correct me if I am wrong po, bale ang ginawa nyo po ba ay connect yung 2 wires(gray and white/black) then make sure na fused at lagyan ng relay po sa relay 4?
I did the same DIY on my Crysta 2017 unfortunately did not work, went to the car accessories shop and had to do additional wiring from the clock spring. Because by default there was no steering wheel audio control wiring. But it took a long time to figure out the connections. Finally it worked.
You can check what I did on this video. 1. Check if there is already a foglamp harness. 2. Check for fog lamp fuse 3. Check for wires for the fog lamp switch(same location on this video). 4. Check for fog lamp relay location. Most car brands usually use the same wiring diagram with previous generation or other platform(e.g. in toyotas same with innova vios hilux etc)
Wala po. Pero na mention na din nung 1 viewer yan dun sa 1 video ko. Meron nga indicator dun sa stock gauge. Mukhang kailangan lang baklasin then mag solder ng additional leds.
@Art Theseven gusto ko din sana gamitin ang provision ng toyota avanza 2021 kaso lang iba yung connections nya sa innova. Ok naman yung wiring harness ng DLAA kaso pang RHD, inextend ko lang yung wire para abot sa driver side. Pero thanks for sharing po kung paano nyo nagamit yung provision ng innova.
@@dino_russ Kung may nakagawa na sa youtube or sa fb groups ng avanza then possible na madali lang. Diba si avanza is daihatsu parang wigo? Kung may naka abang na harness na, itrace mo na lang yung kulang na items Fuse Relay Switch Foglamp Then it should work the same.
@@arttheseven5526 may fuse na po sya and socket for relay at may foglamps na din ako kaso sobrang hirap po kasi hanapin, combined po yung wire, iisang harness sa headlight at wiper switch hindi sya kagaya ng innova na may sariling harness ang headlight at wiper switch kaya no choice ako kungdi gamitin yung harness ng DLAA.
@@dino_russ ah bale yung switch na lang issue. Ano ba "orig" na fog switch ng avanza(yung mga nasa top of the line)? Kasama sa HL stalk/switch or separate?
Try mo ser dito halos same naman sila ng diagram ni innova. Based diyan sa link nandun sa fusebox sa may accelerator pedal. "Ign no1" fuse fuseandrelay.com/toyota/hilux-8g-fortuner.html
Thank you sa tutorial mo sir! Was able to use the stock foglight harness dahil sainyo. Tho different lang yung naging approach natin kasi gumawa nlng ako ng sariling relay using bosch 12v relay then nag kabit ako ng male terminal dun sa stock relay socket for the fog light. For now ang trigger lang niya muna is yung parklight switch . Planning to add a switch soon.
@@josiahsantiago2558 meron nga! Kala ko sa mga higher model E/G/V lang yun meron. Duda ko blangko lang socket or bulb niyan. Try ko nga humanap ng videos or pics ng gauge.
@@arttheseven5526 feel ko may bulb yan sir hehe yung tropa ko kasi nagkabit ng rear foglight sa hilux niyan then napagana yung sa gauge niya. Update mo ko sir pag nakahanap ka haha nag hahanap din ako e
My 2570s are not actually doing paper jam but the printer always stops halfway after feeding paper. Always stop at the middle of paper and it's not printing. But when you try to test print it's working. Idk exactly what could be the problem. I disassemble the printer and check the one like you fix and it's all fine It's not broken. What do u think? Help me tnx
I have experienced that on my desktop PC and 2570s. And also in my work before. I believe that is an issue with the PC not the printer mostly happens when the pdf file is too large and there are lots of pages being printed. You can try one of these. 1. Probably not enough RAM. Usually 8gb is not enough nowadays. Try upgrading to 16gb+. 2. Try restarting the printer spooler. Press "windows" key then type on the search bar "services" without quotes. Look for "Printer Spooler" then right click then restart. 3. Try printing using another PC or laptop but same printer.
Yun pa din yung orig na fuse na nakakabit. Mumurahin lang na yellow green led fog bulb nabili ko online. For test purposes lang talaga. Yung may ari kasi ayaw gumastos hehe
I think it should work the same. Assuming you have the complete sensors/motors etc. You can check alchemist's complete conversion including the heater core. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UCDJaJk19kE.html
Boss san po location nyo innova j ren sakin bomili ako ng botton kaso yong clack spring walang sakit balak kosana bilihan ng touchscreen kong malapit po sana location nyo sayo kona ipakabit
Thank you so much to this tutorial, I was able to fix my similar problem. Btw, you only need to disconnect/cut one of these two cables and that is the one WITH pin on the other side from the car. The one with a blank don't need to be removed as it won't contact to anything upon connection. Hope this helps other fellow DIYers.
@@arttheseven5526 Apparently the high temperature would be able to break down/melt the dirt without having to even use chemicals. Do update us if or when you get a chance to test it out, thanks so much for sharing the review.
@@catherinetan1342 but that was the issue I experienced when testing it. The "steam" coming from this unit doesn't feel hot enough like a steam from a boiling water.
@@arttheseven5526 For the reflective surface (metal) you have to paint it black or use some black tape/sticker/decal. And shorten the measure distance, you measure from too far.
@@maatszjack are you referring to the hole on the side of the climate control unit? If yes, the hole on the side of the dcc unit is connected to a tube infront of the white air duct. I think it is for the air temp sensor inside the dcc unit.
@@maatszjack this was 3 years ago already. But if you need a wiring diagram for the dcc, i can email it to you. I got the diagram from club4g(thai forum).
