Thanks for the video!! I wonder how these pedal toppers sit on top of your wampler pedals. I love wampler pedals but these round switches are so annoying. Do you have any workaround?
You’re the only person I’ve seen who also uses a Feedbacker on their board, that one pedal is by far my secret weapon for ambient loops and creating soundtracks along with my EHX HOG, freaking awesome pedal !
Do you know the exact measurements for the rubber feet? The link just takes me to a search list of them. I bought the ones at the top of the list and they were too big. The screw was also bigger so it didn’t fit. Any help appreciated.
The feet are about .25 inches in height and give 1.5 to 2.5 inches of clearance from the ground. I have a bulky Strymon Zuma that touches the ground a lot being placed underneath my board so I need to replace the feet but also am not sure which ones were used in the video for the same reason you mentioned. I, too, am not sure which feet to buy because I’m not sure what the diameter should be for the hole in the new feet to feed the screw through adequately where it’s not being moved around excessively because of too wide a hole through the feet
Yes, the Zuma fits underneath my Duo board. I attached it using two quick-release plates. The only downside is that the huge plug doesn’t fit well down there.
Can you put a pedal underneath the temple? As an example, i was thinking to put a SourceAudio C4 Synth + NeuroHub underneath, leaving up a Tech21 Midi Mouse and a expression pedal for control.
You know, I had plans to buy the 17” model for a smaller setup. I think the Temple Audio stuff seems to be fairly well built. By the time I bought a Voodoo Labs Pedal Power 2+ (@$200)… a TA 17” (@ $110)… TA’s mounting bracket for power supply ($21), TA’s Mains micro module (@ $49), TA’s 4-Way jack patch module (@ $49)… Then spend $20+ dollars in gas (@ $5+ a gallon) running around to find better fasteners than Temple’s substandard supply… I’ve got the better part of **** $450 F-ing dollars (AND NO PEDALS OR PATCH CABLES YET!!!) A bit over the top… 👎🏻 Nice video just the same… 👍🏻
Half of that is your fucking power supply genius. Also how fucking far did you drive for those fasteners? Two counties over. Yeah some of their modules could be cheaper but the boards are a decent price especially for not being made in China. Not fanboying over them but don’t be pissed because you spent like $120 in modular accessories to make your pedalboard “easier”
Another quick tip for the Trio users. You can remove the handles if you need little more extra space on the sides. You can keep the middle micro module slots on each side as empty so you can grab your board without the handles!
Hey there, great video. 2 quick questions...when I installed my 4 way jack, I noticed it's slightly lose. my screws were tight not not overly...I think the area around the jack that doesn't have screws is not as secure. Second, putting in the plug is close to the edge of the board...it's almost impossible to fit the screwdriver in there for the second screw...any tips or experience in what I explained? Thanks in advance for your help.
The end caps are removable. First you remove the rubber feet and then you’ll see two screws to remove the handle on top. Then pull it off. I learned the hard way that you need to attach the AC adapter once you remove the endcap, and then replace the endcap before mounting something in the center modular hole.
I just discovered these boards and really like them compared to my pedaltrain novo 32. I do gig with a band though and haven’t seen any soft bag or hard shell carrying cases, do any exist for these boards? I’m also thinking that I’d probably use all dual lock but having more options is definitely alluring. I just might sell my Novo 32…
@@sleeepingpills I saw them a few days ago, man they are super expensive, the cases that is lol I’m now debating whether these or a Rockboard so we’ll see!
I'm downsizing my pedal board I had a homemade one I need one the size you got I was thinking about a mono pedal board and then I started looking at the temple pedal board any regrets on yours that's the exact size I want and how is the case that you have I loved your video and I just subscribed to your channel thank you
Great video. Few questions: - How is the power supply mounted? I can see a knob underneath but nothing coming out in top. - you mentioned using a wireless, have you tried putting that underneath as well or does it not work?
Here’s a link to the mounting brackets: www.templeaudio.com/vlmb As for the wireless, I like having the receiver on top because it’s easier to dock and un-dock the transmitter. I suppose you could mount it underneath if you really wanted it to!
Woah… this was a great video. Straight to the point, and actually helpful information. I don’t have a Temple board, but learned a few things that I never thought about. Bravo, sir!
Use 3M dual lock instead. Its a bit more expensive than your typical velcro but you’ll love it once you try it! Not too much though or you’ll need the jaws of life to remove your pedals lol
Don't use the adhesive. I use dual lock onto the plates and the pedals. Easier to remove and replace at will. This avoids having to replace adhesive when rearranging around pedals.
Excellent idea. I bought a keyboard stand and have my 34" duo on top of that with the feet removed and dual lock locking it to the keyboard stand. Works Fantastastic and easy to get under it (wide open) for wiring and easy to remove if you need more access.
dumb question but that means you mount the sticky ends of the dual lock on to the sticky end of the plates right? just wondering what if one would need to replace the dual lock on the plate
@jonnyma by default, they come with the adhesives on the mounting plates if bought new. But I'd remove them and just place the dual lock as we traditionally did before with one on the pedal and another on the mounting plate. Save your money, don't waste them on adhesives.
@@cheeher3212 ahh gotcha yeh cuz it looks like the plates are shipped already w/ the adhesives fixed on the plates. was it pretty easy removing the adhesives from the plate (e.g. did you use any adhesive removers like goo gone)? i'm getting my plates in a couple days so gonna go through that process soon haha
I absolutely love it! After using the Boss WL-50 for many months, I've found the Line 6 G10S to be much more reliable. No dropouts, and more channels to manually select. Definitely a user for life!