I’m sorry, I couldn’t watch because I’m one of those people that can’t pick out your voice from the music. I can only hear the music which is louder than your voice.
Naw bro piss on them negative nancies if that beautiful voice you’re listening to aint good by them a-holes they thats good shit your listeng to is you not them, theyprobably like country rap but do you brother! You Do You !
Bro get to how u fix it I’m 3 minutes in and u literally have just blabbered about nothing so far… some ppl just love talking for no reason just to waste ppls time
I explained within the first minute that these are direct replacements for current bulbs. Watch the video again or just unplug old bulbs and plug in new one, no mod required. Good luck.
I have both the 271 and 281 and have run into this phenomenon on both. I've found it to be a fail-safe when the transceivers are starving for power. Why it works on a 145 Mhz repeater and drops on a 147 Mhz repeater is likely a difference in current draw between that wide a range in TX frequencies. Draws more in the 147 Mhz range. I'm willing to bet that if you use low power on that 147 Mhz repeater, it won't drop out. If your power supply has variable voltage, I'd try turning it up if there's room to do so (but not above 14.5v). That way, the voltage drop when transmitting won't fall under that threshold trip-out point. The other more technical option is to replace the power wire with thicker gauge wire to help prevent as much of a voltage drop while transmitting.
Thanks for the thoughts and ideas. I decided to set transmitter on low power and that seems to have fixed my problem. Thanks again for the great suggestions. 73s
Have had a hog 30 for years now. Like the tone and convenience of being able to play my electric anywhere. Downside is the batteries. Maintenance is difficult for me due to shouldn't store with the batteries partly discharged and shouldn't charge more than 6 hours. I'm not senile but have trouble remembering to charge them and more trouble remembering to not overcharge. Also not supposed to plug in while using. When the second set of batteries were failing I just started pluggin it in when playing due to the expense but that defeats the true benefit of the amp. Contacted pignose to see if they have upgraded the battery system and pointed out they are very expensive. They did not bother to reply. Was at the local big box store yesterday. Wasn't looking but display of 6V 4ah lead acid batteries with the same design. Price was just over $10 each. Bought those and an electrical in line timer to shut off charging after 6 hours.
According to what you say several times is how to prevent the LOCK screen blurry, but what you are showing is how to prevent the HOME screen from being blurry, not the LOCK sceen.
Hi, your video was very helpful, I have the same layout as you do. Laptop, Monitor (which is actually a Graphic Design Tablet) and a TV (which is a TV but only used as monitor) I am able to get all three devices to open as you show. I will use your terminology for clarity. I use the Laptop and TV together all the time (mostly for the Internet). When I use the Monitor I also need to use the Laptop and TV. I turn the Monitor on and off several times a day, an leave the Laptop and TV on. I never use the Monitor without the Laptop and TV. The problem is when turning on all the devices, they have to be disconnected from the splitter before they work. Tried turning of the devices in reverse order no luck. Any thoughts? Thanks for getting me this far. Patrick
