We are a company specializing in the development of electronic timing systems. If you have any related needs, you can contact us by email:xiaozheng003@gmail.com. You can also follow our website: www.66start.com
I am getting ER2 and ER12 messages on the readout. The system will not function at all. Cannot find instructions anywhere on the net. Please advise. Thank you
This error code means that the display cannot receive the wireless signals from sensors 1 (starting point) and 2 (end point) normally. This is usually caused by exceeding the wireless communication range or antenna damage. Therefore, you can try to replace the antenna, which can usually solve this problem. If you have a more detailed description of the fault, you can contact us by email.
Many tripods for photography can be used on the market. You just need to make sure that the mounting screws of the tripod are 1/4 inch. Our equipment clamps and mounting holes are also the same 1/4 inch, which is an international standard. size.
@@Spartans22769 This is a light curtain sensor system that can detect the passing of some objects to generate trigger signals. These signals are transmitted wirelessly. We can calculate the interval time between these signals. This system is customized by a customer , it is used for training timing of UAV flying machines. I'm not sure what specific information you need to provide, so you can send me an email, xiaozheng003@gmail.com we can discuss in detail
Without distinguishing between tracks, if it is a sprint event, you need to use a high-speed camera timing system. This is an expensive system, but it is very useful and accurate. If it is a type of event such as middle-distance running or marathon, you can use an RFID chip timing system This is also a relatively expensive system. In addition to the above situations, laser and infrared systems cannot record time without dividing lanes.
@@vybzsport Whether it is a camera timing system or a chip timing system, we can provide it, but these systems are more expensive. The price of a camera timing system is about US$25,000-30,000, and the price of a chip timing system is about US$10,000. Will you need it? If you need to purchase, you can send us an email: xiaozheng003@gmail.com
Mode 3 is a multi-turn mode. You need to press and hold the small button of the control box, and then plug in the power of the control box. At this time, the voice prompts in the speaker can be heard. After hearing the voice prompts, release the small button and short press again. The small button is to increase the number of required laps. Each time you add one lap, the maximum is 30 laps. After 30 laps, it will cycle back to 1 lap. When you hear "three", press the big button and the system will issue The voice prompts "Set successfully", so the timing will stop after 3 laps. The interval between triggering the end point takes about 2 seconds.
This is a system we customized for customers and is not mass-produced. Do you also need such a system? How many tracks do you need? If you also have customized needs, you can send me an email and we can discuss more details. xiaozheng003@gmail.com
If ER.12 is displayed. This means that the display screen cannot receive the wireless signals of laser No. 1 and No. 2 normally. If laser No. 1 and No. 2 are particularly close to the display screen, such an error may occur. Place the laser a little farther away, usually more than 2-3 meters, and then power on again. Another possibility is that you need to check whether the antenna is installed properly, or the antenna is damaged. You can try to replace a set of antennas and test again. If you need to buy a new antenna, please contact me and I will recommend a suitable antenna for you.
Can you provide some photos and videos and send them to my email address? This will make it easier for us to understand the specific problem and help you solve it more quickly. xiaozheng003@gmail.com
Normally, I rarely use whatsapp You can send me an email: xiaozheng003@gmail.com The model you are looking at is X-005, and the price is about $500. . If you have more detailed needs, I will recommend the most suitable product model to you.
How far can the starting sensor be placed to the last or the timer? I'm planning on getting one for an MTB race where the race starts fro. About 2km+ away from the finish line with forest in between them.
The starting point and the ending point are preferably 200-300 meters in a straight line (maximum 500 meters). If the distance is 2km, it is beyond the communication range of this device.
If you see the fault code of ER.1, it means that the display screen cannot receive the wireless signal of No. 1 laser (starting point) normally. At this time, please check whether the antenna of No. 1 laser is installed normally. You can also email me if you have any other questions xiaozheng003@gmail.com
Hello, this device is customized for our customers, What kind of timing system do you need, is it exactly the same as this system? Or do you have any other requirements? You can visit our website, some of our equipment can be sold directly on the website--------------www.66start.com You can also email me to customize the timing system you need EMAIL:xiaozheng003@gmail.com
What tests do you need such a system for?This is customized for one of our customers.If you need the same system, please email us. xiaozheng003@gmail.com
@@zhengxiao76 I want it for four-way horse racing. It must have the following characteristics. Individual timer for each path. started the account with a laser. All timers must start at the same time. a single screen where all times are seen.
@@rodrigoaranda3481 ok, i see, maybe it's a door that triggers a laser door when it's opened, and starts the timer If you think my understanding is correct, you can leave your email address, Or you send an email to my email and I will send you a quote to your email later xiaozheng003@gmail.com
Hola me gustaría conocer más sobre el producto. Mi idea es medir carreras con un único disparo de inicio y que se realizan en cuatro vías. ¿Será posible?
Hola muy buenos días. Me comunico desde Argentina. Estoy muy interesado en adquirir el producto. Pero antes quiero informarme mejor. Lo quiero usar para carreras en cuatro carriles diferentes. ¿Será posible hacer eso?
We have other models of timing systems, which should be able to meet your needs, if you need, please send me an email and we can send you relevant video materials My E-mail: xiaozheng003@gmail.com
If you do not use the control box to start the timer The two screens of S-003 can be interconnected to form a starting point and an ending point. There is a laser sensor on the side of the screen, which can achieve the same function as S-001
We have another type of device that does not need to start the timer through the controller, but can start the timer by triggering, and it can achieve the function you describe.
@@zhengxiao76 Thanks I saw that one but it's only single timing. What I meant was a timer that can manually starts 2 lanes simultaneously but has a trigger at the start to measure reaction time before or after the timer starts and then triggers at the end to stop timing.
@@CptEvil We do not have such off-the-shelf products, but can be customized according to your needs. We have our own development team that can complete your requirements, if you need customization, you can leave a message to contact us, or send us an email xiaozheng003@gmail.com
If the error code of er 1.2 appears, it means that the display screen cannot receive the wireless signal of the start and end lasers normally. You can try to check whether the antenna of the display screen is installed properly, or whether the antenna is damaged, You can also send us an email about the state of your device when it is in use, take pictures or videos, so that we can help you more easily determine the cause of the problem. Our email is: xiaozheng003@gmail.com
If the code of "ER.2" is displayed on your screen, it means that the display cannot communicate with the laser at the end end. Please check the power supply and antenna installation of the end end laser. Make sure that the power supply is 5V 2A and the antenna is installed. At the same time, please make sure that the distance between your terminal laser and the display is at least 2-3 meters, because the transmitting power between the antennas is very strong. If the two antennas are too close, the antennas may have the same frequency interference. At that time, you only need to control the distance between the antennas to 2-3 meters away, and re-energize, and the problem will usually be solved. If you have any questions, please leave us a message and we will reply you as soon as possible
@@dtroutmann Can you record some videos so that I can better judge the problem you are encountering, and I will try my best to help you solve the problem You can send to my email xiaozheng003@gmail.com
I figured It out. we have almost 10 systems and someone packed it up incorrectly. We were trying to use two systems with different parts and serial numbers. Once I found 2 lasers and a timer with all the same serial numbers it worked perfectly immediately.