Absolutely wonderful! I have watched countless videos thinking I would get my solution and everybody wants to show me the exact same thing which doesn’t apply to me. Thank you so much.

Great video just an idea maybe you could use lock thread glue for those lose nuts ,that might help you in the long run

Hi, 👋 I have this same "OVEN" , stove, grill, which can be raised off of the ground and sat upon a circle of large stones or over a dual fire hole. Don't insert the so called ash tray. Now you can use the oven and place either the ash tray or grill on top to cook other things simultaneously. I like using a few charcoals for a longer burn outside or maybe a sterno if I'm in my tent. This oven can also be used as a fireplace when used with other attachments.

Thought it was 4.5

Damn, would you lose the music.

Its a 20 Amp Charge controller by the way ;-) Just ordered mine from Renogy, its on the way. Not crazy about the voyager pwm, may upgrade it to a 20 amp Victron MPPT. Although I do like the weather proof of the renogy voyager. I may just try it out for a season before upgrading the charge controller. I would have to keep the Victron out of the weather. I picked up 20 feet renogy extension 10 awg cable with the order.

My blue rhino tank valve will not turn. You can wiggle it a tiny bit to the left and right, but that's it. I released the pressure like in your video, but the valve still won't turn on. Any suggestions? Does that mean it's empty?

The music is a bit much. I want to hear you, not the music.

Propane can really get gummed up under certain condiitons. Don't let your pressurized hose be in the sun or get hot, the propane turns to goop. Turn the tank off first and burn off the contents of the hose to prevent issues. You can blitz clean your hose by using something like a small hex key to poke down the check valve and clear the goop if goop is already present. That same goop will ruin your pressure valve and that is not as easy to clear: buy a new pressure regulator bummer is yours.

Thanks for showing the temp differential. Too many reviews don't have that, and it matters--A LOT.

The 100 watt suitcase charged my lifepo4 100ah 12v battery in the florida sun took a week to charge to 50%. Not great

First try cooling the tank, often it's just an excess pressure caused by the tank and valve heating up.

Hi, Just purchased my solar renogy 200watt solar panel kit, tha one with tha alligator clips Y Duz tha screen say error

I sure hope you guys are ok. Your video on building that battery box as a companion to the Renogy suitcase helped me

Excellent video and exactly what I was looking for. I hope you and yours are doing well.

Make a stick bag good video 😁

Beautiful Detailed Presentation. Thank you 🙏 Brother. I just ordered 2 of these. Much better than all the cloth portable panels. IMO. Buy one ☝️ time for a lifetime. 🍻

I did that and the propane tank is still not working.

IDEA : Some people make a metal stand over the heat and place quiet woodstove fans on it. I use these whisper quiet wood stove fans on my gas fireplace shelf top.

NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO! Never use Teflon tape on FLARE FITTINGS. Sorry, but it doesn't take long to search a little to see this is a no-no. The FLARE FITTING is a sufficient seal, with appropriate torque.

That is not a pressure relief valve. That is actually connected to a dip tube known as a spitter. It is used in filling tanks. When the tank is roughly 80 percent full propane liquid will come out an opening 90 degrees in front of the screw.

The tape is not needed on flare fittings.

Wow!

Can you change the filter on the wave 3 heater?

I will probably forget to get back to ya but hopefully this works, I tried different things but not the little valve thing. thanks to you and two other content creators whom gave this advise .. just tree guy looking to make a home repair ..

Thanks for the tip. I loosen the screw to release and then tighten it back up. Did this in combination to cleaning the Mr. Heater flame outlet orifice to get it working again.

Bro thank you!

Great info.

The tank is a closed system. Going over a pass which changes the atmospheric pressure OUTSIDE the tank will have ZERO effect on the propane tank pressure INSIDE the tank. Temperature is the only variable that will affect the vapor pressure of the propane in the head space of the tank. Higher temperatures will increase the propane vapor pressure inside the tank.

That most likely won't actually be the fix to the problem. If you close the valve then open it slowly it will be more likely to fix your issue.

I can't get mine to light. I do not have the elbow but the hose fits on the attachment perfectly. I have not used the tape yet. I am just trying to test it and get it lit and its not working at all

Great stuff mate and thanks for the tips. I plan to use this for wild camps when Im taking a vehicle. If Im taking a vehicle I will be taking a skillet. Now Im just looking around my apartment, clutching a pair of tin snips, trying to find something to make two notched pot raisers with haha.

Teflon tape is for pipes that rely on the threads for sealing, those propane heaters only use threads to lock o ring in place.❤

Fixed!! Thanks!

And, if open tank valve too quick and pressure drops too fast for too long (like if hose is long or burners are alrrady open) a ball bearing is forced by flow into tank valve and stays thus dropping flow to a trickle. Closse of all and wait and then open tank slow w burner closed... i was stumped like an idiot till i realized yes i kept dropping the pressur too fast and tank ball bearing was jamming into valve and it sticks til its unstuck... So this is often the damn problem till realize this issue and avoid it!!!

That didn't work at all

Thank you brother

Thank you but it didn't work😟

Blue Van Dan use to use a little buddy heater and usually just the pilot light on was enough to keep it warm. Seems like a wave 3 is too much heat for a Van. Does it have a thermostat built in?

On Amazon Wave 3 is $367 and Wave 6 is $498. I just bought a new Mr Heater Big Buddy for $99.99 at Bimart. Works great in my living room.

That is a bleeder screw it will spray liquid propane out when your tank is 80% full that's what it's for it only should be opened when tank is being filled I am a propane tech and work with it every day

Excellent review. How much space is needed infront and to ceiling? TIA.

The two wrenches is to back up what you are tightening so you don’t tighten it to tight into the heater,also I don’t use Teflon tape when the seal point is other than the threads like flared fittings

Good tip, but you failed to explain why/how this happens internally! I know why, but some might not

The side handles are a problem and the front lock is too

Yes I enjoy using mine

Now....now, show the video where you converted this Renogy 200watt 12v setup to a 24v charging system!

Thank you! That worked for me!

Do you have the valve open or closed?

Thank you so much for your video. I was in the mountains and my propane stopped working and therefore I couldn’t use my fridge or stove or furnace. Once I released the pressure, it worked again!! I’m so grateful!! Thanks again!!