Brick Paver DIY repairs for homeowners. We are brick paver hardscape specialists in the Metro Detroit Area. The Brick Paver Dr. Is a privately owned company specializing in brick paver installations, wall, walkway and step repair, maintenance and restoration. At The Brick Paver Dr. we are very customer-focused. As a result, most of our work comes from referrals. We service the entire Metro Detroit area. Please contact us at 1-866-80-PAVER or visit our website www.thebrickpaverdoctor.com. We look forward to hearing from you and discussing your project. The Brick Paver Dr.
Thank you, I would suggest running a padded plate compactor to get the polymeric sand down further in the joints for more stability since heavier weights will be on the pavers. Then blow off the pavers and start the misting (activation) process. Brick types and paver base specifications are based on vehicle or non vehicle applications. Thank you!
How soon after the misting the polymeric sand can I apply the sealer? It's been dry with no rain overnight, and I'd like to do it this afternoon, 24 hours afterward. Thx
Great job, I have a brick that is chipped on my driveway, how do I remove it without damaging the other bricks, would the new brick have to be set in any cement ??
Thank you so much for your step-by-step video. I just finished mine. Worked great. No more leaves getting trapped between the pavers. THANK YOU!!! 67 in Texas woman.
Great video I appreciate the excellent tips. I live in the Midwest and was wondering if you recommend a sealer after the maintenance of filling and brushing all the sand into the joints. If so is there any product you’d recommend?
Bruh didn’t even blow the sand off the pavers. Remove more of that base so it can prevent weeds from growing easily. Just tear a nice section so you can use a level. Where did you reroute the drain?
This was a huge help for me. I did not realize this was a simple to do as it was. A contractor wanted to charge me $300 to do a 6 x 6 sand spreading. It cost me $20 for the sand and I only used less than half of it.
thanks for helpful info. I have a 20 yr old paver patio still in good condition...except the border bricks are starting to show cracks/hairline cracks, due to age, weather and foot traffic. Hoping to maintain them as we cannot replace. But edges may start to crumble. Would an epoxy sealant on the edging help? It is about 25 linear feet and edge edging stone is about 12" long.
Yes it’s essential. The most important step is to blow the excess sand and dust off the top of the bricks. Be careful to not blow the sand out of the joints. Then mist (not high pressure) the joints which is what starts the activation of the sand binder. This is what makes the sand stay in the joints. This process should be done three times. When the joints are misted there should only be enough enough water to be absorbed by the joint. Try not to create puddling or spray excessive water. Good luck with everything. Write back if you have any questions.
@@vincegriffiths3550 Thanks Vince, that was exactly the info I was looking for. In place of the misting process.... is there where people use the sealer? or should that be done ASWELL as misting?
We just set our perma sand today. We noticed that we have a few flawed areas that can use some more sand. It has hardened by now. Not yet 24 hours. Can I reapply more perma sand and water it again? Or are we stuck with the imperfections?
Most polymeric sand manufacturers have notes on the bag that says “helps with insects and plants”. But there are no guarantees. I do know the more you let things go not maintained the more chance there is for things to grow. All I can say is pavers come with some maintenance.
Well I wish I had seen this about 10 years ago before the pavers around my pool began settling. One of those things you wish the previous home owner explained to you when you bought the house.
A tamper (with a pad) is only used to smooth out wavy or uneven bricks during maintenance. Sometimes a tamper can be used at the new install phase to help settle sand into the joints, mainly for tight joints.
I hate brick pavers. Weeds and grass grow right through the joints, the sand makes a mess, and the whole thing is just very high-maintenance. Asphalt or concrete may not be as attractive, but they are far easier to live with.
There’s pros and cons to each. I don’t bash concrete but if it cracks it’s a done deal. Yes, pavers do need maintenance once every 3 years or so but, of course it’s subjective. I run into customers that let their pavers go 10 years and wonder why there’s grass growing in the joints. A good polymeric sand doesn’t have to make a mess and will harden up and protect the joints from grass growing. How often do you perform maintenance on your pavers ?
@@vincegriffiths3550 I agree about concrete. My pavers were done 15 years ago, and now I realize the job was not done very well. I do what I can from time to time, but it's very hard work for me. Thinking of putting in asphalt. Not as pretty and fancy, but far less maintenance.
Hello, difficult question, the amount of sand depends on the brick type, pattern, and the number of repairs (if any). These are all factors influencing the joint size where the sand goes.Repairs increase the sand usage since the joints are opened or cleaned out entirely. I’m guessing you have no repairs. The manufacturer of the sand has a usage per square foot referenced on the sand bag, it’s pretty broad. Even with +15 years of experience Me and my employees can be a few bags off on a large area. If I saw a picture I would have a better chance of estimating to within a bag or so. Thank you!
@@vincegriffiths3550 Thank you for such a full reply, I appreciate it. Mine is a fair;y new ( 3 years ) with area of 85 m2 which I think is about 100 yd2. There are no repairs and the joints are still tight. I can't put a picture on here, sadly. Peter on the Scotland/ England border