Thanks for watching! I'm glad you found the video helpful. Good luck with your repair. I would love to hear how it went.😀

That is interesting. We love the Flatmaster drum sander for our woodworking projects when we want to sand many pieces of wood quickly then do a final finish sanding with our Festool orbital sander. it saves us loads of time and when not in use it works well as a workbench. Do you have any special projects where you would use this sander?

@DustyWorkbench Absolutely. I make small wood jewel boxes! Unfortunately this machine is not available in my country... 😒

Thanks for the tip! I hadn't thought of using a heat gun. I'll definitely give that a try next time.

Thanks for asking! I'm using Canva to create the design then Lightburn to trace for this project. It's been great for creating detailed 3D models. As for Laser GRBL, I haven't tried that software, but it might be possible with the right configuration and plugins. Have you had any experience using Laser GRBL for similar projects?

Awesome! The way I see it is if the tool works at a good price. That's all you need to get started. We did go with a Festool because that is where we spend most of our time. It was well worth the extra for the speed, comfort, and dust collection.

That's great to hear you've had such a positive experience with your Longmill MK1! I've been really impressed with its build quality and performance. I'm glad you've been able to put it to good use with those challenging materials. I'm also considering expanding my setup next year and am torn between the 2.5 and AltMill. I've heard good things about both. Have you done any research on the pros and cons of each? I'd love to hear your thoughts. I need all the details I can get to pass the spouse's approval. :)

Thanks so much! It's great to hear from another local maker. While I won't be participating in any markets this year, you might find some of my work at Ottawa Loves Local stores. Do you have an Instagram or website where I can see more of your work?

Thanks for sharing your experience! It's great to hear from another Longmill owner. I completely agree that time is a major factor when it comes to profitability. I've found that even with multi-tasking, it's difficult to make a significant profit on smaller items. As for speeds, I typically run my rough cuts at around 50 inches /min with deeper plunges and my finish cuts at 120 inches/min. I've found that pushing the machine too hard can lead to premature wear and tear, so I try to strike a balance between speed and longevity. Have you tried experimenting with different materials or techniques to see if you can reduce production time without compromising quality?

That’s awesome! Thank you so much for featuring my Halloween sign on your podcast. I'd love to listen in.

That’s a great idea! I’ve been thinking about making a Canva tutorial for a while now. I’ll definitely try to get one out in October. Stay tuned!

You're absolutely right. I can see how using 6' pipe clamps for 2' of wood might seem excessive. I've been making do with what I have available, but I definitely see the value in using clamps that are more appropriately sized for the job. Thanks for the feedback. I'll keep it in mind for future projects.

That's fantastic! We're so proud of the sign we built for you and can't wait to see it on display at booth 903. We're excited to see what else you have in store

I think you're right. I might have put the lower letter backward and top the upside-down, mirrored when gluing the two layers together lol It still worked, in the end, 🙃 Thanks for watching 😀

Glad to hear it! Thanks

That's a fantastic idea! I hadn't considered using two backboards to create both a positive and negative relief sign. I love the idea of using red resin to simulate blood dripping from the letter cutouts. It would add a really cool and spooky effect. Thank you so much for sharing your creative input. I'll definitely experiment with this technique for my next project.

Thank you so much for your insightful advice as a businessman. I truly appreciate you taking the time to share your expertise. You make a great point about the importance of accurate pricing to ensure profitability. I’ll definitely consider your suggestion of incorporating my target profit margin into the manufacturing costs when calculating my selling price. However, I do want to clarify that the items we’re making are likely to be perceived as premium products due to their unique design and high-quality materials. As such, mass-producing lower-quality items to compete with cheaper alternatives might not be the best strategy for us. I believe that our niche market would be more receptive to handcrafted, high-quality products, even if they come at a higher price point. Of course, this would require careful market research and pricing strategy to ensure that we can still attract customers and generate a profit. Thank you again for your valuable input. I’ll definitely keep your advice in mind.

Absolutely! Automation can be a game-changer for large-scale production. Look at 3D print farms. Thanks for sharing your insights. Have you tried any specific automation techniques for your CNC projects?

I hear you! It's frustrating when cool ideas don't translate into profits. I'm actually thinking of trying a new approach by combining traditional woodworking with CNC accents. For example, I could make a simple wooden box and then use the CNC to add an intricate 3D carving to the lid. This would elevate the piece, increase the price point, and hopefully make it more appealing to a niche market. Have you tried anything similar?

​@@DustyWorkbenchI've thought of doing the same thing as well, but I haven't gotten around to it yet. That will be a 2025 thing in my shop!

Glad it helped

Thanks! Anamorphic art can be a fun and challenging project.

I'm glad you found the Flatmaster Drum Sander to be a great fit for your setup! It's a fantastic tool, especially for those with limited space. I've been really impressed with how well it works and the quality of finish it produces. Let me know if you have any questions or need tips on getting the most out of it.

While I'm not a professional painter, I've had some experience with outdoor surfaces. Acrylic enamel paint is a good option for painting glass. It's designed to adhere well to smooth surfaces and is durable enough to withstand outdoor elements. Before applying the paint, make sure the glass is clean and free of any dirt or grease. Remember to follow the manufacturer's instructions for the best results. If you're unsure about the process, you could consult a local professional paint store for more specific advice.

That’s a great point! I’ve too have seen advice both ways, and while lowering the blade might make it easier to access and manipulate, I do not believe it is strictly necessary for the outcome. I haven’t needed to adjust the belt since the video, so I can’t say for sure if I lowered the blade before tightening it. The manual does mention lowering the blade for belt changes, but it’s possible that this isn’t always required for simple tightening. If you’re still having trouble, it might be worth trying both methods to see what works best for you. Thanks for your feedback Paul

Sorry, the main video has a different-looking thumbnail. Here's the link: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6_uMm5AMALY.html Thanks for stopping by 😀

That's fantastic! Lasering fabric is a lot of fun and I hope it works well with your K40. You're going to love the possibilities. Be sure to share your results when you're done - I'd love to see what you come up with!

@@DustyWorkbench We just moved so I've got to get everything set up again, but I'll be sure to share. :D

Thanks for watching! I appreciate you taking the time to check out the video. It's definitely something to consider when making a decision. I would love to hear which saw you decided to go with. Happy woodworking!

Thanks for the kind words! You're absolutely right about the miter slot. It would definitely add versatility. Many people choose to add one to their outfeed table, even if they don't use a sled often. It's a great option to have. Thanks for the suggestion!

That's a fantastic tip! Gluing the fabric down beforehand definitely makes a lot of sense. I was so focused on the laser engraving aspect that I completely overlooked the potential warping. You've saved me a lot of headaches! Funny you should mention that because I actually had a similar idea: getting a whole yard of denim and gluing it to a massive sheet of plywood like some kind of denim billboard. Then, laser engrave and cut a bunch of coasters or a sign at once. I'm half-tempted to try it for a future video. Stay tuned!

​@@DustyWorkbench You might want to test with dark blue Chambray fabric too, it is similar to Denim but not as thick, so has better edges after cutting. Gotta be cautious with the engraving tho, as it is easier to engrave too deep. I'm using it for handbags.

Hey there! Thanks for watching and for your comment. I totally understand the concern about over-tightening and the potential for warping. Using equal pressure but not too much, multiple clamps and clamping cauls is the key to a good glue-up. By distributing the pressure evenly, you can significantly reduce the risk of damaging your workpiece. Wish there was a simpler way. I'm always open to suggestions and new techniques, so if you have a particular method that works well for you, feel free to share it with the community! Thanks again for watching!

Excellent question 🙂 There is some distortion / alignment on the map. That is to say, when looking at it from an angle, the player piece looks like it is not centered on the square. I asked my son and his friends if it caused any issues, and they said the distortion was not enough to be of concern. So far, they have played 4 games on it, and they are quite pleased. 😀 👍 Thanks for watching.

Hey there! Thanks for the tip! The new gantry for the Longmill CNC definitely looks impressive. It's great to hear such positive feedback about it. I'll definitely keep it in mind when it's time to upgrade. Appreciate the heads up! Paul

Thanks for the feedback! I appreciate you understanding the need for additional clamps to secure the workpiece. I'm actually on the lookout for more efficient clamping methods that require fewer clamps overall. Ideas with a low budget of course ;) If you have any clever workarounds or alternative clamping systems, I'd love to hear about them!

Those are some great ideas. To be honest, I don't do much research when creating most stuff as I don't want to be influenced, but I have seen tables from Wyrmwood Games over past years. I may look at making additions in the future, but I wanted to stay within their budget I was suggesting all kinds of ideas with lighting, speakers, and smoke, but my sons were like, "Just keep it simple, dad. The players already get distracted enough during the game. Don't add more distractions" 😞😓😩

He is using Arkenforge. He says it is working well. They all like how they can hide the but reveal more of it as they move forward in the game.

You're absolutely right, spills are definitely a concern with any tabletop gaming! Thanks for pointing that out. The good news is that the plexiglass top is there for exactly that reason. It provides a solid barrier, and because it extends over the edge of the TV, and the detachable frame is screwed tightly on the plexiglass, any spills should stay on the surface for easy cleanup. We designed it so you can quickly wipe up any accidents before any liquid seeps into the frame. Since the players are in their mid-20s, I trust they'll be careful with their drinks. But for added peace of mind, I could easily add a silicone bead or even a weather seal around the detachable frame for extra spill protection. Overall, the plexiglass top should offer a good level of protection, but I appreciate you thinking ahead! Thanks for watching Paul

Thanks for reaching out! You're absolutely right, there could have been a check valve issue. I actually double-checked the brass fitting after I heard some leaking initially, but to my surprise, it didn't have a check valve at all, just an open connection for the hose. After tightening it back up, the leak stopped completely. It is strange though, like you said, a check valve would make sense. Maybe on this older tank it rusted away or perhaps there never was one. Either way, glad the leak is fixed now! I dug deeper and found some part lists with schematics for Porter-Cable compressors: www.toolpartspro.com/porter-cable-parts/air-compressor-parts.html Unfortunately they do not have my specific model number..strange. Those that do have a check valve, none of them have that part as available. At least now it does fill up the tank much faster as before all the compressed air as it was being pumped was leaking around that little ring and it took forever to get to pressure or at times it barely made it to pressure before it would turn on again. I actually do feel a little more relieved it doesn't have a check valve in case the pressure goes to high the rubber hose should fail before the tank fails. Thanks again for your comment and helping me think through the possibilities!

Haha, been there entirely with the "hate this thing, but replacing it feels wasteful" feeling! But hey, for $17 and a little TLC, hopefully it's back in business for you! Check out the comment from @johnmolnar2957 that I pinned. he brought a good point about the check valve. As I mentioned, if you watched the video to the end, you'll notice that I did hear some air leaking so decided to go ahead and check if there was something at the end of that black hose to the tank. Mine did not have a check valve, or possibly rusted completely away but doubt it. The connector looked like a plain hose connector opening. I left a link in his comment that have hundreds of models with schematics of all the parts. Hope you can find your model. Cheers Paul

Thanks for the feedback! I hear you about the length, and you're right, 10-12 minutes is a great target for RU-vid. It's awesome that you liked the content overall, and that linking to specific points was helpful. In the future, I'll definitely focus on streamlining explanations for viewers familiar with the tools. Condensing the "other stuff" like Torx explanations and jumping quicker to the repair itself is a great suggestion. Going from 2 hours to 22 minutes is already a huge accomplishment for me, but you're right, there's always room for improvement. I appreciate you pointing out areas to tighten up the videos and make them even more engaging for viewers! Cheers Paul

Thanks, hun, for sharing! I'm glad you think it's a really cool way to save money. Fixing the Porter Cable 150 psi pancake compressor was a fun project, and it feels great to keep it running instead of buying a new one. Your support means a lot!

Thanks for watching! 👀 Do you have a CNC or are you planning to get one 🤔?

Aw, thanks honey! Glad we could banish the wall emptiness together. Next project - your suggestions welcome!❤

"Hey there! Thanks so much for the love on the Canadian Flag - really glad you enjoyed it! Seeing someone happy about a Canadian flag on RU-vid makes this Canuck proud! Your challenge to make it without a CNC is fantastic - that'll definitely take some ingenuity. Maybe I'll have to try a no-CNC project in the near future! In the meantime, good luck with yours, and be sure to share it online if you give it a shot!" Paul @DustyWorkbench

Hey @Scrapper666, thanks for the interesting observation about the wave pattern! You're right, it does look more like flowing water than a traditional flag. Here's the thing - for this project, I actually bought the CNC file off Etsy tidd.ly/45Pm1Z6. They had a bunch of different flag designs, and some definitely had a more realistic "flapping in the wind" look. But, I actually liked the unique, almost abstract, take on the maple leaf that this particular file offered. It's true, it might not be the most historically accurate depiction, but I think it adds a bit of artistic flair! It kind of reminds me of how some abstract art is open to interpretation. What do you see in the design? Maybe this is the flag after a powerful Canadian storm, or perhaps it's a more stylized representation of the maple leaf. I'd love to hear your thoughts! Thanks for watching Paul Dusty Workbench

When I saw the design on Etsy I wasn't sure how it would look in real life but it really did turn out great. Thanks for watching.

@@DustyWorkbench We must do an Ottawa meet up at some point. I wonder how many of us there might be out here!!!

From Ottawa here. Hoping to get a CNC by Christmas!

Thank you for watching. I only used a temporary set I already had laying around the house as I am planning to integrate the sign in a new shop wall design...at some point. I had a set that was made for putting behind a TV like this one: amzn.to/4cpJsdY

That's a funny catch! Peaceful vibes are definitely the goal here. Seems my wording needs some work, huh? Regardless, thrilled to have you join the happy crew! Paul

I was a full 32 seconds into the video before I realized it said Our and not Gun. I'd suggest if you remake this you use a different font. But if I make this, I might opt for Gun instead, lol.

So glad you like it! This design was a lot of fun to create. It can be tough to judge size from a design, and I'm my worse critic. But hey, the important thing is that the wife likes it, and it turned out pretty good. The next one will be better ;) Thanks Paul