On the outer edge, where the fender meets the front bumper I see 4 holes with connectors on my OEM replacement fender. Around the 8:30 minute time in the video you said that there was only one connector that needed to be removed. So why are their 3 other holes in the fender? I was expecting 4 connectors to be removed not one. I think the other three holes are for connectors between the fender and the front bumper that also need to be removed. Is that right?
Hey sick video! I’m doing an install on mine and I have the same tape but it doesn’t seem to adhere to the lip at all? What did you do so that the lip can stick firmly in place ??
Make sure there’s no paint or primer on the mating surface of the lip, make sure it’s smooth bare plastic. Use Acetone or “nail polish remover”.. the tape I used is the 3m exterior molding tape, should work for you! Make sure everything is dust and dirt free and completely clean
Also keep up with the videos! Inspires me to do a youtube and vlog. i have so many crazy car meet clips, fails, pd drive bys, clips and photos that possibly could go viral on tik tok or youtube but i’m not sure where to start. one of my friends makes money interviewing people and he’s good with amendment rights and films videos about himself and he’s made some youtube money. What is your best advice to start, i have an ig page with almost 800 followers for my local car posts but i have hardly posted on the page and not sure if i should start my yt by posting reels and photos first and if i should be doing some vlogs at meets
just saw your comment on austin dunhams short and I saw that you’re a car guy and have a clean build and decided to give you a follow+sub besides the fact that your comment on his reel is super relatable because that’s at the position i’m in right now and i’m turning 21 next month. But I have been making great progress since a few years ago whenI was 18, and because of my connects with the car community and party scene yk how difficult it can be and confusing with the way the car sluts are and party girls I don’t even want 😂. The wrong chicks flirt with me I just don’t take it too serious and see how far it gets and enjoy the vibes while it’s there lmao.
Thanks man! I’ll try the OEM one from the original sway bar. Hopefully it fits, since this is an after market bar, and might have a different bend and shape
Good luck. I'm doing so much work on my RSX now. Can't go wrong with OEM, but I used Hotchkis for years without any issues. Rebuilt my suspension last month using MotoIQ's recommendations, so I'm using all Whiteline stuff now. Good stuff if you can afford it...I'm still paying for it 😅
Nice man! I heard of whiteline, they seem pretty legit. Not investing anymore money into the car unfortunately, not sure how much longer I’ll have it. I need something bigger and comfortable
Only thing I’ve done since is an aluminum motor Mount in gun metal color, and swapped out the Soft tires for Super Soft tires. The front diff stripped out, so I’d highly recommend getting some higher quality diffs if you are really planning on building it up. My next plan for it is a custom center prop shaft and a custom chassis plate to extend the wheelbase to 1/24 scale size. But with other cars on the bench the wltoys is on the back burner. Thanks for watching man those cars are really cool
Couple people told me the end links were not good, but haven’t posted an update until now. I did end up packing them with grease, and it made the noise go away, but I’m looking for some high quality ones.
I can explain lol I break breaker bars easier than walking in the park. My Stanley ratchet and cheater bar has zero flex. I use my breaker bars for everything else. Hope this helps explain it
This was an amazing tip. I bought a spark plug socket and the spark plug wouldn’t come out. I had a spare 5/8, removed the grommet and boom, helped with the install. I used the other one to remove. You’re the best for posting this. Thank you!!! ❤🥲
I was scamme by Union Hill Animal hospital in Kansas City Missouri. Brought my cat in for mouth pain.Vet barely glanced in his mouth but gave an estimate between 650$ and 1500$. Told them I needed the estimate more accurate. Another vet did another cursory exam,but couldn’t give a definitive estimate (he was complaining about his student loans) I had to get the cat in for surgery and was charged 1500$.This amount was 3 times what equivalent work would be for human services. I had delayed his procedure and stressed him unnecessarily with repeated visits An internist once told me a good veterinarian is harder to find than a good human doctor.So true.
So a better way is and I just did this... If you have the grommet that look like a cone, leave it in and cut into it several times then the grommet still work but wont lock onto the spark plug.
It said to press the learning key for 1 sec on the ”host”. Both my keys was connected thankfully. But im guessing that the ”learning key” is the reset button he refers to in the video, because thats the only button i can find on my ”host”(the main computer box). My kit is a little different though, because i have a second cable connector that controls blinking lights and trunk opening(that i cant figure out how to get working).
I don't have a way of getting any carb/brake cleaner since my 95' Accord Wagon won't stay running. Do you think I could get away with 93% Alcohol and a toothbrush/rag? 🙏🤞
Yeah sure try it, Pour some on a rag and clean it out, don’t pour directly on it.. get as much carbon build up out of it as possible and see if it helps
Mr. Integra!:) like to ask you about the cam sensor that you replaced, the intake and the exhaust . Are they both same sensor???? Thank you. Hope to hear from you soon.
@@IntegraDIY Thank you.👍 I ordered 2x BOSH . Ok brand? I'm replacing both. Thank you for your video 👍👍 Any issues / engine light came back after you installed ?
Could you tell me the brand name and where you bought the PVC membrane? I purchased one on Amazon, but the spring pressure was much higher than the original.
I purchased it on eBay. It was only like $8. Check and see if your original spring works with the new cap and membrane. My original one seemed fine but swapped it anyways, it was the membrane that just had a lot of build up
I’ve promoted people products before, but I can’t do it without an agreement, such as a discount on the parts I show in the videos. That’ll be like Mr Beast advertising Samsung for free but on a much smaller scale. Nothing in it for me, I won’t put $700 in someone’s pocket for free. Hope this makes sense. And thanks 🙏