Hey guys and gals, here is the link to all the great items we use in our RU-vid videos. All easy to find in one place. Check it out if you're interested. www.amazon.com/shop/influencer-973764b1
Thanks for the tips! We’ll be living in our 5th wheel during winter and I’m thinking ahead. Any non-reflectix options you can think of to allow light in?
If you go on their website they have mounts that you can purchase to put these sensors into. They would also work on the steel tanks, they will help you center it every time.
Flare the end of the top track and deburr so you don’t snag/tear the fabric. Use a ratcheting drill, not an impact drill, to avoid popping screw heads and stripping hole threads.
We just bought 2 xp 3.0's that came with a portable electric air pump. It charges via usb and can be used as an usb charger. It includes a flashlight and emergency light. You set the desired air pressure, connect it to the tire (or other item as it includes a bag of various connectors). Hit start and in seconds it will go from 0 to 30 psi (what i chose for tire pressure). As my wife and I both have a bike that included the pump we have a spare. If you are solo it may be good to have a manual pump as a backup.
Thank you for this. I think I hit a nail the other day. Looked at my bike this morning and the tire is flat as a pancake. Got an tube and repair kit coming tonight from Amazon that's similar to the one in your description. You made it look easy lol.
Liked the video, I bought 2 folding OX and the only thing I wish it had was an integrated tail light, do you know of one that will plug into nakto wiring harness?
Suggestion: You may want to level the RV as it would be in camping mode and then run your slides in before you calibrate. That way you would be able to check level taking in to account the variation that may occur when you set up the camper.
Question on the acorn nut and cntrsink bolt. The acorn nut doesn’t tighten down due to bolt being longer than nut can tighten. Am I missing a bushing or spacer? What am I missing here? Thanks for the video. A great assembly guide.
i always buy a comfort shwinn seat for my bikes because of a crushed pelvis from 25yrs ago but the hydraulic seat post is a must have, great review bro bro…
So once the unit is set, you pull into a site and it says you are low on one side, how do you make the actual correction? Drive onto the Anderson Leveling Blocks etc to move into level per the device? Im very new to camping, lol.
Very helpful video, thanks. We had situation where someone retracted the awning without releasing the ‘tilt adjustment’ knob. So the support arm snapped at the top. We got the support arm as a used part (was also told that we had to buy a complete arm assembly!). To replace the support arm we had to remove and reinstall the gas strut. This is where video was helpful.
The paint we put down as a base is cured. The pattern is ink and adheres to the painted base. If you have your pattern rinsing off something did not go right.
So I have bought this transfer paper for hydro dipping on Amazon along with activator, I follow the steps and most of the paint stays on for example my ps5 controller it stays on but some warps or even when I place the film in water is spreads and doesn't return to normal, sorry for all the questions, I just want to customize my controller but I just seem to be failing
I am a teacher, and I am giving you an A+. Let me clarify, not an art teacher. Gen Ed is my domain. However, I am an autodidact and a lifelong learner. You guys get an A+ from this elementary teacher. The rubric gives 1 point for clear instructions, 1 point for presentation, 1 point for language, and 1 point for time management. 5/5 guys, perfect A+!
Before watching your video, I was wondering how it would look if i just cut my original down. After watching your video, i got my answer. You're right to cut it on the back side. If you slip with the knife on the backside, nobody will see. Great video. Thank you, sir, for sharing.
Lost me at Amazon. Don't want knockoff, mine from DeWalt put out way more. Batteries, Amazon was sued over knockoffs. There's a big difference in actually buy batteries from DeWalt vs Amazon.
We felt the same way as did H&G Lifestyles they sent us replacement resin and the new video coming out next week shows a much better result. TDS results were much better.
Yes you could and it would probably be a good idea with some electronics. There are pure sine wave generators on the market which might be better suited if you have a lot of electronics.
@@Jimmy2Tech Thanks for all the great feedback ... much appreciated. I was having trouble ... trouble shooting why my generator was running however nothing working when I plugged into it. Problem solved. Unfortunately, I flipped and switched too many buttons to actually share with everyone which one it was that actually has it back in operation. Likely the breaker or a reset button.
Could somebody explain to me the difference between hydro dipping with film, and hydro dipping with spray paint, and the materials required for each? Do you only use enamel-based sprays for spray painting, and you can't use them for hydrographic film? Do sprays for the film work for spray painting the water? I'm so confused. Any help would be appreciated
Wanted to change out my RV thermostat. Took the old one off and found those troublesome blue and gray wires. There are no matching color letters on the new one. Yikes, what NOW! I was so happy to find your video. Just so happened I was changing out a Coleman Mach to a Honeywell just like you. I was so happy. All done now after finding out I didn't need those wires after all. Thanks for posting 😊
I'd like to install this device in my RV but when I uninstalled the old one, noticed it only has 3 wires, green red & white, and the micro air has 6 wires; With my old thermostat I'm running AC and furnace. Please advise, thanks in advance.
Activating agent directly on the film...? Or the whole bin...? The camera view is blocked in this video, so I do have this question, as I don't want to assume.
I have watched a bunch of these but one thing no one answers. You have to be so careful putting the mirror into the water but then you swish it around, why? Why are you so careful, then swish it? How does the swishing around not wash the film off when you had to be so careful lowering the mirror in the first place? Problem is these videos are all so old no one is paying attention to the comments anymore.
You have to be carful dipping the mirror so you don't get air bubbles under the film. After the film is applied it is ok to swish it around. We swish it around to remove the excess film to the outer edges so when you pull it out it doesn't stick to your part.
Was the left side straight from the spout? or was that thru the H&G softener? I have a Black GX460 so water spots are a nighmare... I was confused as both H&G units looked the same to me... thx
the tank is the same ,but they are different inside the tank. if you wanna wash your car then you need a water deionizer. if you wanna softener the water,then you should choose the water softener. Hopefully it will help you.
This is the first video I've watched of yours and I believe you did a great job friend. My wife just bought one of these for me and I'm looking forward to easier leveling of our class A going forward. We bought an older RV that was set up pretty well but has no leveling equipment so this should help. Thank you for your detailed and professional instructions.
