Thanks nice video. I just put a piston ring in ours and ended up not taking the rod out however I found that the piston had been rubbing on one side of the cylinder and left some aluminum on the cylinder. No big deal though I just used some fine grit paper to take it off. I picked up a ring that measured the same as the stock ring on Amazon. 62.5mm x 49mm x 1mm. Then I heated the ring up to make it more flexible and put on the piston while it was at top dead center and slowly tightened the ring retainer holding the ring as close to the center as possible. When I got it almost tight I took a flat piece of wood and pressed on top of the ring while holding the crank still. This helped align the ring in there and then tightened it up. Worked good.
I think I had to remove it due to copyright claim. If you want a copy of it, contact me via my about tab for the channel and I'll either send you the video a link to it at least.
I can't figure out how to put this stupid SIM card in the right way it's so tiny and this phone is so cheap it really doesn't line up in the slot like a smartphone I'm not sure where the cornered Edge goes help
@@LazloNQ I fixed mine it wouldn’t go in reverse and I figured it out I’ll do a video and tag the video. That’s why I watched this video and I think that’s why most did the same. Thanks again
thank you very much, I work there in my roadstar changing the big, steering wheel for a smaller sport steering wheel. The was a cable by the the Boss Kit for connect it, ( also place for put the ESP back )instead of the airbag and I used the cable conector of the Smart. I could not believe but it worked very well. Had a great time watching the "24 Le Mans" and take my time working on the SMart!
Second Question: How do I pair my phone to my computer? I want to use Google Messages for web and be able to type and send messages without my fingers touching the wrong place and losing what I just typed. I get all the way to use the QR code but can't pair the two devices. Thanx
Question: I set a lock on my Orbic flip phone and it asks me to unlock it every few minutes when it goes to sleep. Where can I set the time limit for keeping the phone unlocked. My kids decided I needed a flip phone because they were worried when they couldn't call or reach me on my smart phone and it would go to voice mail. I am adjusting and waiting for them to call or reach me anytime. LOL So goes the story of a mother's contact with kids who lead busy lives. Thank you for taking the time to help us senior citizens to be techno.
I walk around and all I see is people heads down glued to their phone young and old. Just thinking that used to be me I laugh. And now I feel like I REALLY SEE THE WORLD like the good old days.
@@LazloNQ I do like to watch old school training videos of all kinds from time to time on youtube, and the new ones from USCSB, and while watching the show, Chris used this footage for a sketch bit, and that ridiculous explosion made have to look this one up lol, and i think this is the easiest full version to find in a sea of random forklift safety videos. idk also just felt to comment on it since a very short lived 90s niche sketch show of all things got a Dane to see the true color of danger! Good day to you mate, stay safe from driving in harbors or sudden explosions.
Thank you and you are FTC! I normally don't edit video on the level I had to do with this one and I learned a lot. Thanks for putting up with my horrific editing, but since there is a distinct lack of repair videos for this saw and its parts on youtube, maybe this will help someone repair theirs...or perhaps choose not to. LOL! Have a good day!
Thank you, Lazlo, for posting this review. I got a flip phone for my brother. He isn't online, wanted nothing to do with technology but I finally got him to get a phone since there are virtually no pay phones around any longer. And his daughter and I want to be able to reach him and he needs a phone for himself and safety. I've only had smart phones so this flip phone was new to me and I needed help. Since he only wants to call out and receive calls, this is perfect for him. You didn't go over setting up voice mail, but I think I can do that. Thanks again.
In the video notes is a link to the manual and that can assist you in setting up voice mail. I think with verizon you dial *86 to get access to voice mail.
I would suggest you join the TBLE server on discord as well as check out KF Plus engine tutorial videos. If you build from a tutorial, you begin to understand engine function. How this engine works is a valve opens to let air in and push the piston down. Notice the other valve is shut during this time. Then when the piston is at the bottom, the valves change so that the air can exhaust from the cylinder and the incoming air is blocked. This allows the stored energy in the flywheel to bring the piston back up to the top and the cycle repeats. Thanks for your comment!
Glad you enjoyed it! I hadn't listened to this in a while so it's nice when I get a comment and a reminder over the songs I've recorded. Thanks for your comment.
Click the 2nd link in the video notes. The last entry in that list at that link tells you how to check voicemail. From there the prompts will guide you as to how to delete your old messages.
Unfortunately you have to try calling harbor freight early in the morning before their call center gets swamped and ask them if they have the part, if not, then you're out and have to go rogue. Look on facebook marketplace for used compressors and possibly try aliexpress.com or ebay - this is the way it is with chinese goods.
Here is the operating manual in pdf form. Read it to teach yourself how to use the phone: ss7.vzw.com/is/content/VerizonWireless/Catalog%20Assets/Devices/orbic/orbic-journey/orbic-journey-rc2200l-ug.pdf
The routing of the fuel line goes from the tank to the filter to the pump and then to the carburetor. The filter is located ahead of the pump and underneath the coolant fill reservoir. If you can doctor up this URL and make it work, you'll see some nice pictures: advriderDOTcomSLASHfSLASHthreadsSLASHre-flex-incarnation-honda-reflex-250-rebuild.1088158SLASH
Great video! to test the horn circuit, if i press the horn i should get a closed circuit between pins 3 and 4, right? in the back of the clockspring plug. thks
Hello, my Smart car would not shift out of park. I was able to access the yellow release button to finally shift the car and drive it with no problems. I bought a new shift assembly and installed it but will not shift out of park either. The yellow button does not help. Is the unit defective as I cannot get the shifter to move at all?
I have not scanned for fault codes but the only problem was the original shifter suddenly coming out of park until I used the yellow lever. The car drove fine otherwise. The yellow lever on the new unit won’t even do this.
OMG Thank you for how to simply BLOW hard into the gas tank to increase the pressure and get the gas pumping through to the spark plug, etc. It worked. I have a 2001 Honda Reflex, 33,000 miles, that has sat for maybe three years. New spark plug, battery, pumped out the old gas, added new gas, but no gas got to the spark plug UNTIL I blew pressure into the gas tank. IT WORKED!!!
Ah, well, time will tell, but I'm planning on selling it this month. I'm getting too old to ride safely. Of course, now that it's running again, it is sellable.
