Nice video, but how do you get the piston out?

good video but you could have done this video in about 2 min, move it along buddy, to slow of an explanation

i have the same type of leaf blower the fuel mix is a 50.1 mix so i got mine apart now couse piston rig blew i had a extra motor but i had to change cranks now geting piston arm back on with out bending it is a problem but 50 to 1 is the fuel mix on that one lol robert lay

Great video, thank you for the info 👍

It worked

It's on the gas lid

thank you Ralph, I will try it with my Armada.

It Did not work on QX 56

Thanks for your informative video. I took mine apart and cleaned it but to no avail. It was worth a shot though. I ordered a new one, installed it and now I have all speeds instead of just two; off and full blast.

Nearly all modern 2-cycle engines will specify the oil mix ratio of50:1. That means that you add 2.6 ounces of 2-cycle oil to a gallon of gas. This is adequate to keep the tiny engine cruising along. For simplicity just use an even 3 ounces which gives you a 42.6:1 ratio and will be perfect. Try to buy good quality oil such as Echo Red Armor or other reputable branded product. But most important - ALWAYS add your mix oil to the fuel. Ratios are very simple to calculate: If you want a 40:1 mix of fuel to oil then divide your amount of fuel (128 ounces = 1 gallon U.S.) by 40 and you'd know to use 3.2 ounces of oil. If you have oil and want to know how much gas to buy for your mix then you multiply the amount of oil by the ratio you want to mix. So you have 2 ounces of oil and you want a 40:1 mix ratio: 2oz X 40= 80 ounces of gasoline. So you'd take your can and buy 80 ounces (.625 gallons) of gas to mix with your 2 ounces of oil to give you your desired 40:1 mix ratio.