This channel showcases mainly quadcopter and quad related accessories such as cameras, buzzers and radios. Tutorial videos for these items as well as videos of flying for fun and scenic shots are also part of the chanel. I learnt a lot from youtube videos and this is my way of giving back to the community. Contact-shirdiali@gmail.com
Let me share what I did to get mine to work. I used the Matek Systems 90db 5v loud buzzer. I soldered B- and B+ from buzzer to B- and B+ on board. Then, I soldered the 5v from the buzzer to the + power rail and the Gnd (ground) to the - power rail. I'm referring to the + and - power rails that are in a row and have multiple points for addons. The buzzer also has an "Aux", but I did not solder anything to that. Works fine now. Thanks Shirdi for the video, it helped me figure out the power rail part.
When you first start just practice taking off and landing for a while maybe use one or two lipos on this from different heights before flying all over. Practice holding the drone steady and slowly lower the throttle until it touches the ground.
@@stoneydownparkcctv6625 I am not sure what you mean drifting away... Two things... Keep in mind that it's not a GPS drone that holds its position...it requires constant adjustment from the sticks to keep it steady... Wind etc moves it. However if you are in a location with no wind etc and it's still drifting then you need to use the trim buttons to adjust it much like you align a car.
This is how animals should be farmed, in their natural environment, enjoying life until we ready fuh ah bbq pork belly or some crispy skin roast pork lol
Shirdi....this was beautifully done. Thank you so much for this. Being stuck in Florida because of Covid and missing the festivities at home for Ganesh Utsav has been hard but looking at this gives me something to be so happy about ❤
Shirdi Ali got it working again turned out my fc was fine mt pdb was fried the fc wasn’t getting enought power to turn on i followed the leads for the lights and soldered the wires for the fc to it and it works again 👍🏻
Hey there .. so youre telling me if i lower my gyro to 0 it will become full acro? I dont know how gyro works all i know it makes less self stablised .. what if i go negstive in gyro like -20 .. what would happen .. and what if i go max in gyro souldif have the ultimate most stabilisation?
Hi....i wont exactly say full acro. I think there is some small degree of stabilsation still ....but it flew very close to full acro mode...kept its angle...perhaps the pre programmed pids were low that made me feel it was much easier to stablise than an fpv quad. I dont know abt negative gyro...never tried it and sold the quad now. This was still a good learning experience like a step in between full fpv and toy quads
TuccoBenedicto honestly i would say they started to loose power and had one with a dead cell. But in all fairness as i got better i started too push them more so i feel i wanted more. Like i said...good starter batteries but higher c ratings is needed as u get better... hold up to crashes good too
Shirdi Ali Thanks, I was interested in the newer battgo smart battery and wondered how the chemistry in the older style ones in your video were as the latest ones haven’t had much time to really be tested. Thanks for the honest answer.
@@shirdiali sorry 4 being late the fix it to exit out of shot and do into one shot, after that calibrate them, switch it back to dshot when you are done
I noticed you’re not using solder flux does your Sauter have flux inside of the wire because without fox I cannot get Sauter to stick at all I ruined a quad trying to Sauter back on the battery connection not having flux I burned the board trying to get the Sauter to stick then I later found out why it wasn’t working because you need flux and the wire I was using did not have flux inside
Wow mate awesome stuff, I have just got on the fpv train and am loving the ride. Been watching your first fpv flight vids very cool mate. Just subbed to ya my fpv brother :)
You might know this by now but you can change it the antenna. It's called an ipex connector and you can get an 8 pcs set of spare antennas for like 10$ on Amazon. Thats what I did.
