I would like to welcome you to my channel. I get in to a lot of things from tools, ATV, lawn mowers, mini bikes, electrical wiring and many other things. I get in to all sorts of stuff to keep my my mind busy, like comment and subscribe. thanks for looking at the channel.
@@SmittysSmallGarage Nice. I do not have the building experience to even attempt to do something like you did. I had to take the damn cart 80% apart the next day after I bought it and built it because I put the side brackets on upside down. Granted I built the cart after work one night around 1am in the morning because I could not wait.
@@m.t.v.7934 There is a (Stacked Cart Gang) Facebook group. Some of these things they build out of these is amazing. I woud have been lost aswell if not for this group 😂
You telling me you are in front of a tool cart and the best you can use is a pair of channel locks and then you use them backwards? Sir you are my hero!
I haven't really did a follow-up on these wheels being this is wny and we are still getting snow in April lol. But these wheels are so much better than the stock one's in my opinion.
As for your defective aerosol cans, I would buy the same exact cans to keep and return the defective ones the next day with the good can receipt. Why should you get stuck with them? Just sayin 🤷
I do not recommend this brand. I went through several of them on Amazon. Customer service would not send me any parts under warranty for them. They just told me to return It to Amazon and to order a new one. They all leaked horribly.
I was going through the Amazon reviews before I bought them, There were a few people writing there's were leaking and other problems. These haven't started yet (fingers crossed) We used Zep ones at work they were good but pricey.
It doesn't look like they sell that Series anymore, But the have replaced it with the U.S. GENERAL 15 in. End Cabinet, Series 3, Green SKU 70354 or whatever color you need will be a different SKU. hope this helps.
No I didn't have to, The only thing I had to get was the adaptor ''KASLIGHT Ceramic H4 Sockets H4 9003 HB2 Wiring Harness H4 to 3 Pin Adapter''. One had angle blades and the new one was straight blade plug in.
In this video you can see, ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Jeg4y90e08s.html But the piece of aluminium I riveted in there I had to take out and just put the black plastic cap back on. I did my boxes the hard way. They were all ready cut to sit on top of my snap on box side by side.
You mentioned on more than one occasion that these wheels came "straight from Japan". Fact check: Meepo is based in Hong Kong, which is a large village in a Country called the "PRC". Through my research, I've identified the full name of this Country to be the "People's Republic of the Congo". If you would like to know more about this Country, I would urge everyone to watch a fantastic documentary made by the African Historical Preservation Society, aptly named "Congo". Starring actors Ernie Hudson, Tim Curry, and Bruce Campbell (Bruce worked on the beginning of the project) It's a raw and gritty docu that will really open your eyes as to what's happening deep in the jungles of the Congo. On a sad note, Tim was killed during the making of the film (warning: his death is actually shown in the documentary).
My wheels Depart from facility to service provider ShaTian, DongGuan, Is Dongguan in China or Hong Kong? Dongguan (Chinese: 东莞) is a city in Guangdong province, China. It is in the Pearl River delta. Dongguan borders Guangzhou to the north, Huizhou to the northeast, Shenzhen to the south, and the Pearl River to the west. Dongguan is an industrial city. Guess we were both wrong lol
I have never used fluid film before, So I'm unsure of the consistency of it I don't want to give you false info. I have only used them for WD40 and CRC Brakleen so far.
I would get them from ShredLights SL-300+/R1+ SKATEBOARD COMBO PACK Standard + Starter Pack of Mounts). The two on the bottom are SL-FX+ They can only be bought on there site. All 6 of THESE ARE FOR THE BLUETOOTH, Ones you can control with your phone. I just wrote a review to ShredLights Today about how amazed and how nice and bright they are little spendy but I think it's worth being seen and to see where you are going.
Yes they do. I went around the back of a local store last night full of acorn's and small sticks little scared at first but zipped right through. Hope this helps
I ordered mine on september 1 and they were delivered around the 10th. Felt like it took forever, Some people said there's took a few weeks. They are worth the wait, So much better than stock.
Hey there, how did you modify your factory Western Suburbanite plow harness to still let you run your trucks headlights plus the plow lights when on high beam?
Honestly @Sparky20Simulation I wish I could tell you, I bought the plow used on the market place. It was set up for a 2003 so I had to buy a harness for a 2010. When I plugged everything was that way. Sorry I couldn't tell you more of what is going on. I know it's not right but it works. It works great with a small plow that doesn't block your headlights like the Suburbanite . Hope you can figure it out.
I wanna get the same setup I think I messed up my esc. By putting high gearing that's not recommended so now the servo acts up when I hit the throttle. Servo basically goes to one side. So I want a new esc but I might wanna change the stock motor also
@debarber87 I was so happy with this set up when I pulled the trigger. I called Castle Creations told them what I was looking for and they didn't disappoint. Thanks for checking out the video
I wanted to know more before I do the same. Can you over gear it. I put 24/46 gearing and I think I messed up the esc I works until I hit the throttle then the servo goes all the way to one side to the point it starts making noise like it wants to snap. I know the max hearing for speed is 20/46 but I wanted to see what 20 46 would do. But I wanna know if this new setup could handle that if not what u recommend? And did u need to customize anything to add the motor and esc. Thnx for the reply
@@debarber87 The servo thing I'm unsure about, I've seen videos of people running 24/46 fo top speed. I'm running 14/68 and it has a lot of power and speed. like I was saying when I called they were super helpful. This was my first electric Lipo buggy, coming from only having nitro cars and trucks I had a lot of questions for the poor guy. Sorry if I'm not much help.
Thank You. I completely forgot about that. Sometimes you get caught up into tossing parts at these small engines. I did end up ordering one maybe I can save it and send the new one back.
Yes, I have a few videos that I'm working on editing of the resto. It is finished, I haven't found a place around me to ride it yet. It has been a garage queen 😂 as my friends call it. I should have videos up sometime soon.
On this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nLRG3SqVEkk.html around 6:43. you can see they were both on top of my Snap on box to save room in the garage. I didn't end up liking the look of the green and red. But I liked the look of the stacked boxes, but those bar's were cut from the first set up on top, but it is still sturdy. moves around great. thanks for the comment and checking out the video.
😂 Me too it's not easy cutting up two new toolboxes. It was also a pain to do. I had to edit out so much for time wise. Thought it would be good to see some things most don't show. It's not as easy as people make it look. But overall I like the way it turned out finished part in second half. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-89n_BIR9_74.html Thanks for watching.
I have two Fiero’s! My driving car is an 85 GT v6 4 speed notchback then I have an 87 GT parts car that I pulled the motor out of and a ton of other parts. That’s a wicked setup!
It was also a pain to do. I had to edit out so much for time wise. Thought it would be good to see some things most don't show. It's not as easy as people make it look. But overall I like the way it turned out.
I remember seeing a young mechanic on Instagram did something similar stacking two of them and he ended up putting side lockers on both sides. The Set up looked awesome.
