This video just save my a$$ from spending money and headache thank you my brother 🙏 your my hero ❤

This man deserves a medal

You are a genius. I spent over $60 on a brake pedal switch, light bulbs, and fuses trying to track this down. I laughed when I saw that broken plastic piece on your floor, because that's exactly what happened with mine! Thanks for sharing.

My dash lit up like a Christmas tree. Service advanced trac, check brake system, check emergency brake… all in the middle of a 1000m+ road trip. Just found the little bumper on my floor. Hope this fixes it!

Wow just tried this…Truly a great video. Thank you for sharing and saving everyone a ton of money

This video saved me so much money it’s insane. Thank you so much for posting this.

It flipping works!!! I had the silicone spacer on my mat. Sure as hell my brake lights were on. I have a 2014 f350, one owner, me. This happened today 7-9-2024.

You the man

Awesome fix!!! Well done sir!

How did we survive without RU-vid tutorials like this??? lol this is the BEST fix for something that would have easily cost hundreds at a dealership.

Took me a bit to see where you were referring too, but I found the little half a piece of plastic on my floorboard, couldn’t find a magnet, so I got a little plastic washer the size of the one that fell off, super glue and bam! Brakes lights went off, now, I have read the blue switch is a safety switch and could affect the performance of your vehicle. Mine bogged down like it lost power so I guess I’ll eventually have to replace the blue part, but it’s like $60 so we will let it ride for now. Excellent idea, Screw the stealership as they want $300 to fix it. .05 cent washer and $2 super glue and seems good to go. Thank you kind sir

Thank you!!! You just saved me a ton $$$. After viewing your video I went back to the truck and low and behold the gasket was on the floor board. Magnets are working!

It may be good but I can’t tell where this is located.

I like the video that you made in fact, I have the exact problem but how did you get the magnet up in there to start with? Can you help me out?

Wish i saw earlier this would totally work. I ended up super gluing a dime to some felt then put some glue on the other side, rolled up a little tape on index finger, stuck the dime side on my finger, depressed pedal and got it in there kept it there for a bit for the glue to cure. Then slow wiggled my finger to get the tape off. We shall see how permanent it is. If it fails this will work lol

1 Thess. 5:17-"Pray without ceasing." God be glorified! Amen.

Just had the same problem and your video helped me fix it. These are the types of videos I consider valuable.

Amen

Thanks! your video saved me a bunch of cash and aggrivation.. Spot on and to the point. Great job! Also had an extra fridge magnet, thanks BradyW84

You're a genius F those little stops. Even if you have a new one they are a pain to put in. Stopping at home depot in the morning. Thank ya sir

You the man! Thank you soooo much for the help!!

never comment on youtube videos but this was so spot on down to the tiny piece i found on the floorboard. thank you so much!

God Bless you!!! Lights wouldn’t go off, then all kinds of sense lights were going off! Used the exact same magnets you used, cured it all!

Wow - best tip for my truck so far - came home after work and my brake lights we on when I shut down the F250. Found your video, looked on the floorboard, sure enough - there was a plastic disc that fell out of place. Used a magnet. Viola!

Thanks for the video. This was my problem..

Worked like a champ! Thanks for posting this video

My mechanic suggested to put something under the brake to turn off the light

That was totally the issue. Why in the world did the engineers design something this ridiculous, and a little plastic stopper would cause this much headache. Thanks again, Marlon.

Absolutely thank you

Thanks bro you just saved me a big headache and I did use a magnet that I pried off the back of a flashlight until I can get down there and get the right ones but that did work have a great day and thank you for this video

My Brother, noticed this tonight on my F350 and Man bro your solution worked like a charm, I had a perfect magnet for this! Genius, thanks for saving me as well as all these folks!

Thank you very much for sharing this-this is incredibly helpful. Went and bought the magnets after I saw this video. Took me a few seconds to install works like a charm. Thank you for saving me time and money from the dealership

Amazing! Worked like a charm. I had the same piece on my floor mat and the magnets in the garage. Thanks for posting this!

This video is outstanding. The fix was exactly as the video explained. Thanks for the help.

1000% thank you! I'd love to say you saved me some money but I bought two aftermarket and one OEM brake switch before realizng this was all it was. And of course the OEM one (most expensive) has a zero return policy. None-the-less, I appreciate the video man. Appreciate you for making it. Thank you.

Yassss 🙌🏾🙌🏾🙌🏾🙌🏾

Got the same problem but also Truck will not accelerate. Then service brake light warning nd advance track all come on. I hqve the magnets. Just need to install. Will update when complete.

Was wondering what this was on my floor mat, an identical piece to yours, thank you for sharing this, as mine started yesterday.

Great info! Just happened to me yesterday, everything else I read said the switch was most likely bad. When going to look at the switch I found the rubber stopper laying on the floorboard, just the clip part of it had broken so I was able to super glue the rubber button back on.

All the rest of the comments say this already: you rock! I had no idea where to start, but sure enough, your video was top result. And the little piece of plastic was on the floor mat. Top marks, my friend.

You sir , are a genius! Thanks for the help!

Boom...Well done sir. Hats off.

You saved me. Thanks for the how to

Friggin brilliant. I had the same problem and found the exact same piece of plastic on my floorboard.

saved me a trip to the mechanic!!!

Thank you man! I was wondering why my brake lights wouldn’t go off. Saw a piece of plastic on the floor and thought it was trash. RU-vidd this and found the magnet at Home Depot.

thanks this video helped with my same problem

This video is a 10/10. Internet hall of fame. Thank you my man for saving who knows how much headache and money at the dealership. My 2015 F-250 had this exact problem. A magnet sacrificed from the kitchen fridge saved the day, and my batteries!

I just experienced this today. I found your video and fixed the truck in about five minutes. You sir, are the best! I truly appreciate you taking the time to do the video.

You are "the man" !!! Saved me $$$$$ Thank you sir.