The differential brace is very nice because the stock bushings tend to tear themselves apart while drifting so this brace distributes the load evenly. pretty essential for dedicated drift cars but not needed.
Do you have a distinct whine coming from the rear as you increase speed. I was thinking solid subframe and differential bushings from SPL will I get this whine. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cOSiVcOsEjU.html The time frame where I hear it start is at 15 seconds in and starts at 30mph. Will I have to deal with this?
Unfortunately, yes. This is strictly a drift car but the 2 times i've driven it on the street are horrible between that and the lightweight flywheel you can't hear yourself think. It's the diff bushings not being able to absorb harmonics from the transmission output shaft & driveshaft. I first thought my trans was going to explode until i realized this is just how its going to be lol.
Just name the video FUCKING DIY! That way I don't waste my time clicking on BS that started as borderline useful and quickly evolved into, not appropriate for my kids to watch! Good Fucking luck with your childish BS...
No that spot is on every 91-98 DE, it’s just a section that provides extra strength for support and is the “data plate” for KA’s, just has the details stamped on the face right there. The KA24E has the data plate in the middle between cyl 2&3 on the same side.
@@daskamu so i just did this last weekend, if you slit the flange you can then bend it up and it will break off, this will give you enough purchase area on the subframe to just push the bushing out whole with a shop press.. eliminating all of the burning and such. the only subframe bushing you will need to actually cut on alot is the rear dif, just be careful so you don't cut into the aluminum and ruin your subframe like this guy did. Also, and another reason to follow my advice, heating up and cooling aluminum will make it brittle, avoid this.
The algorithm brought me here. Great video! Subscribed. I was definitely trying to figure out if there was a manifold gasket placed. 😂😂😂 I’m also restoring a S13, and I also had to remove an alarm system. It was so tedious trying to fix everything.
This one definitely threw me for a loop for a few days which I didn't film haha but that's awesome! I will be completely redoing my other s13 so you might find some relatable stuff in the near future!
Does he know to speak without f*** this and f***ing that. I turned t off after less than a minute because of his dirty mouth. It made not care about his ideas or channel.
@@DillonGuttridge I’ve been watching a lot of “advise” videos and everything in your video is towards the right direction. Sometimes editing is the biggest drag. But to me it seems like the whole video was thought and planned out. Either way you did good 👍🏼
@@Boost-EdAutomotive it really is the biggest drag & realizing while editing that you didn't make a follow up clip to something!! hah but I really do appreciate it, I am working on making it better and more enjoyable to watch as I'm sure you are too! 😁
