Тёмный
Jake Smith
Jake Smith
Jake Smith
Подписаться
Комментарии
@greg9960200505
@greg9960200505 11 дней назад
I've had 2 of these cars and have not been able to figure it out. Just bought my 3rd, and this video helped me get my horn working!!! Thanks a ton!
@jam3498
@jam3498 11 месяцев назад
Thanks. My cup holder cover was stuck so removing it helped fix it
@jakesmith8208
@jakesmith8208 11 месяцев назад
Glad to hear you got it fixed
@PursuitMode2011
@PursuitMode2011 Год назад
Great catch and tutorial. Nice work!
@javierc3218
@javierc3218 2 года назад
This was very helpful my man thankssss
@JorgeFabrizio
@JorgeFabrizio 2 года назад
So you connected the 12v tan to the ground tan? dealing with this in a 2015 and found 3 cut tans somehow. I'll know what is what when I bust out the multimeter.
@jakesmith8208
@jakesmith8208 2 года назад
Yea, so the black tan was wired into the 12v system and the tan the black connected to went to complete the circuit for their sirens. But the original circuit was ground.
@JorgeFabrizio
@JorgeFabrizio 2 года назад
@@jakesmith8208 I appreciate the response. I found the 12 volt and the trigger but unfortunately it looks like they did a lot more cuts under the hood. This is gonna be a longer project than expected 🤣
@JorgeFabrizio
@JorgeFabrizio 2 года назад
@@jakesmith8208 and for bonus points the original horn was disconnected. Still running it down though
@Yagirl_clare
@Yagirl_clare 2 года назад
i just bought a chevy impala police edition and i had no idea how to even fix the horn lol thanks sooo much for your info 🙏❤
@WolfODonne11
@WolfODonne11 2 года назад
Thank you so much I looked in the manual for this car and it pointed out that the wiring disconnect for the horn was in that rat's nest area but it also failed to mention what color the wires are so this video 100% reduced the time it would have taken me to figure that out
@jaguarJS
@jaguarJS 2 года назад
Thanks for taking the time to do this. It’s very helpful.
@jaketopsy9112
@jaketopsy9112 3 года назад
Thanks 4 video; gave me a place 2 start!! Same problem, same hack work by mechanics before auction!!
@jakesmith8208
@jakesmith8208 3 года назад
Hopefully that helps you
@jeremybaker195
@jeremybaker195 3 года назад
All I see is a camera waving around focusing on nothing
@taylor_4582
@taylor_4582 3 года назад
8 years later and this vid still helps people that own this car. Thx for the info dawg
@jakesmith8208
@jakesmith8208 3 года назад
No problem. If you need any other help with it. Lmk
@MichaelJohnson-nk9yp
@MichaelJohnson-nk9yp 3 года назад
Thank you very much. Because of your help the car now had a horn.
@jakesmith8208
@jakesmith8208 3 года назад
Glad to hear. If you have any other issues with the Impala, let me know
@tisukiyomi1734
@tisukiyomi1734 5 лет назад
Shoot I am trying how to change the shift nob, because it doesn't want to screw off or pop out
@jakesmith8208
@jakesmith8208 5 лет назад
Auto or manual
@jakesmith8208
@jakesmith8208 5 лет назад
If automatic, there is a small screw on the front of the knob you'll need to remove with a Philip's.
@tisukiyomi1734
@tisukiyomi1734 5 лет назад
@@jakesmith8208 Auto
@tisukiyomi1734
@tisukiyomi1734 5 лет назад
O gosh I am legally blind lol, now it does have that side trigger that I have to press to change to R,N,D. I can't change just by the brake. So that's why I was questioning if possible to take off because I wanted more customization.
@jakesmith8208
@jakesmith8208 5 лет назад
@@tisukiyomi1734 I'm having a hard time understanding what you need to remove or replace
@FR-vc1lb
@FR-vc1lb 6 лет назад
How much does it cost to place a bigger engine I have a straight 6 engine.... 77f150 ?
@77marioland
@77marioland 5 лет назад
If there was aftermarket support for that I6 it would be such a nice option. Engine control, EFI, turbo... 90's 300ci have an ok exhaust header and have EFI intakes to go on the same block. If I knew then what I know now... it would be a cheap way to have fun. The problem I had that was my only vehicle and by the time I could do something the body was gone. My I6 was over 200k miles and had no problems.
@404BOOMER
@404BOOMER 6 лет назад
I have an F250 77 same color that I bought new in 77. Will be changing to 390fe soon and would like to change to manual trans from my c6. Hey you forgot to take the empty cans out of the bed for the video didn't you?
@jakesmith8208
@jakesmith8208 6 лет назад
steve elliot the 390 is a monster, it's what's in her currently. and the cans are custom 😂 only issue I kept having was headers cooking the starts quickly. had to manufacture a heat shield for it
@404BOOMER
@404BOOMER 6 лет назад
Thanks, I will keep that in mind.
@404BOOMER
@404BOOMER 6 лет назад
How about fender well headers which is what I have on my 351M now?
@jakesmith8208
@jakesmith8208 6 лет назад
steve elliot not sure, could be worth a shot
@Collasseum
@Collasseum 6 лет назад
thanks man!
@bohoward6991
@bohoward6991 7 лет назад
Awesome,, just plain awesome
@NeoJSsk
@NeoJSsk 8 лет назад
Thanks !
@01ciruz
@01ciruz 9 лет назад
how do you remove the dash where the speedometer is, the same way?
@MutationD
@MutationD 10 лет назад
how did you special order the different colours?
@NeoJSsk
@NeoJSsk 8 лет назад
You just paint it your self , if your not sure about color do it with plasti dip removable paint
@TheRandomTechy
@TheRandomTechy 10 лет назад
Can you make a video on how to remove the door panels, door handles, the entire dash, etc.?
@jakesmith8208
@jakesmith8208 8 лет назад
sorry this comment Is a little late.. but to undo the door panels there are clips all around the door panel as well as a screw in the center of the door pull handle. let me know if you have any questions
@snacks604
@snacks604 11 лет назад
THANKKKKKKKKKKKKKKKKKK YOU SOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO MUCHHHHHHHHHHHHHHHHHHHHHHHHHH