Ваууууу

3:52

I have this exhaust on my 350z and I like it a lot less than like a tomei expreme ti or invidia gemini

So I installed it the way it was supposed to but the v type lights with the animated lights don’t work 13:07 does anyone have a solution

i went with the hz motorsport axle back sounds much better than the top speed really was trying to limit the rasp

Как заказать?

Hello, I live in Germany, are you from Germany?

My 2011 scion tc oem passenger side taillight does not have a reverse light. This tailights will still work with the reverse ligh on that side?

I have something similar to these but the led circle of one of them stopped working, can I check it up without removing the whole unit? Any suggestions?

The LED tail lights like in the video should have come from the factory.

Can you tell me if there are any interchangeable springs for the Adv. Z for the Altezza? The springs are the same as the ones from the Basis Z and are soft as f**k and though the 16 step damping of the dampers works quite well the kit is still TOO SOFT. Unfortunately my supplier/seller is a useless and unreliable guy and doesn't give me any support in that case :( I also installed front and rear strut bars but while cornering simple on the road the car is still swaying like a 20 year old sofa :( I guess the springs from the Flex Z kit have different diameter and I'm not sure if any springs from an Aristo kit would fit or make any difference. So I'm desperately looking for help!

Won’t this cause hyper flash? Or the resistance built in?

god, i didn't even know that on youtube is not a video how to wiring this kit, i installed twice on my 96 and 99, well i could made a video but well i replace all wiring for some rgb, i hope somebody reading this buy/bought them and made a video for the comunitty

Long time fan of TEIN. I’ve been out of the Honda game for some time but glad to see the R&D game is still strong. Looking into this for a friend with a 2023 Civic and for the person asking about Lexus…your car weighs more so you don’t want anything entry level. Step up and stay safe!

That was pretty lame. I thought it was going to be installation instructions.

I'd rather throw something like that in a cheap used utility trailer, and pull it with a sub-$35K Lesbaru or Maverick. Seriously, my Crosstrek gets around 30MPG pulling my 14' boat and 20HP outboard. It can top 40MPG unladen, and has some kickazz roof-rails too. Knuckle-draggers think they need an expensive guzzling full-size pickup to occasionally haul stuff...then abuse the expensive tires, axle, suspension, paint, and sheetmetal with stuff that a cheap trailer, pulled behind just a modest CUV, would handle without a whimper. A little Crosstrek Wilderness could even haul a 300lb dualsport moto on a hitch-rack. 😂

This whole video just got screen recorded and posted on this RU-vid channel huh

does this fit the sport model I feel like the hangers are the same

Looks like the outside reflectors were picked up from a truck stop shelf. Everything looks great, but that makes it look cheap.

bruh my tail lights don’t have any threat on the bolts lmao

What were all the tools for and other wires this didn't show anything

Can you replace/upgrade the factory bulbs that come with the housings with hid led bulbs? If so any risk or limitation to the wattage or lumens to avoid damaging the lens/housing?

Y dont they make these for sedans?

Great video. Thank you for the help!

Do they come with the high/low beam bulb or you need to buy seperate?

Wanted to do swift springs but is tein better

Good thing they put that tarp in the back. Dont want to scratch the floor😮

Mine came with wires. Do i have to hard wire it? And if so, to what wires do i connect them to?

I can't imagine buying dirt

Gracias 🙏🙏

2015 si sedan, lookin to lower the car but still have the comfortable street ride not a stiff bouncy ride...what do you suggest?

How do you adjust the high beam?

I actually like the sound of this, might look into buying one

Will this affect the check engine lights in the dash after changing to a lightweight flywheel ?

Please i need help with wirings

Nice DIY video. I think I’m going to order these. 🙂

Where I can buy this light, please?

Jet Black Projector Headlight Fits 2006 Mercedes Benz Sport W203 C-Class C230 LED Bar in black color, this is the next change I’m going to make. I will also paint the rims with gloss black polyurethane paint and add Sequential LED Mirror Turn Signal Lights. Greetings from South Florida.

You missed the most important part about wiring the halo rings and DRL. The video is pretty useless, tons of videos showing how to remove the headlights.

Today would be a stupid way to lower the car with the coilovers installed. Can't turn the black part while it's

Is this good for Honda civic Si coupe 2020?

Is this comes with bulbs already h1. Will it fit to hb3 sokcet

Thank you this really help me out

You barely hit VTEC in the outside perspective

Hi can i order for C200 ? Do you ship in South Africa?

I wish you would have added informed on how to connect the wiring

If your going to modify the exhaust don't modify it to be loud. for this car you want like a low grumble. Not high pitched like this one

Sorry it sounds like a tin can. I have the new turbo version and thought about customizing the exhaust until seeing this.

I have the flex z on my 98 eagle talon tsi awd that I bought from redline360. It says they're 16 way adjustable but they have a total of 26 clicks. So I'm confused.

Do these come with resistors included for the turn signals?