Also, I was wondering what kind of wax and how to use it to fill the back side? Also, what brand of marker is used for the faux patina? And sealant for faux patina? Sorry I have so many questions! :o)
I love your videos! I'm just beginning metal art. Are you going to do more videos? You are a thorough teacher and I appreciate your willingness to share your knowledge.
You show your example can you just tell me what size the thickness of the foils? it’s micons 36 gauge is 5 micons? What was the color sheets microns? What was the the micons of your lovely samples, what was copper/pewter unleaded what micons? Thank you😮
The thickness of the metal tape in the video is in microns. The pewter and the aluminum are gauges. The gauge for every metal is different. The pewter in the video is 36 gauge, which is ± 0.150mm thick. The aluminum in the video is also 36 gauge; however, it is ±0.135 thick. The colored aluminum in the video is ± 0.05mm thick. They also come in various thicknesses. Copper is substantially thicker than pewter; however, thinner copper is available. I hope this answers your question 😊
Just found you. Love this project!! Thx for sharing your talents! Will you please tell me what you used to then apply the embossing powder; what the round tool is called that you use to press down on the stamp; and what you used to distress the sides of the canvas. Thank you for your help. Love this tutorial!
Thank you for the kind words. 😊I used an Embos It Dabber from Ranger before applying the embossing powder. It is convenient to have one, and there is also a pen you can use for smaller areas and not always have to use the stamp pad. The round tool is called a Stamp Barron from SpeedBall Art. I also have an old iron I picked up from a thrift shop that I use; it works just as well. For the sides, I've used mini stamp pad ink. Mine is from Stampin-Up.
I preferred not to use large strips for this journal front. When I use smaller strips of tape, there are more places for the blackening to "grip on," adding more interest and depth to my projects. However, I've done projects where I've only used long strips; usually, the end result I have in mind determines the size of my strips. 😊
If you use a nail file to remove the over lay of the tissue it will not tear. Wetten the edge (where you want it tontear) is also a technik I use to provent tearing.
Thank you so much. I'm glad to see you found value in the video. The tools are on backorder from my supplier, and I hope to have them sooner rather than later. 😊
Hiiii I wanted to start embossing im new to it and I dont know what materials I should use. What do you call that thin metal you use to carve your drawings? If you could be so kind as to tell me where you get them? And perhaps where you buy your wax too? best regards
That is exciting, starting with embossing. You can use aluminum, pewter, or copper for embossing. You can check out my online store for the tools and metal. Here is the link for you to have a look at. (esmericart.com/storefront-shopping-for) I buy my beeswax from a local beekeeper. It is best to use unbleached beeswax. Also, pewter is currently unavailable but will be available soon - the problem was solved, and I am waiting for my order to arrive. 😊
Thank you for your kind words.😊 It makes me happy to see you find value in the videos; I'm holding thumbs to getting back to recording sooner rather than later.
Is there a demonstration on filling with wax? I find this very hard to do & it comes out a bit lumpy & not flat enough. I have since used polyfilla mixed with glue which is easier to get flat, but would prefer to use beeswax.
Currently, I do not have a video on filling with wax. Due to health issues, I haven't been able to record videos for some time now; however, when I start again, I will do a video on fillers, including wax.😊
Thank you for this video. I have been wanting to wrap embossed tin around a weighted baking powder can but I stop when I consider the trouble of bending the metal to the round. Worries gone. Thank you! I'm new to embossing and you have been the most educational teaching out there.
You can also place the metal sheet in an embossing folder and pass through an embossing machine, use same machine and die cutters to cut metal to desired shape before embossing!!
Using embossing folders and dies reduces time, especially when preparing for craft markets. I recently invested in a couple of folders that do the embossing and cutting simultaneously. 😊
Yes, I've created the layers using high-relief embossing on a single sheet of pewter; it is not done in the traditional high-relief way. Here is a link to a similar design where I show how to create the different layers step-by-step. I've also cut out this one to adhere to a wooden box. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-by__ozUOpxE.html
I'm so glad to see you found some answers in my video. 😊 Check our Karen's channel if you haven't yet; it has many tips on working with metal tape - www.youtube.com/@oarsumcraftsmadebykj3277
Sandra, if you are referring to wood disks, some have difficulty getting smooth edges, depending on the wood species. I usually start with a coarser grid sanding paper and end with a very fine one. Sometimes, I use an emery board to create a rounded edge. When I adhere two pieces of metal back to back together, I sometimes use a thin strip of metal tape to finish it. I hope this is helpful to you. 😊
May I ask a question please? I am working on covering a picture frame and the pewter is very uneven in the un-embossed spaces. What is the best way to make it flat, bearing in mind I don't want to flatten my design? Thank you for your invaluable lessons. You have started me on a very interesting journey.
A paper stump can flatten the un-embossed areas between your design. When using the paper stump, place your pewter on a hard surface and work on the front of the pewter, similar to when I removed the texture I added to the background around the daisies. If you need more info, feel free to email me at create@esmericart.com ~ I'm glad you are finding value in the videos.😊
great idea. I unearthed a box of used teabag papers that I had misplaced and this idea has has been added to the list of things to play with. Thanks for sharing.
This can get addictive, and the possibilities are endless. Check our Karen's channel if you haven't yet; it has many tips on working with metal tape - www.youtube.com/@oarsumcraftsmadebykj3277