DIY hacks, Crypto, Technology and Moneysaving insights... You're in the right place Savages. Handyman Savage merch store: teespring.com/stores/handyman-savage-attire We now have a Handyman Savage Discord Channel: discord.gg/AtRzhwbC
Bruh I followed to a tea, everything exactly the same, got the right bios, held the button, then light stays solid and nothing on display. Then I figured I downloaded the wrong one. Nope. Exactly the right one. Now I’m stuck
Also, if you’re doing it via the Omega filter like that one, screw the magnet out the top first before you drain it, to release all the sludge, otherwise the inhibitor will be stuck amongst it all. Good informative video though!
Thanks, appreciate the feedback, I usually get the magnetic filter cleared out when i get the annual boiler service, but i'll remember to do that before applying the Fennox next time.
I've had the boiler and expansion vessel checked a couple of times, all plumbers said it was a leak in the radiator piping somewhere, but so far this solution has plugged the leak wherever it is. Do you know of any methods to pinpoint where in the system the leak could be? I've had leaks where a patch on a ceiling has revealed the location, but this current leak did not show any obvious location.
Hi, have you tried checked & tested the BIOS configuration? Does it have RTC wake up settings? For example, to automatically turn on every 7AM in the morning everyday?
Yep, I can 100% confirm the RTC wake settings work. I use this PC for a Crypto project (Threefold) which requires the unit to be woken up daily, so the motherboard wake up worked perfectly.
I like the concept but How do you measure “watts” for their profitability calculator ? They claim 1 watt is 1000+ yearly ? Huh ? Plus how can US residents even liquidate their SCXH or whatever tokens , it’s not even listed on Trade Ogre, And not even swapable on Tangem wallet , so how are you supposed to actually make your ROI back if you can’t sell any of the SCXH tokens , exchanges like MCXN aren’t Available in the USA . So ??? Someone answer these two questions . ??????
@@WooDeWow I'm sure that's the plan down the line, but yeah I agree the project should be on exchanges where all can transfer out on to appeal to a wider audience.
Yh. I had a similar situation with my miner. I had to to glue mine too from inside in order to keep zhe LCD back in place. They didnt even bother to respond to my mail when i wrote to them about that. I dont think has much to do with shipment, its just poor build quality.
Can you please help me, soo i connected And i have a few questions -for generating entropy during the week i need to hold open app "Smart Connect" and be connecting to wifi what i choose(i cant change network ) and device ESP-23-S3 should be connected to usb near my phone or its can be anywhere - What should i do if i want to connect two more devices? Sorry for stupid questions BestRegards
Hello, don't worry about the questions, I ask silly questions to get informed all the time. You only need the Smart Connect to enter the Wifi credentials, once that is done, you don't need to open the Smart Connect app again. -Essentially that sets the Wifi for the board so that it communicates directly with your WiFi hotspot for communication. When setting up the device, yes i did have it near my phone, but once the wifi part has been done, you can connect to a USB port anywhere where it can get to the Wifi hotspot, it can even be standalone in a USB plug, no PC or any other device needed after setup. A great example of a set and forget crypto project. You can setup more devices in the same way, not sure if there is a limit, maybe ask in the Discord on that question to confirm. Also, make sure to claim the tokens within 7 days, the entropy webpage has the Claim button active. More info here: docs.puredepin.com/ENTROPY_ZERO/claiming
You can get the parts from most DIY shops or you may just have them lying around in a workshop or garage. Then simply follow the video to make the bracket. It's not something you buy, this is a DIY build.
I believe their is a pre-release of 1.7.0, but i'm waiting for the official release before trying, as many reports of blank screens with 1.7.0 at the moment
@@DJ.PhoenixlSandra Der Ventilator saugt Luft in den Nerd Miner, um ihn zu kühlen. Die warme Luft verlässt das Gitter an der Rückseite. Dies hält die CPU kühl und stellt sicher, dass die Miner-Hashing-Rate konsistent ist
Got 2 of these last week, both arrived lcd missing, with the price going down 8% a day everyday without fail nobody will roi unless they got there’s sub 200 devices online, as for other projects building on there blockchain which is meant September ( they will delay) you can only hope they bring value to the chain, might be worth selling these at a loss and moving into another project, nice video though 🎉
I got mine today also - screen came unglued and was somewhere inside the case - removing magnetic sides w/ other magnnet and got inside and fished it out.. this thing is HEAVY and has that giant ugly batter. This the least eco friendly miner ever
That might be the case for this token, but i'm sure it was mentioned somewhere that other projects and tokens are planned to come onboard this SolarX miner. It would be pretty cool if this SolarX miner could multi-mine tokens.
Funnily enough I am in the process of doing something very similar. I have one battery bank which is charged by Solar, but I end up with a surplus of solar (as the battery isn't used much), so I am looking into charging a second battery bank with the excess solar. But the essential ingredient is a dual battery solar controller (i think).... Although this remains to be tested, video coming soon.
what is the best wallet to transfer bitcoin from this device to the wallet? Will BlueWallet work? I would then like to exchange bitcoin for money on PayPal, if possible
If the silicone is on the bottom, but just on the front edge, then you might be able to use the same method to pull 90 degrees down, but chances are you will ruin the silicone whichever method you use.
Thanks for the video. I have 4 batteries for an electric motor pontoon and was hoping to have two 50 watt solar panels (one panel per 2 batteries). I have two questions 1: Can I leave the load connected while parallel charging? and 2: Currently the system is charged by a Minn Kota 4 x 10a battery charger so each of the batteries are hooked up separately from the charger, if I switched to solar would I need to also switch the load hook up as well? Thanks for any guidance, Andy K
Hi there. 1) Yes you can charge and run a load at the same time. My solar controller (depends on the type) will do a great job of getting more juice (Bulk charge) out of the panels while charging and running a load on a daily basis, only stopping the load to let the battery fully charge using an automated switch (check out my video on Solar Powered Doge Mining). 2) Not entirely sure, but aim for a Solar controller which goes beyond the max possible capacity and it should be fine, but again it depends on the config.
Hi, I have a huge problem with my TT2040 machine that I had just repaired. My girlfriend accidentally dropped it and the ABS housing of the head (the one for the zero finish) broke. Do you happen to have this spare part for sale? I need the entire ABS mechanism that follows the lines of the body. Thx
After installing I get the error message that says the PC doesn’t currently meet windows 11 system requirements here’s why The PC must support TPM 2.0 There must be at least 4GB memory Please advise what can I do
You could contact Hozelock and ask them the part number. Simply tell them the Hozelock model and they should be able to trace the exact part number for the Raceway Lever
