Hi. I have a different Sony Vaio Z series laptop and a different type of SSD which i am struggling to convert it to a normal SSD or SAta or whatever. The SSD used at the laptop is Samsung MZRPC128HBCD-000SO 128GB 1.8" LIF RAID SSD. How i can connect this SSD to a normal pc and copy my files? Is there anyone have a clue about this? Thanks
Bravo! I couldn't help but laugh at your comments as you were tearing it apart and putting it back together. It's quite similar to what comes out of my own mouth when repairing things.
Thanks for the video ! I replaced by gimbal mount too and your video helped !! I was able to replace it without removing the fan and also was able to leave the FPV camera in and connected as well.
Super helpful, thanks - managed to take apart my GH3 screen to find a rip half way through the ribbon. Waiting on replacement, will update with how it goes!
I'm just starting to tear my down and I notice you start with it taken apart. sure would be helpful to know the tool size but that no big deal. beats the guy doing everything in time/lapse, didn't learn a thing from him. Thanks
I replaced my ribbon cable with a new one. I met started well and I was happy it worked. Unfortunately, after flying for 20min, the same gimbal motor overload issue reappeared. And the gimbal gets hot really fast, only after starting the drone for 30sec it’s already very hot. I opened the gimbal again and tried fixing the ribbon cable. But it didn’t help. Any idea what else I could do? Replace the whole gimbal? Buy another ribbon cable from another company? Thanks
To clarify, what does 'opening the motor' due with regards to fitting it on the bottom bracket? If it's a simple bolt or or even small filing that's cake. Did you have to get a different chain ring for alignment?
@@lucasrecasens nah I saw one online with the issue, assumed its either an SD card issue or you could theoretically change the port but this channel dead by the seems
Thanks for your video. Same issue with GH4, only touch screen didn’t work. After I replace new screen cable, according to your video, screen is not working any more (no picture at all). I have tried with another two new cables, just simply connected all together (open housing, without wrapping cable around screen holder...) but still not working, even viewfinder is not showing anything. I can see only green indicator for camera on/off. Do you have any idea what went wrong? I will be grateful for your help.
@@MlleLittleDream Yo guys, did yall fix this problem somehow? I replaced cable, viewfinder works, but screen and Fn5 + playback button doesnt, I really dont know the reason.:(
@@DavidFoltin23 hello ! Yes I try again with a new cable and the touch screen works now. Oh, sorry for you, maybe you have disconnected an other cable? Have you open the gh4 to see?
Love the rebel creative style Bullitt you made! Amazing. I am riding a Ebullitt E6100 hich is 5000 euro. This seems like a great alternative with much more cotrol over the settings. How much did the battery pack cost you? Also is it possible to use a gates belt drive with this set up? Combining it with an internal hub gearing system that might reduce wear on the drive train.
I was lucky and got the battery cells for free :) The BMS was about 80€. With this motor any internal hub gearing would break because it has too much torque but you could use a smaller Bafang motor with only 250W. for a belt system you would probably have to make a custom chainring.
@@youser23 Thanks for your reply! I would love to build something similar, and already accustomd to the internal gear hub. I have a Di2 5 speed shimano hub which works fine for in the flat streets of Amsterdam. My Esteps 6100 motor has a torque of 60nm. The battery cell idea could work great if built into the bottom of the Bullit I imagine. That space between the vertical frame tubing is asking for something like that. Any idea what the max torque of your motor is? A custom sprocket for gates belt sounds like a job for an industrial CNC mastermind, so I geuss its chains to go with a Bafang for now. Thanks again. And lastly, did you know about the existence of butane powered espresso machines? :)
i'm not sure i might have corrected it down but anything behind the decimal point should be within tolerance because inside the camera is another regulator that doesnt need exactly 8.4V.
This is nice! The board is a Dc coverter right? I have a dummy battery, I plug it on my 2S lipo but says this battery cannot be used...Do I need this board while 2S Lipos already give the 8.4v that I need...I tried it without the converter and said "this battery cannot be used" Thank you.
this will come up if a motor current is too high for example when something is blocking one or several gimbal motors. or if you have som sort of short circuit in one of the motor phases.
