Nine Car Garage is a channel where you can learn how to do many things on your own. We are a husband and wife team who are independent thinkers who always try to fix or build things on our own!
Stay tuned for videos on how we built a 3 car garage, finished the interior of our home, review tools, complete auto repairs and more!
I'm glad. Since I made this video some 20yrs ago it's gotten stuck again, fixed and stuck again. I almost want to put a camera on the gearbox to see why it keeps getting stuck. Any ideas???
Oh noooo! My manual says to call 1-800-444-3353. Looks like it might be part of the upper handle housing part 61 , but maybe if it's just a little button you can get your friendly neighbor maker to 3d print you a new one?
For that lil waterfall of coolant on the rear section, loosen the bolts but don't remove them... When things are loose, give it a wiggle and the coolant will slowly flow vs tsunami flow out
Drive your Mazda's into the ground and get what dollars you can from the junk yard then go buy yourself an American built performance vehicle, Mazdas give good headache ,,,,,,
i dont know about other models or years but THE 2010 MAZDA 6 HAS A FACTORY RECALL ON ITS SUB FRAME AND ALL SUB FRAME PARTS AND LABOR TO REPLACE IT BY A MAZDA DEALER IS INCLUDED, FREE ! JUST LETTING YOU OWNERS KNOW BECAUSE MAZDA DEALERS OR MAZDA CORPORATION WONT .
I’ve used this about 2 times but a friend borrowed it and now blade mechanism appears to be turned backwards. Can’t get the scrolling knob to turn the right way out. How do I do it?
As far as Iknow, the scrolling selector on the side is the only thing that lets/stops it from rotating. If you put it in scroll mode, you should just be able to turn it back straight. Otherwise you may need to go in like I did!
This gun double shoots a lot, not as in it will shoot one mail and then shoot another shortly after, but it will shoot two nails at the same time somehow.
Interesting. I haven't seen that. I use Bostitch collated nails and it seems to work fine. Maybe if you try 21 degree there will be less apparent overlap, otherwise you may want to see if your hammer has a defect in the machining
Thank you for the only video I could find that showed the difference between the old and new version and how to remove that o-ring. I was picking and twisting that knob to all frustration!
There are so many companies that sell thumb kits....Some are obviously more stout than others......WHAT BRAND IS IT???? AWESOME VIDEO!!!! I want to put a Thumb on my hoe. Thanks Man!!!
Great video, I’m still trying to my 2.5 rod by 3.5 cylinder dipper piston nut off. I got the seal kits for entire boom, just trying not beat up my chrome or fingers! Don’t forget the hoses!!
Just very gery important FYI to everyone, mazda has called a recall recently on the front subframe crossmember. They should replace it free or if somebody had it replaced you can still should get reimburstment. Please contact mazda
I wouldn't leave the insulation paper facing exposed anywhere. It's highly flammable and is supposed to be covered with something. One mishap and you'll burn the whole thing down real quick.
Yeah, my wife has a 2012 Mazda 2, I got underneath it recently for an oil change and was horrified at the state of the subframe. Wirebrushed and undersealed it but I reckon it might be too little too late.
Great question! There is a range but since this is a framing nailer it isn't really made for smaller nails. The specs say .113 to .131" diameter, 2" to 3-1/2" long.
Man, I was scouring RU-vid and the internet for a long time to see how this could work or if anyone has done it! Thank you for sharing. Hoping to do this in a 800 sqft ADU I will be building and want it vaulted in the family/kitchen, then storage over the 3 bedroom/bath/hall on the back half of house.
Thanks! I just needed to know how to change the angle, since I’ve had 21deg nails in it for over 10 years and just bought 28deg nails on an incorrect guess. Yes, over 10 years of around the house projects, building a couple of rooms worth of framed walls etc., probably 2000 nails driven. I oil it with every use and it has never let me down.
I need a new cylinder seal for this nailer, where can I buy a replacement? and does anyone have a part # I can search? link for part replacement will be appreciated, thanks
Hello, we have the same problem only that he stayed first and doesn't let anyone else change, could you help us solve that problem? Thank you and excellent video
It could be the same issues where two internal forks are locked together. My only advice is to unbolt the top plate on the shift mechanism and try to pull up. It it doesn't come up, use a long screwdriver to move forks manually through the crack to get forks clear of housing. Good luck!
Ive got an eton viper 50cc engine and i think itd 2 stroke do you know where i can get a new wiring loom ans carb from for this? I dont know where the elec shock wire plugs into
I use get2itparts.com. the electrical schematic was a little harder to come by, the ones I found didn't match the machine directly but did help out. I might be able to find these documents if you have no luck.
Nothing special for the 580k. Sorry I don't know the differences between the d and k in this area. I was worried a little about the grease on the inside of the extendahoe but got over it. I ground down the paint and imperfections somewhat, then just blasted on a few long welds. So far so good!
My JCB 214 was stuck in reverse , The forward clutch plates had overheated and warped so bad it was keeping it in reverse ; The trans . was rebuilt ; With affordable parts from Joseph industries in Ohio .
