Are you for real you took the deck off your Troy built .to charge your mulching blades you don't need to do that. One if you the right tools you would not need to do that.like a deep well socket set and a breaker bar .it would get your blades off with.you are making more work for your self.and use a lawnmower lift to pick up your lawn mower.how sad is that 6:34 Pm Thursday (5/16/24) you buy the right tools to get the job done easily for your self.what a Joke that you are
High school was a difficult time for me I was a foot shorter than the girls 40 lb overweight with crooked yellow teeth and a bad case of gas the ugliest girl in school would not give me the time of day so predictably I played with myself a lot and over time went blind
Hi. That is a great question. I recall having to go in with another classmate who was the official treasurer. We could have put it in both of our names. The seems right. Not sure that helps, but hope it does.
Thanks for this. Our class of 75 will be celebrating our 50th class reunion for the 2024-25 school year culminating in the fall at a homecoming football game and dinner/:dance probably the same weekend. We have also undertaken building a park shelter as a legacy project next year. I have been thinking of what role I should assume, I was president. I would like to make this memorable and a feel good weekend for everyone and remind my classmates of how very important we were in shaping the superb reputation for which our small school is still envied.. As time nears and we are seeing one another more frequently at fundraisers and other events I'm wondering if I should deliver remarks or have a speaker take on that task as an outsider looking in. Any thoughts appreciated.
Just some constructive feedback, I would definitely show every step in the process and how to do it. Most people come to these types of videos for that. I am currently searching on how to change the blades on my mower but I’m already lost by the places where you said you weren’t going to go through every step. I’m going to have to find another video. Anyways, appreciate you posting and good luck to you. Hope you have a good day.
Thanks for the feedback, and I 100% agree, because just a couple of weeks ago, I had to replace a damaged blade and was watching my own video and got frustrated that I didn’t show all the steps. Next time, I either need a cameraman, a tripod, or another hand.
I really appreciate your video. I'm halfway through this pain myself and these instructions are horrible especially considering this thing cost $1000-$1400. They should have marked the pieces with names and written about the little things to do first to avoid the re-doing of steps. Hope you like yours.
I have the same generac I have used it during an ice storm in Michigan. Ran it 4 days to keep freezers my well and furnace and water heater running. It’s noisy but it kept everything running and when you need it it kept me and family in my house…
Jack, you are amazing! I was very pleased to know that my reunion planning team is on the right track. My class has had a reunion every five years since our graduation in 1973! As a creative, I have been called on to do a lot of the decorating, extra detail stuff, and of course now Social Media stuff. One thing I would like to add about the social media is Classmates web site... we have many classmates who are not on Facebook and being able to post a reunion invitation with all the details there has been a big help, especially since they actually send out an electronic invitation to every single person in your class list. Another thing I wanted to address is the classmates who passed away. We wanted to honour them but didn't want to make it maudlin so I'm working on a "Memory Tree" with branches in a pot wrapped with tiny fairy light and will hang the classmates yearbook photo from each branch. And I've also decided to write a little verse to keep things light and make the remembering a happy thing. Also, on our Facebook group page, I have been posting photos from all the past reunions. I have accumulated lots of photos over the years and it's been fun to watch everybody look through the pictures and talk about the memories. The classmates seem to enjoy the throwback pictures! Thanks again for your wonderful video!
Good video for newbies assembling these monsters. And yes, they are extremely heavy. Just to toss some caution to the wind, first run should be around an hour at low load on the generator (like 1000 watts -hair dryer or small space heater). Check the oil (directions may say similar) Only put enough gas in it for 1st run of and hour or so (less than 1 gallon). Let it completely run out of gas until it stops. There should also be a drain screw on the side of the carbureator. Drain any remaing gas out if you do not plan to run it for extended period of time. If you have access to gasoline that does not contain ethanol. use that! May be a bit hard to find depending on locations. If not needed for 6 months or more, put in a small amount of fuel and run it again under a load till the engine quits. Then prep for storage again. Never leave gasoline in the tank for more than a month. Good luck - like ya say. I'd much rather have it and not need it than need it and not have it.
What a BIZARRE channel. You read other people's scripts WHILE YOU'RE CRITIQUING them, instead of reading them first, then going through them w/the viewer and offering "feedback"?
Great video, Jack! We purchased the GP6500 after SNOVID 2021 in February that actually started on Valentine's Day. Your video has been a huge help in getting us set up. Thank you, sir.
@@jackschaberg4970 Yes. I certainly agree. When we built our house in Godley TX we added a transfer switch specifically for our generator. But as you said, we hope we never have to use it. Thanks again for this great video to help me out. I'm not a real handy man. Ha! So keep making great videos to help out guys like me. LOL! We appreciate it.
Eres el único que da una idea en todo RU-vid. Mis CDS tienen más de 10 años y eso no funcionó. 🤗Pero....encontré la solución!!!!!....lo puse en agua caliente (un poco más que tibia)en un plato y/o recipiente que el CD quede bajo agua, un poco calentita, y le puse detergente de lavar platos, lo dejé por media hora. Le pasé suavemente la uña y poco a poco el papel con todo y pega salió. Espero ayudar a los amantes de los CDS, como yo.
Hi there. No, we haven’t had occasion to run it yet. That is a good question, though. I have heard neighbors run theirs in the past, and they are pretty loud, but in an emergency, I guess you can’t blame them. :>)
Hi there. I do believe we set it up that way, although in the long run, I don't think it ended up making that much difference, because there was never much money in the account.
Thanks for the question. I use OBS studio, a free program for screen recording and streaming. After I record my writing session in real time, I put the video into Adobe Premiere, speed it up 5X,, then record the VO commentary, usually at least a couple weeks after the writing took place. You could also use free video editing software. I hope you’re getting something out of these videos.
I have cd ROM for super game 300 my laptop and forth erase the partitions to MTFS and I will add my family pictures into a CD and burn my family picture because I don’t want anyone to reset only ones know how to erase on windows 10 step number one in what’s the label so stupid I need to remove it step number one I will follow your steps removing the label step number to prepare my cd DVD drive step number to ask Windows 10 to force elite the partitions to NTFS and then burn my family pictures into the CDROM
Big giant fail. Your solution is to peel the damn label off? People looking for a method already know this method, which doesnt work if it's stuck on hard so it's incredibly dumb that i spent 2 minutes watching you peel a label.
Great information. I am planning our 50th class reunion to be held July 2022. We have secured a venue and a DJ. Our class was 498 but sadly many have passed away over the years. We are charging $50 per person. I just finished creating a website but one thing I picked up on is that you accepted only checks. The website has the option to pay by credit card but there is also a fee which we would absorb. We may reconsider payment options. Thank you for posting this.
Jack I sure could use your help, I got almost the same scenario as yours ! With Covid it really has put a damper on ours. Out of 160 we got about 40 people ! Please give me a way to contact you !
Just reading this. What exactly is your question? I’ll try to answer it right here n the comments. I’m sure others may have good ideas, too. We’re planning a small reunion and are wondering the same thing.
@@chamorgn it didn’t go ahead 😢 I put the event on eventbrite and it creates a link for you to share to people so they can buy a ticket - but I held off buying actual things for it until closer to the time, it didn’t happen though as not enough tickets sold 😫
Jack, Thanks again for reading this and parsing it out. This script is actually extremely streamlined and moves as quickly as possible while also stopping to give credible time to establish character (and provide some hilarious scenes, which is Stony and Tahoe's main role). The scene with Reuben first tailing Greta is setting up her world and leads up to these two central characters meeting. The Romeo in Joliet (Joliet, not Juliet) dazzles Reuben as to this new world. If you recall the discussion between Venti and Reuben in the police station, Venti warns Reuben that he should get out of the gangster racket. This movie is called Reuben Facey's Big Picture because his character's theme is about feeling that he needs to do his pre-determined part in life (Greta comes along to challenge that, though neither of them know it yet). If you recall, after Harvey ratted out Reuben to the cops and Reuben takes the plea deal, he comes out six months later and is assigned the job to watch Greta and retrieve the money her husband owes Aldine. The script-reader job comes along and Reuben goes along with it because he's bored because he can't go back to his enforcing job for six months. Harvey Hunter has designs on taking over the mob from Aldine, and he doesn't like or trust Reuben. I'm sure you've seen enough movies to know that what a character intends to do often goes sideways. Please take this into account while determining the pacing of the story. Also, there are a ot of characters, but not all of them are even close to having equal weight. Lastly, with regard to my description. I put in what I deem appropriate to get across the flair and meaning of a scene while at the same time standing back and leaving enough space for the actors, director, etc. to do their jobs. For instance, I said that Reuben sits in an aisle seat so he can make a quick exit if need be. This is to inform the actor (whom I hope is Chris Pratt) about the character so he can form a backstory and give a deeper portrayal. And I was told to CAP anything that was important, as well as the first appearance of any character, even ones without speaking parts. The craft of screenwriting would be boring and robotic if everybody wrote the same way. You've also wondered why I left some things out, but those things you mentioned were indeed included. If you read Greta's intro more closely, you'll see she's wearing a ring. Ditto with the scene inside the Cotton Club where Aldine motions for Harvey to get the phone in the hall, and you wondered where Harvey was in relation to Aldine, but they had already sat down at the same table. The story is indeed moving apace. Reuben was assigned to watch Greta, and that's exactly what he's doing. And Harvey, ever so threatened by Aldine's insistence in sticking by Reuben, will continue to pulls strings.