Altered Addiction Tattoos. Located at 56 1/2 main st Hudson falls,NY 12839. This channel is dedicated to tattoos and tattoo supplies. I disappeared for a few years but I’m back now 2023. I will be uploading weekly possible a few times weekly. This is a little look into my life.
What would you say are the main differences between the Mars-U and the Seher? Obviously, the Seher has the touch-screen, but aside from that, they seem very very similar. Also, I wonder how the Seher touch-screen works when wrapped with barrier tape for instance? I can't make up my mind whether the best way to go is the Mars-U or Seher? Any advice would be appreciated. Thanks!
What’s your price range because there’s some good budget machines I own the dragonhawk x5 been using it a month or more and I also have the cnc Q2 short, I like the dragonhawk more it’s 4mm cam and direct drive and wireless but I can’t take it apart like I can take apart and clean it so for learning on mats it my favorite but if your going to tattoo people try to get a machine that can be taken apart like the ambition torped and it has extra cams so even tho I don’t own it, I probably will buy it just to have a machine with the 5mm cam, or get a coil machine and they sell liner and shader kits for 50$ and you def can learn with that, and tat with it
I wana get this machine I just got the dragonhawk x5 and it’s a 4mm stroke compared to the cnc q2 that’s 3.5 and I want to try a longer stroke for lining and especially this machine for this reason
@@alteredaddictions6063 I have a torped I used for lining with the 5mm. That’s the problem I couldn’t decided whether to get seher, mars u, or another torped lol. Guess I better get another torped lol.
Try Not to hold It upwards to Put it together. I guess you finally figured out, that you have to line up the Push rod properly.😅 Its a good exercise too. 😅😂
Ok so I did an entire half sleeve with it. It does the job for sure. The 4.2 lines well and the shading is definitely great. My favorite machines at the moment are the ambition sol nova 4.0 for shading and the xnet flux max for lining. Ambition and xnet are the same company pretty much kind of like both my companies in 1. The xnet flux max is one amazing liner. The vipera if u want an all in one machine this definitely is a good one. I think it’s better than the dragon hawk fold pro and the mars u
I do have 4 Ambition machines so far but I’m always looking for the next one. I am aware that XNet and Ambition are the same company and that’s the only reason I’m looking into them. Since you seem to have a variety of Ambition and XNet machines, what would you say about the Lutin and the XNet Vane? I heard great reviews on both
Yes it should. For larger liners I actually use the ambition torped with the 4.5 cam. The seher I mainly use as shader. I have around 25 machines and each one is set for a certain thing. I only use ambition and xnett machines. I was loyal to cnc for years and they have good stuff but now it’s just ambition and xnett. The best liner I’ve come across right now is xnett exo machine “flux max” clone. or the exo stealth clone. I have videos on them too. I actually have 2 of each because they are amazing. I just got in the sol nova by ambition and the flux by xnett today. I will have videos on them posted by Monday.
@@richardsalazar9738 yea I wouldn’t expect it be better at all the guys at bishop know what there doing but how long have you had the torped and how is it holding up
Hey fellas, just purchased the Lutin machine and want to know if I made the right decision. Coming from a Bronc v7 machine. My v7 is my daily and good but I been rockin it for over 2 years and I purchased the Lutin as a back up. But I need it to push lines and I do back and grey realism aswell!? Thanks ahead
Hell yeah brother, thanks for the showing. Been thinking really hard on moving over to rotary pens. I think ill order one of these kits and see if i like it or not!! (Something tells me i will lol)
Just bought this as a newbie. First time setting it up. The needle cartridges it came with won't lock. Like at all. I can't twist them whatsoever. Does this mean the machine is busted?
To bad that wasn't the pill tattoo machine he was using! Dumb ass's get it right at least put the right name of the machine your using in the description!
The aurora is not a critical product with all due respect either your trying to sound like u know more than you do you truly just have no clue or haven't used quality machines needles power supplies ECT. Or your trying to scam people for your own gain very sad I hope it being a year since youve posted you have changed up your thinking and bought quality supplies tattoos aren't just expensive because the art and knowledge but because the expectatin is you have quality professional products that are safe and run the way they shud u promoting hawink tattoo ink in a video is very irresponsible
There's no way this is healed it clearly has ointment on it your work is very very spotty at best with all due respect your artist Rob seems like he knows what's he's doing but is this a legit shop?
Hey bro great vids just recently bought the q3 at your suggestion! Just wondering a good starting voltage for lining and shading as I'm just switching over from the coil!
I love the excitement in you in your videos. Can you tell me whether the pill q3, q5 and q1 can all run continuously? Greetings from a German tattoo studio!
So the question I hope someone can answer me is why can I only find this "Stigma" machine on Amazon? Is it a fake / replica machine made in china? How much do those machines differ from the high end ones like cheyenne, ego, stigma-rotary, equaliser proton and so on.. I've been tattooing for quite a while with a normal coil machine.. Now I want to "upgrade" but still move in a low budget area. Which pen could you recommend that is reliable and wont burn down after 3-4 tattoos?
Is there any difference in the stroke between the two machines? I've read the Q5 has a 3.2mm & the Q3 has 3.5. but I've also read that the Q5 grenade has a 3.5.
I have a CNC Q2 and it also has a 3.5mm stroke, I also bought a 4mm stroke for the machine that I can easily swap to. You can buy a 3mm, 3.5mm and 4mm stroke/cam all in one for the CNC Q machines from the CNC website so you can customize your machines stroke to what you like. I’m thinking about buying another CNC machine so I can switch between machines if I needed to.
@@TaterGrabbinBass yeah I ended up getting the CNC Q1, Q3 & Q5 but ordered a 4mm cam for the Ambition tattoo machine that I made to fit my Q1 machine. All 3 machines work well though.
@@arielcoppola9186damn I was going to get that one too but the CNC Q5 grenade I got. Its amazing! Never pooped on me or anything. I wish it was thinner though
If you are making as much as you say you'd be using much better quality machines. Mast pens have no 'give' which means they hit very hard so you have to be experience to get crisp straight lines.
Great video.. Solong/Stigma/Hawink is my favorite tattoo company. The quelle cartriges are great. I just bought the Q3.. my question to you is why do you like the Q5 grenade more? I was thinking about getting one of those also. Thanks!
Graffics 76 the q5 lines colors packs and shades like a dream. I have the q3 it’s amazing too. It’s about neck and neck the same. Idk my q5 is daily driver I must say. I did just order the q1 it will be here Friday. I’ll do a few vids on that too.
@@alteredaddictions6063 yeah the Q1 Looks nice too. Looks a little thicker than the Q2 & Q5, which are one of the next machines I want. I think I'm going to try the Q5 next for sure. You're art is phenomenal BTW!