I was already gonna buy one and get it from air gun of Arizona, but I definitely am now… not to worried about issues with the gun… Huben K1 carbon and this going in my safe
I am going to update you when I get the chance but I think this is the problem I have, filling the tank just lets air out the barrel, it blew the contents of the plenum on my cheek when firing and now won't fill. I have checked everywhere else, forgot about these two little buggers....
I love your rant on Element scopes. I had one and I threw it in the dumpster! Literally! I just think if you spend 1k plus on a scope you should NOT have to send it back because of poi shift. Poi shift due to the reticle visibly shifting just from a finger tapping on the body.
@@charlespeffleythat's the thread for the shroud end cap, sadly the .357 is the only dynamic that does not use the same thread on the shroud end cap as it does on the barrell/liner end threads
Hey Chuck. If I wanted to shoot heavy 22 slugs, would I be missing much if I ordered a 22 800mm barrel for my Impact M3, rather than buying the Dynamic in 22? Thanks
I just got my 35 kit. Can you tell me if they used tread lock on the transfer port? Also, did you change the springs? What are your settings to get 200'lbs? I have the MK2 also.
Это проблема не только FX во основном во всех псп винтовках это вечная проблема дело в том что есть дорогие винтовки есть дешёвые винтовки и у них проблемы утечкой разные денежном эквиваленте это маркетинг друзья по не счастью 😃так что не парьтесь надо вам дорогая проблема берите FX если нет то крикет дело ваша (это сугубо моё мнение)
What is better, from your point of view and experience, the Impact regulator or the Huma regulator? Because the regulator in my gun broke down, and I do not know what to buy the Huma regulator or the Impact regulator
I have a small leak from the atmospheric hole and I have changed all the o rings . I Changed more than 20 but still with the leak . I changed a couple which were white but I did not have white ones so I put the black ones still with the leak .
These guns are very accurate. They also leak all the time, and a simple o ring failure can lead to hundreds of dollars worth of damage. That said, these guns aren’t worth a shit unless you’re rich.
I bought a 35 Impact just for fun so i could try break tree branches but i find its not so easy it takes a dozen or more shots to break a 5 inch thick branch.
How are you achieving above the average in velocity? Most people can only get 156 FPE with compressed air using a 700mm barrel. I would think if the other guy was only getting 925 fps that you must be using an 800mm barrel and some helium or something to get 194fpe; but it’s just a guess…
So I have developed a leak in the same spot. I can't seem to get the screw out (some sort of nuclear locktite). I've tried to heat it a bit with a solder iron on the screw, but still not getting it. The 1.5mm wrench I have isn't the best either. Any suggestion on getting this thing out? Thanks.