTP mode) or Tinfoil and my PC would recognise the Switch SD card and allow me to drag and drop files
You can add dbi again . Or you can use the usb file transfer that comes with atmosphere. Last if you reboot to payload you should boot back to hekate and you can use the SD card tools to access the SD card too
@@eradicatinglove hi thanks for your reply. Sorry I thought the USB file transfer option within Atmosphere wasn't working as I get message that I initially thought was an error message (I also wasn't aware that there's an SD card tools option within hekate - I'm such a noob). I have now installed DBI and can confirm everything working well, thanks for the easy to follow tutorial Do you have a tutorial on how to copy save files from one modded Switch to another? My understanding is that save files are saved on the switch console rather than on the SD card so they can't be easily drag and dropped to other consoles?
@highnoon7097 to be honest I don't really know if you can copy over files . I've never done it . That I know of yes you can long as it's the same switch because the Nintendo folder is specific to your switch . But yea should be good to copy over. Might be harder if your sd card is fat32.
Dude, thank you very much. I'm from Brazil, but I don't understand what you were saying. I followed it step by step and it worked out really well. I just have to thank you.
What can you do if you're stuck on a the red screen with the GBA logo? I used DBI to remove the ''an update is required'' popup but when I launch the GBA 1.3.0 app it just stuck.
Wow, I just tried this and it works fine now. I guess I download a wrong/corrupted sigpatches and it could not run for me. I will send you some coffees later. Thanks a ton bro and have a great evening.
EDIT: I just watched your recent video and got mine working ow. Thx again. I think I must wait for the fix and can't use this . Because I upgraded cfw 19.0.0 to Emu MMC and got stuck in "A fatal error occurred when running fusee. Unable to identify package1!. Thanks for sharing your help.
hi , i have installed from comunity , the games what you added are not working , only the original titles , nes is ok but snes not , and sega games are controller issues . could you please help me ?
Tinfoil hasn't been working for me and I did everything you did with the files and can't find the forwarders for the tinfoil I don't understand what's going on when you said yours has been working.
Unfortunately I don't have this anymore sorry. Next thing i have is the retroarch full setup . It's 40gb of games preloaded. If your interested i can send that link
do you have a discord probably? walk me through the process, i have a ams 1.6.1, with 14.0 firmware, and i never have the knowledge to install cfw manually
will this atomosphere still work with 18.1? i have followed your steps is it boots fine though tinfoil doesn't work. have tried reinstalling but still gives me an error "could not start the software"
@@eradicatinglove apologies where can i get the sigpatches if they are missing, or even your original host files so i can start fresh? - i might try updated to 19.0 with your aio,switchupdater
@lolaazour i dont no where you can get the sigpatches i don't use them . I use syspatch so it should work . But here's the video to the original pack thay worksnwith 18.1.0. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BA9Wl-49RUA.html
@@eradicatinglove i updated firmware to 19.0 - updated hekate, and atmosphere according to your files. i thought sigpatches were missing so i found latest ones that are compatable with 19.0 but tinfoil still wont boot.
If in getting stuck on the booting splashscreen would that have to do with the microsd I have? It isn't on their list but it's 1tb. Also my switch is on 19.
i googled and some sources stated that hwfly modchip mv1.6 cant be updated firmware... is that true? how can i know my firmware updated is successful? do modchip update and this is different?
@@eradicatinglove You want the whole story? Haha, it's a long one. To keep it short, I bricked by going to 19 and decided to reload a backup copy I had onto a larger SD card (I'd wanted to upgrade my storage anyway), but I think you're right that it apparently didn't copy the emummc correctly. I followed all your steps until I got the error, then decided to go back to my original SD card. For some reason, it works again, so your video worked for a reason I don't quite understand. It's wild. The system version says 18 and my CFW all works as normal (minus going back to atmosphere version 1.7). But now I get the blue screen of death if I ever try to load the stock app which isn't the end of the world. I'm wondering if upgrading my Atmosphere back to 1.8 will make it work again, but part of me is like "just leave it alone, Mikel, don't push your luck"
Yea copying over emummc isn't such an easy task . I don't like using emummc but that I know of there's a way to migrate it properly. Copying over isn't enough. I would start over in my opinion. But yea thats most likely the problem. your files not working. If you can get back to hekate. Deleting the atmosphere and bootloader folder then extracting my latest pack should help . But whatever you decided good luck
@@eradicatinglove hey. Thanks for the replay. Will your update also work with tinfoil or do i need still to downgrade everything. I recently bought an switch v1 so I have no games whatsoever on it.
My OFW and CFW work fine, I also dont have issues when booting into the OFW but when i launch the CFW i get the following issue Failed to match warmboot with fuses if you continue sleep wont work! When i proceed with the powerbutton it boots into the CFW without any issues How do i fix this issue, although it doesnt bother me rn
Hello sir, can you please help me? I am planning to buy a new Nintendo Switch OLED but I was thinking, can't I just copy paste the ROMs I downloaded from internet and the MiG Switch start playing it? Specifically speaking about .NSP files. Also, will this work with a just-unboxed Switch which is totally untouched? Do I need to mod it instead? Idk how to mod yet and god forbid I don't even want to talk about modchip installation. Please guide me on this
Hello . Yes you can do this with the mig. And yes you can fing the files you need online . The problem with this though is finding the files. There's so many sites. And chances are you probably won't find the files to the games you want . You have to hope someone did this. But I have seen site that have them . Another thing is . This is likely to get you banned. You will not be able to play online . Or update games. Good luck
This is hopefully a look into a better universe where we get something like this soon. To quote Noah from XC3: “We embody hope.” I think Shion and co would agree with Noah and Mio.