KEITH Mfg. Co. encompasses five international locations, a global network of dealers and over 250 worldwide patents. Both mobile and stationary units are used throughout the world in the refuse & recycling, agriculture, ice, cotton, wood products and paper industries.
Assuming the semi and terminal ramp was leveled and the terminal had room behind the gate. Would this system be strong enough to self unload a full load of pallets (EUR 120x80)? Or lets say you can only unload with forklift at the back (I assume these have side door system, but looking past that). Does the system have an easy "stop and go". Could you without too mush hassle have the system push pallets to the back, wave after wave without making it so it just pushed the pallets off the semi?
Yes, the WALKING FLOOR system is strong enough to self unload a full trailer of pallets. The ideal use of the WALKING FLOOR technology is with bulk materials. While it does provide flexibility in what customers can haul by allowing them to backhaul pallets and/or bales, we would not recommend a WALKING FLOOR system for a trailer exclusively handling pallets. For that purpose, we would recommend our Freight Runner system: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2Phec-vuYFc.html or Pallet Walker system ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qyhKrdsC7uM.html. Please let us know if you have additional questions that we may answer for you.
Thank you for your question. KEITH systems are designed to self-relieve the pressure as long as the pump is off and there is nothing blocking the path to the return tank. If the system is off and it is pressurized, (which our service department says would be unlikely and has never seen before), you could crack a fitting to relieve the pressure. Should this happen, we strongly recommend that you contact our service department to determine the cause.
Hi, @samzombi79hd49. I think we have addressed this in previous comments but will explain. WALKING FLOOR unloaders are specifically designed for bulk loads and that is what they do best. Our customers do have the need for unloading palletized materials occasionally. Therefore, a WALKING FLOOR trailer provides more versatility for an operator who hauls a variety of load types, from bulk to bales to pallets. It also provides haulers more of an opportunity for backhauls. For example, you can drop off a load of mulch and bring back a load of palletized fertilizer or hay bales. If you are unloading pallets 100% of the time, check out KEITH's Freight Runner system: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YQSiQPtDz64.html
Howe come they are sowe slow to unload mabe you should take a look on other systems like thoose trailers that have a plate in the front that pushes the load out that is What we use at My work here in gothenburg sweden i drive for stena recycling
Hi, Kim. Thanks for the question. WALKING FLOOR trailers will unload faster, it depends on the oil flow. This municipality chooses to unload at a slower rate. As for comparing a WALKING FLOOR trailer to an ejector trailer, you are losing quite a bit of payload with the plate. Therefore, the trailer cannot haul as much, meaning higher fuel and operating costs to unload the same tonnage of waste. Chances are, if the trailer has any mechanical issues, you will need to unload it to do maintenance. Mechanical components of a WALKING FLOOR trailer are located underneath for easy access.
The CleenSweep tarps are surprisingly durable and you can use other heavier materials with the correct winch style, like what is shown in this KEITH video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uNaqv_WPgRE.html&t=
In general, a WALKING FLOOR trailer will have a higher capacity than a standard dump trailer. Examples where it would be more advantageous to use a WALKING FLOOR trailer include in areas with trees and/or overhead utilities--there is no risk of hitting them because the trailer is unloaded horizontally with no tipping required. Trailers can unload indoors with low overhead conditions. You can also unload on uneven ground and next to other equipment without the risk of tip-overs.
While WALKING FLOOR unloaders are specifically designed for bulk loads, our customers do have the need for unloading palletized materials occasionally. Therefore, a WALKING FLOOR trailer provides more versatility for an operator who hauls a variety of load types, from bulk to bales to pallets.
Thank you for the question Matt. Yes, it will empty the entire trailer. The floor slats of the WALKING FLOOR system run the entire length of the trailer. This video of the floor with our CleenSweep system shows an overhead view of the inside of the trailer that may better explain: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VzQjzdT73p4.html
It does. Here is where you can learn more on our website: www.keithwalkingfloor.com/storage-conveying-bins/ Also, you can chat, on the site, or call with our sales team to get more precise information.
Thanks for viewing our video. Each bin is custom engineered and can be designed in various configurations to pretty much contain and discharge the ice volume produced by the ice making equipment.
Hi, Oliver. Thanks for taking the time to review our video. Most KEITH WALKING FLOOR® systems operate in both an unloading and loading action, which is determined by the control valve on the drive unit. This system is moving in the loading position during this particular demonstration.
Hi, Bradley. KEITH WALKING FLOOR systems operate using a hydraulic drive unit located underneath the trailer. Check out our video "Superior By Design" for a complete run through of how the system works. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mX0KN-4-iu4.html
Thanks for viewing our video, Soul Brother. KEITH WALKING FLOOR systems actually unload relatively quickly. If set up properly, a WALKING FLOOR system is capable of easily unloading bulk material in a standard 45’ trailer in less than ten minutes. One of the main reasons that so many companies own trailers equipped with KEITH WALKING FLOOR unloaders is the diversity of the trailers-the ability to haul a variety of products, increasing profitability. The WALKING FLOOR system is capable of transporting both bulk material and palletized material. This cannot be done with most standard curtain side trailers.
Ash does work/unload off a WALKING FLOOR trailer if operated properly and with the proper/sufficient hydraulic pressure to move load. Ash is hard on standard aluminum flooring due to it abrasiveness, but it will typically unload without issues.
I have a 53' 8 axle I usually haul tree bark in but we have also used it to haul bailed hay, silage, potting soil, saw dust, scrap tires and wood chips. It's is a brilliant system!
Absolutely awesome video showing what goes into 1 of these things. I was actually half expecting that it may have been some sort of cam driven thing. Very nice.
I have a Keith walking floor system in my trailer. The safety decals and operation stickers are worn out to the point where they are unreadable. Can I get these stickers at no cost? Is that the way that I understand the video?
Hi, Ben. Thanks for contacting us. Please call us at 800-547-6161 and ask for our parts sales department. They can set you up with the safety decals you need.
Thanks for visiting our RU-vid channel, Apurva. When operating the WALKING FLOOR® system in freezing conditions, we recommend the following: Stop all three cylinders at the beginning of the unloading cycle. As soon as the unloading starts, the floor slats will move together to the discharge end of the trailer, freeing the load from the side walls. In very cold climates, KEITH also recommends using 3.5” bore cylinders, as opposed to 3.0”.
Thank for the comment. KEITH actually makes the unloading system in the trailers and is not affiliated directly with contracting waste haulers for municipalities. Our advice would be to contact the municipal solid waste agency in your area to find out more about how they are hauling MSW. Best of luck!
