Your sprinkler gets hung up at the end of the arc. Your spring in the reverse mechanism could need replaced. Or the trip mechanism could be binding up.
DON'T BUY MOEN. When it jams, and they all do! You have to order a special tool because they don't have the alan in the bottom. So you will not be able to use your sink for several days until that arrives because it's not included in the original box! Absolutely stupid! You will regret buying this poorly designed bullshit.
Does anyone know if this particular stove has a “timed cook” feature? Not to be confused with the timer/stopwatch feature. Rather, once you put the item(s) in the oven, you can set the time and the oven will “shut off” once that timer has expired? Thanks
The water diverter push button will be stuck after 12-24 months of usage. Basically the o-rings inside the push button need to be re-greased! It is very easy to repair/fix (or better term, maintenance), open up the push button inner push rod (cooper parts, clean and grease it up and grease every o-ring during the operation - of course, use the silicon grease!) -------------------------------------------------------------------------------- You need to take off the shower system unit (unscrew the top connected pipe and below bar anchor to the wall) You see the push button cap, there is a hole on the side of the cap, pop it out, disassemble whatever you found. Now, the inner push button unit, since you disassembled on the push button side, you see the white push plastic rod, you see the lockdown cap with three hole, unscrew it! Now, on the other side of the diverter push unit, you will the copper rod, PUSH it little hard so the other side (white plastic rod) will be popped out. Disassemble the inner push button unit, you will find it a white plastic part was screwed onto the copper part (valve part), you push the white push rod you will see the push rod (copper) being stuck,,,,,unscrew the plastic part from the unit, be careful, the inner push rod of the copper unit might be fallen out with a long/big spring (same thing with plastic push rod, you might find parts fallen out after unscrewing it from copper part, remember how they were assembled so you will need to put them back). Now use WD40 to clean the copper, use white towel or paper to clean the inside of copper parts , use silicon grease to grease all o-rings wherever you see during your operation! Assemble all everything back, test it by pushing white plastic rod side, you see the other side the pin move 1st level, 2nd level and 3rd level! (You could test this by reassembling the inner push rod by screwing the plastic rod back to the copper part and push the plastic rod you will see how it's moved and can confirm whether it works or not!) I am happy to fix what thought of having been broken! - it is easy, let's do it! Good luck!
A question for people who have this model: I just got this a couple weeks ago and when using the convection bake or convection roast the temperature display rises normally until it gets to 318 degrees then pauses. A couple minutes later it beeps and shows the desired set temperature (which was higher than 318). Just wondering if anyone else has noticed this with theirs. Thanks
The switch is stuck at rain shower after 6 months. They sent a replacement and after another 8 months, it's stuck again. I drilled a hole for the bathroom remodel now I'm hard pressed to find another shower system because it will leave a hole in the tile.
really? I had the similar generic shower system like this brand American Standard, and yes it stuck at rain shower now. I just purchased this American standard to replace the stuck push water-diversion button...something is being stuck inside so the push button doesn't divert the water to the handset. I thought American standard works better but stuck problem's happened to American standard one? Gezzzz!!
@@jakepthsd I gave up on it and bought a grohe that has a lever that switches but I also seen review about that being broken. Now I have 2 little holes in my newly remodeled tiles and I'll see how long the grohe will last.
Is it still a win for you? Lol You probably know this by now (4 years later) that this is the biggest piece of $hit product samsung ever made. Trays on doors keep breaking (already replaced 4 and the ones i have are cracked and taped together) Mechanism that flaps open the seal between the two top doors broke Bottom left freezer doesn't freeze Refrigerator leaks water on the floor And samsung will not take ownership of their defects. From exploding Galaxy note 7's, to exploding washing machines, to defective (most expensive line of) refrigerators. Bye bye samsung!
Thank you for uploading the video. I could not figure out how to fold Rubbermaid 3 step ladder I'd purchased recently. Then I found this video. It was really helpful. Thank you!
The grates come right off and you can clean it with your cleaner of choice. I wipe mine down with a dry towel to catch dry crumbs/pieces then use a regular cleaner.
Just bought this bad boy! went to best buy to spend 2500 on a new fridge and another 300 on a microwave...ended up leaving with an entire new kitchen for $2900 lol Just a heads up for anyone that might be in our situation and lucky enough to see this before the July 4th sale is over>> <<<Lg has a bundle deal going on right now, Best Buy also has a bundle deal going on too the more appliances you buy the more you save, but they dont mention to you that LG on their webiste has a few awesome packages for super cheap, and of course they price match LGs site! We got a better fridge than we were planning on buying too, this stove, the LG 2.0 cu ft above range microwave with sensor cooking, and a really nice LG dishwasher as well! Comes out to just over $4,000 on best buys website with their appliance bundle deal they have goin on if you manually add all the items to your cart, but LG has the same exact items bundled together for $2,901
Thanks for the quick review. Is the TOP shower head angle fixed or adjustable? Can you swivel it to face down to a lesser angle or is it in a fixed position pointing out? Does it have normal threads if you want to replace the TOP head with something different?
How do I set a bake time? I can't figure it. I want the oven to bake for 54 minutes and turn it off itself. I know I can use a timer but it will not turn off the oven. If they don't have that then it is just stupid.
Yes you can leave a 12 "DWS779 or DWS780 with on the stand in a vertical position, but first before mounting these Heavy Saws, I advise you to use a wrench and screwdriver on the back of the brackets to adjust the clamping tension. turning a screw. I had to give the screw a turn and a half so that my DWS779 did not slip when I put the stand in a vertical position, believe me I was scared when the saw slid down and I thought about returning the stand to the store but after this adjustment to the brackets, I no longer have any problem, This miter saw stand is Awesome and I'm very happy with it
I bought all samsung in my house, the fridge is dead after 4 years, after 1 years of normal use the icemaker jam and not work and samsung know it and never fix it. the stove is cheap made, after 4 years the light that show if still heat always stay on, the control are defective and not precise, the door don't close properly, the dishwasher is ok, the washing machine as been replace because could explode. I will never buy samsung again. People bought this brand because it have nice look. but trust me avoid it at all cost.
Which model do you have & how do you like it? Our 23yo Kenmore dishwasher quit a couple wks ago so we had to replace ours. Ordered it today. If all goes well (fingers crossed), it should be available for pick up this Saturday. We ordered the Maytag MDB8959SKZ. I'm finding a few reviews on the 8959 but none so far on the 8959S *K* Z model. How is yours working out?
Sammi-Jo Reviews I have Model# MDB4949SHZ. I installed mine myself on 4/25/2020 and it’s been working good. Much better than my old Frigidaire dishwasher that was only 5 years old and still worked good. This one cleans everything right the first time. I did have a slight issue though with the tub always being wet when finished but I just adjusted the rinse aid to dispense a little more and that fixed the issue. I love my Maytag dishwasher.
Mine smoked quite a bit. I ended up running a self cleaning cycle, not steam cleaning. I had read that on Facebook. The manual and delivery person said run it at 350° for 1 hour then broil for 5 minutes. That didn't do it. Definitely run a self cleaning cycle first thing. Remove the racks just like always.
