I've collected a lot of hobbies throughout the years. I like learning about new ones, and I love sharing all of them with my friends. I'm far from perfect at any of them, but that's not where the fun comes from. My newest hobby is editing videos for RU-vid. I'm hoping that we can share our hobbies with each other and have fun together. Subscribe to my channel to follow along with the randomness of my next videos!!! :D
This is a really cool trivet design; functional, simple, yet elegant in its simplicity. (Agreed, Danish Oil looks really good, brings out the beauty of the wood.) I appreciate your attention to safety, and your workarounds for assuring that.
If you have run any softwood thru the planer you may get some pitch resudue on your rollers. I have used acetone or varsol from time to time to clean them up. Nice color combinations
Thanks for the tip! I definitely run softwood through occasionally. I just Googled varsol. It sounds like it's the same or very similar to mineral spirits, which I have a lot of. Maybe I'll try that next time it needs to be cleaned. Thanks. :)
If I had a wonderful big shop like you have it would be so nice to be able to walk to the next machine and make a few quick adjustments and cut away. Why do you have to “clean off” each machine when you need to use it?
Oh, that's an easy one! Sometimes it's because I'm in the middle of two or three projects. Other times I just haven't found a location for the item I keep moving around. I try to be organized, but it doesn't always work out. I started several years ago, working out of my tiny vinyl shed. I had to pull out the couple of tools I had at the time and work under a pop up tent in the back yard. Then I moved into a small extra room in my house. That was great, but I had to be much more careful about ruining the workspace (floors, walls, etc...). My last move was from there to my hobby shop where I have materials and tools from all of my hobbies taking up a lot of space. I also have stuff in there for the back yard, and storage for things we only use occasionally. One thing I've noticed is, it doesn't seem to matter how big my shop is, I manage to grow into it and I'd always like more room. :)
That's the funny thing! She showed me a picture of one afterwards, and it was a simple square board with some routed paths to allow for heat dissipation. I've made those a few times since too. Neither of us can figure out how I heard 'jute cord' and 'woven together' when she was explaining it to me. I'm convinced that her memory is just worse than mine. Lol!! I live about 500 miles away from her, so we don't talk every day. She had mentioned them and explained them, and I thought I had a good idea of what they looked like. A few months later I thought I'd make some and send them home as a surprise, so I didn't really have much more conversation about how to make them with her.
You're not oiling enough to give deep penetration & protection. Boiled linseed oil would have been better in a tub and soak batches until they stopp absorbing oil. Leave an hour, then wipe off any excess. Leave few days to polymerise. Guaranteed to not stick or be washed off. Occasionally wipe over with more BLO to top up protection. Also countersink drill hole edges. Less likely to wear through twine
Oh, I really like the countersunk holes idea. I might use that if I do them again!! Completely saturating them would definitely make the indestructible. But we've had our sets for years and haven't had any issues at all. Maybe I'll try it out with the next batch. :)
Good call. I actually may have mentioned it, but I have to cut hours from these videos just so I can get them down to a palatable size. I'm still playing with long and short formats, and other elements. Let me know what you think works and doesn't.
Nice work. If I may offer a suggestion- tighten up your editing you don’t need to show quite as much detail, this will help with your run time and should help boost views and subscriptions. Good luck and happy new year!
I'm a new woodworker and find your explanations really easy to follow. You're a great teacher. Looking forward to seeing more of your videos.Happy new year from England mate. By the way what's your name?
I bought a Rikon 70 - 220 VSR Midi lathe a couple of years ago. I was going to get a cheaper one, but this one happened to go on sale around the same time and it was a LOT nicer. :D
Absolutely! And if you don't have the same tools, there's plenty of other ways to get the same results. I saw one comment suggest using a Lenox hole saw with the drill bit removed to make the circles. :)
Greetings from Australia. What a great design and well done. You make some really interesting pieces and I love the contrasting timbers. Have subscribed and will watch more of your work. Regards One Handed Maker
Yup. Someone else mentioned that too. That would have saved a LOT of time. I think I was hoping I'd only have to clean a few of them up on the sander. It turned out to be all of them... :P
Clean the bed of the planner then try spraying some silicone spray on the bed of your planner. After using it for a while the bed gets sticky. Great designs
Thank you. :D. I did clean my rollers today and now it works perfectly. I was going to reapply the paste wax, but it was already super smooth. It seems like it was just the pitch buildup on the rollers.
It came with my Router lift. I think it's a Jess'em lift? I bought it several years ago. I could go see if the model is listed on the lift if you're interested. :)
I buy those from Woodcraft. They have monthly sales on different species of wood. Often 40-60% off their normal prices. So I buy one or two when I visit and just sort of hoard them until I think of a way to use them. :)
I know with the Dewalt planer that I have, when it is really cold in my garage, some of the rollers will get stuck. I usually put a heater next to it for several minutes and that seems to work.
The rollers seem to be moving. They actually leave black marks. I think maybe it needs cleaned and waxed. Also, I may have the indeed and out feed tables at too high of an angle. I'll have to check it all out.
@@hobbyhicks7370 This happens with my Dewalt 735 as well. The issue is in the colder weather, the rubber on the rollre gets harder, in turn it loses its grippiness and tends to skid across the wood, burning it in the process. Warming up the rollers definitely helps
Very nice work and some great finishing tips-Thank you for taking the time to make the video. I cut out the coasters using a 4" Lenox hole saw in a drill press. Secure the work piece to the drill press table with a clamp and of course take the center drill bit out of the hole saw. Clean up the edges with the chamfer bit on your router as shown.
Oh, that's a cool idea. I have a kit of Lenox hole saws, but I think the biggest is only around 3-3.5 inches. That might be a quicker way to batch them out than the bandsaw jig though. Thanks for the tip. :)
Nice job! I enjoyed that you shared your thought process as you went. It was very similar to the way I do my projects. You did really well with safety, but I do have one suggestion... Use a sacrificial fence with your Incra miter gauge. That way you can support the cut off pieces and push them past the blade. A cross-cut sled would work wonders for that too. Keep on making!
Nice job on the coasters. I will point out though that your bandsaw blade is way overexposed when you go to using the circle cutting jig. Please lower the guard down closer to the cutting surface. Happy (safe!!) Holidays!
Looks great. I've got some Woodcraft pizza cutters and bottle openers to do. Just got all the needed pieces for my lathe and soon as I get back from our Christmas trip ill give them a try.
Thanks! I've done a lot of kit pens, and a letter opener, but those were a lot different. I think I prefer turning wood rather than acrylic. But my friends really like the designs you get with acrylic. :)
Definitely. I was worried that my coasters would be too thin if I used the table saw. But I ended up sanding a decent amount off just to clean up the bandsaw marks.
Nice job! I found your video while looking for lathe projects and really enjoy how you walked through your process. I’m viewing many lathe videos as I’m trying to decide if I want to buy a lathe in the new year and learn something new. Take care.
Glad you stopped by and watched one of my videos! :D. I'm still relatively new to the lathe. I remember trying to decide which to buy and I ended up getting mine when I was in the store and noticed it was on a pretty good discount. :D
Good eye. I had meant to. But when I realized my mistake, I figured I'd just push ahead. I have a lot of bandsaw boxes that are cut the whole way through like this one, so at least it's not uncommon to do it this way. ;)
Yah. The spindle sander helps a lot. But there's still a lot of hand sanding that usually needs done. I usually listen to podcasts or RU-vid videos, get a drink handy, and get in a sanding groove. :)
You should try one where the middle piece is long enough to fold the 2 outside town in making almost a rectangle shape allowing it to be 2 different sizes. Cool idea!!
The rubber rollers that feed the wood get coated with sawdust pressed into the surface. Try cleaning the rollers and see if that solves your planer feed problem.
That's a super good idea. I think there may be more wrong than that, but it's a good place to start. :). You think paste wax would work? That's what I use on my table saw.
@@hobbyhicks7370 I think so, I use the same thing for my planer, jointer, table saw. The rollers might need cleaned too. Not sure what to use there. I have a Dewalt planer and have had this same problem and waxing the deck solved it. You have to keep it clean and smooth. Great video btw, you gave me some good ideas! Thx!
Awesome! I'm glad it helped! I thought maybe it was a bit long for a single project, so I've been fitting the latest ones into a single video. I'm trying not to leave anything out and keep the content informative. :). I'm still playing with what works best for videos.
Cool to see the process entirely, wouldn’t the alcohol only be an issue if they spill on the coaster? Genuine question as I only oiled those I’m giving as gifts this year.
Yah. It wouldn't do anything if it didn't touch the finish. I could definitely see some small spillage if you're pouring it while it's on the coaster, or if some dribbles over the edge while you're drinking. I'm sure it would have been fine, but I figured I'd take a different route just in case. It gave me a problem to solve at least. :)
Fascinating to see the process from start to finish, thank you for sharing your work… 👍🏻 By the by, I came here from your post in Steve’s Weekend Woodworker Group on BookFarce (James Rodgers!)… 😉
Thank you! Glad to see that posting in RU-vid groups is helping people see my videos. :). I love your little camper that's in your UToob icon. Did you make that? :D. I like the little seagull. :)
@@hobbyhicks7370 I would love to say I did make it, but the little camper was a birthday gift from my lovely wife just after we bought our caravan (now sold!)… 👀 One day perhaps, although I fear our RVing days are over now… 🐸
A no-no (I'm guilty of as well) and this probably has to do with your commentary - no dust mask. Dust collection doesn't catch everything. I think a crosscut sled would make for faster (and safer) repeatable cuts for the trivet length (especially for those that don't have an Incra miter gauge).
Correct. Sometimes it just comes down to forgetfulness, which clearly isn't a good excuse. When I wear one of my dust masks, it always creates fog in my prescription glasses. At that point, it comes down to risk assessment. When I'm working with very fine particulate, like on the spindle sander, I wear a mask. When I'm making a few cuts on my table saw, or the bandsaw, I base it on what I'm cutting (some woods are toxic, others not so much but can still cause respiratory issues). Maybe I'll revisit this and see if there's a better way. Thanks for bringing it up! :)