Question about stereo panning - say you hard pan Loop X to the right and Loop Y to the left, can you set up the LFO to move the two loops back and forth across the stereo field? So, Loop X goes "R -> L -> R -> .." and Loop Y goes "L -> R -> L -> .."?
GFI Systems is the pride of Indonesia. I myself have lived in Bali for 7 years and I have 2 devices from this company. Both are of exceptional sound quality. I communicated via email with the head of the company. This is a very simple and responsive person who helped solve the problem with my Skylar reverb.
GFI Systems is the pride of Indonesia. I myself have lived in Bali for 7 years and I have 2 devices from this company. Both are of exceptional sound quality. I communicated via email with the head of the company. This is a very simple and responsive person who helped solve the problem with my Skylar reverb.
Would have loved a stereo dry output (true bypass if possible ie not through any opamp/converter before it goes to the output) and more inputs wouldn't hurt :P and also, as a foot pedal, touch doesn't suit my back very well...Otherwise dope product !
@@gfisys Thank you so much for the fast reply my friends. Now I can access the pages, but whem I'm on page 2 for example and I press both buttons instead of cycling trough the banks on page 2 it sends me back to bank 1. That way I Can never access page 2 bank 3 for example. Any Ideas?
@@diegonraso we just gave it a try here and everything seems to be working as expected. Try applying the latest update and see if it resolves the issue. If you are still seeing the same behavior send us a video to support@gfisystem.com.
What about the most important thing? Is there a mid-side equalization? A lot of ponts, and elementary needs, to combine properly vocals and guitar through mid-side equalization did not think to do....
This is fantastic! As a bassist, this would immediately have a home on my pedalboard if it had an adjustable HPF/LPF for each Loop. If that's something that can be added via a firmware update & is ever implemented, I'll be first in line!!
@@gfisys - Well, I suppose that just another way to justify up sizing the pedal board and adding a 2 more pedals to perform that function on each Loop 😉
@@LogosWellness true that! Actually you might want to check our Enieqma EQ-it's a full fledged whatever EQ that could function as two EQs at once if you so want👀
Just got the pedal and I am surprised about the obvious missed opportunity there - why isn't there a control mode, where the six parameters of a single effect are controlled by simply turning the six knobs on the pedal? I don't usually tweak two effects at the same time. Tweaking one effect via the combination of turning and twisting the same three knobs is quite frustrating, especially since the knobs don't have pick-up mode and always change to the next value sent by the knob. Am I the only one that finds this odd? Maybe, this could be added via firmware update?
Is there a way to have independent control of the level of each loop? For instance, if I want the mix of loop x to be 60% and loop y to be 85%, is that possible?
You can do that *sort of* by combining the action of the Mix control and Gain control. Set the mix control to the approximate desired ratio, then use the Gain control to fine tune the effective mix ratio. You will have to rely on your hearing cause you won't see the 60% : 85% on the screen.
@@gfisys which mode would that be running in? The 50/50 mode? Maybe someday you could do a firmware update with a mode that gives you full control of each loop from 0%-100% independently, similar to how the L and R mixes can be independent… not sure if that’s possible with the hardware, but at least visually the too slider could be green and the bottom one blue. Thanks for such a quick response! It’s a fantastic pedal; I’m running it with two delay pedals in parallel that don’t have a kill dry, so I’m running them with the mix maxed (100% wet) to have control, and I was curious if I could fine tune the mixes a little more.
@@lachlanplache7148 Yes, using the 'XY mode' and setting the mix at 50:50 will give you the most flexibility. For example, when the mix is at 50:50, and you set the gain of loop X to +6dB and the gain of Loop Y to -6dB, the effective mix ratio becomes 25:100. We will think about the feasibility to add the independent control scheme in future updates. Hardware-wise is not really an issue, the more difficult problem is designing the user interface for this new type of operation, which is basically a line mixer.
@@gfisys well, if you ever do manage to include that type of functionality this pedal would become even more ridiculously capable! I’d absolutely love to see it! Thanks again for being so responsive to these questions, it’s really cool to be able to talk to someone from the company about this stuff. You guys are making fantastic pedals!
