Mostly posting videos of my journey to be an FPV drone pilot. I usually fly 4 packs / session and I try to post at least some part of every session. My desired goal for each session is to get at least one full "good" pack. I only cut in the footage if I have to but I prefer not to... Also, I'm usually not using any video stabilization... :)
My over all motto in life: If you can't find it, make it and share it!
Thank you! I used "templates" like in the picture in the link and lots of patens... Just kept adjusting until it where perfect. :) I had the whole track-system printed on paper in live-size to be able to compare the physical track to the drawn one. photos.app.goo.gl/ehTMURABpxqtY58j9
Hehe, HA är grymt... har "hela huset" (i alla fall så mycket jag får, för resten av familjen) uppsatt och automatiserat... Men det är en utmaning att få allt "seamless"... :) Speciellt när alla i familjen inte tycker att det är bra... Och om det falerar 1 (en) gång (spelar ingen roll hur länge det funkat helt automatiskt innan dess) så är ALLT SKIT och det var mycket bättre förr... :)
@@MrSnille haha! 😂 Lite samma här. Har bytt ut och byggt på vartefter man gör om nått hemma. Eller ibland för ren nördighet. Har en salig blandning prylar, men peppar peppar så funkar allt väldigt bra. Anledningen att ja får greja är just HA, att ha allt på samma ställe. Va världskrig när man hade typ 3 appar... 😁 Men som sagt, den dagen de inte funkar att tända nån lampa så drar kriget igång! 😂
Hi, you can't... You have to build it, all the instructions can be found in the description of the video, including the templates for all the rails. But it's a lot of work. :)
I feel you about winter weather. One year I spent a few months in Australia. I went from Summer to Summer to Summer! That's the life! As usual you paired the music to capture the vibe.
@@MrAlgefors Ah, jo känner till den. Den liknar "Bumblebee" som en kompis har... CineSplore flyger cirklar runt den med. :) Jag valde att bygga eget efter att sett KababFPV:s genomgång: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-m318_eRM1sA.html
Hi Erik Could you confirm the elevator length is 369.1mm as indicated on image file, & what was the diameter of aluminium tube, before I order it. Nearly brought all parts together now, the stand that supports the Ball Sculpture what thickness of wood did you use and the overall depth of the unit of the stand if that is possible. Thanks Erik sorry for all these questions. regards
Great skill , love the slow movement of marble, not all want to live in the fast lane to appreciate beauty. Well done, quiet hypnotic to watch the elements move. Could I ask if the 3d parts download indicate how many of the individual parts need to be printed. Also are the track printout on A4 paper or larger. Time to start collecting component’s. Keep inspiring others to test their skills.
I have pan and tilt on my RC car but never thought to do roll aka lean. This is a good idea, maybe ill try it out. Looks like you saw this over at @Josh! Tulberg 's channel. Very nice implementation. Feel free to check out some of my vids. I recently upgraded to DJI air unit as well.
You can find them here: www.snille.net/download/bstemplates.zip I'll also add a link in the description. It's all scanned from my originals... So they are a bit dirty. :)
lol. This is awesome! Well done. I'm not familiar with the Maestro programming language, but if you were to code it in the Arduino language, you could probably get rid of the ball sensor completely: Just store the projected location in ee-prom, then utilize the floating analog input-pin for a more random-random. Very cool execution regardless. I love the concept. Maybe the next iteration could have the arm actually manipulate the track path.
