With your directions I did this to my daughter’s 2015 Golf. The dealer quoted her over $500 to fix this problem. I used my trim tools and 10m socket. Total time was less than 20 minutes at a cost of zero. Thanks very much.
Mine had this issue suddenly, I was going to call my mechanic, but fortunately, I found this video! I'm going to try fixing myself tomorrow before work. Thank you for this!
Today, I lifted the rear of the Beetle and rotated one wheel in all gears. When I rotate one wheel, the other turns in the opposite direction at the same speed. However, in neutral and 3rd gear, when I spin one wheel, the other turns much slower. Does this mean that 3rd gear is engaged? If so, how can I disengage 3rd gear without removing the transmission? because i have problem when in neutral and i want to move the car in the garage the engine spins . i shifted gears with no oil in the transmission many times , maybe thats the cause of it
My Beetle’s engine turns when I move the car in the garage, even though it’s in neutral. All gears work, but I have to press the clutch to move it. It’s a project car and not running yet. This problem started recently, about two weeks ago. I swapped in a 1.8T engine and kept the Beetle flywheel. Two years ago, I removed the transmission oil but didn’t refill it, and I’ve been moving the car around the garage without issues until now. Could this problem be due to the lack of oil? Could something have broken because there was no oil? I read on forums that maybe a gear is engaged-how can I check for that? Or do you have an idea of what could be causing this problem?
@@SyncroMotoring Update: This worked! It was a little bit of a pain, the clip that holds onto both cables kept coming undone just while I was trying to get my socket on the nut, but once I got that reattached and was able to get my socket on well enough, it tightened right down. I wonder what causes the nut to come undone in the first place, but my handbrake has never felt so tight and solid. Thanks for this video!
Did my whole chassis as well. Didnt do the cleaning process as I had my chassis blasted first, but what a great product for the value. Recommend the cavity coater as well down the tunnel and napoleons hat area
Looks very similar to POR15. Even the same process… Step 1: Degrease Step 2: Metal Prep/Etch Step 3: Paint Don’t Shake Don’t use directly from the can…pour into another container. Seal the can extremely well. Dries from a chemical reaction rather than evaporation of Volatile Organic Chemicals.
@@gutshotgriz3936 the originators of POR15 sold the company and then created rust seal from what I heard. That’s why it’s so similar and better in some cases. POR15 finish is glossier when dry.
That happens aswell, but most of the time it’s the cables that have stretched . A Quick Look to make sure the caliper lever is sitting on the stop while the parking brake is down ,is a good idea 👍🏻
Looks like this swing-axle was converted from early model gears over to 002 late model gears and 72 case (an excellent choice in my opinion!). I look forward to the rest of the build! Subd
En mi caso solo suena la radio Fm en Android no suena tengo el cable auxiliar conectado pero solo me deja entrar en Aux Rear.... No me sale el Aux front tampoco me deja poner CD solo Fm,Am y Aux rear