YOU ARE A LIFE SAVOR!!!! I disconnected the battery and everything reset so a single press of the lock was locking it but making it honk and unlocking it by pressing it once made it honk twice. Now this fixed it and works correctly! 1 lock on remote with key locks the car and two quick presses locks and chirps. 1 unlock unlocks the driver door and two quick unlock presses unlocks all doors with no chirp!!
I have 2 key fobs for my ford edge (like the duplicate pair you have in the video), both stopped working remotely to lock/unlock my car. I changed the batteries, tried this reprogramming method, and nothing works. I’m not sure what else to do 😢
Thank you very much. I stumbled across your video. I actually had a system start failure on my 2015 f250. I was getting very bummed out. However, my fobs were not working. I did the "8times" trick and that did it. Thanks gor the tip.
2015 explorer w the 5 button key fob style key. Super awesome. This was massively helpful. I programed 3 keys and 2 key fobs just like the one he does in the video. It worked flawlessly. Thanks Bro
Bro thank you so much, this worked easily for my 2014 Ford Explorer. At first it didn’t want to work so what I did was get out the car, lock car with the number pad, unlock the car and try it again with the door open and worked how it should. To program two keys you just need to press the buttons for each fob before you turn the ignition off.
Old video but it works,i just had a mobile lock smith come out to my house to cut and program a key with the built in fob for a 2010 f150 he got the key cut and programed to start truck but could not get fob to program i called him maybe 15 minutes after he left and told him i got it to work Thanks.....
My 2011 needed a 2nd step: It takes 2 existing working keys. And your NEW key must be cut first at a hardware store or by a locksmith. Step 1) Put the first original key into the ignition lock and turn it to "on" (not start). The gages will light up. Remove that key. Put the 2nd original key into the ignition lock and turn it to "on" (has to be done within 5 - 20 seconds). Remove that key. Put the NEW key into the ignition lock and turn it to "on" (again 5- 20 seconds). Now the NEW key will star the car. Your video only shows how to pair the new fob to the door locks. The ignition interlock is a separate function.
