thanks! but do you know if i can still have a second hdd, I have one SDD and one HDD, but i want to add a graphics card, I dont care if it doesnt fit inside.
Help! I have the m910q, it doesn't have the pci express slot, but the motherboard has the space for it, is it possible to solder the slot? I searched a lot and didn't find anyone who could help! thanks.
Hi, I'm using M910X and I bought the same card K620. After putting the card in the pcie slot, windows does not detect the card in the device manager. I am wondering if you faced this problem during your set up and if there is any way to solve this problem.
Hey man. I went with a Yeston 1650 lp. Total system power from what I've seen never gets much over 100 watts. The problem I'm trying to overcome at the moment is the CPU does not stay in turbo and throttles in and out of it's TDP. If the CPU would remain 35 watts all the time the GPU would be able to get 100% usage all the time.
@@maximilianoalarcon6233 no and yes. I couldn't figure out how to lock it in turbo boost. But what I did do was go from a i5 to a i7. Double the threads is much better now.
@@terorwolfable yup. I upgraded to the 1650 now. But I think I gotta upgrade to a bigger PSU, since the whole system turns off under full load. Also now I'm at a CPU bottleneck. Previous to the 1650 I was running a rx640. That thing would ramp up into the 90*s Celsius.
Trước đây chỉ add được 1 esim thôi bạn a. Giờ có thể add được 2 esim khi iphone 14 ra bản mỹ ko có khe sim vật ly. Nhưng nhà mạng đã khoá cách chuyển sim như mình làm video trước kia rồi 😢
Cho e hỏi khi dùng esim mà bị mất máy thì khi ra quầy làm lại sim thì dễ k ạ vì mình k còn gì để làm bằng chứng là sim của mình,sim vật lí cũng vứt đi lâu rồi
Sim được đăng ký bằng chưng minh thư mà bạn. Bạn muốn chuyển từ sim vât lý sang esim giờ phai cần cmt nhá. Nên mỗi khi làm lai cần mang cmt ra điểm giao dịch la dc
khoang nhỏ lắp hdd hoặc card low profile, nếu kéo riser ra thì bạn có thể thử xem đặt vừa có bị kick ko thôi, còn con 1650 kia mình sợ nguồn ko kéo được
bạn cứ làm giống hệt các thứ tự và vị trí lỗ cắm theo dây gốc thôi. Con mod 28 sang 24 thi mình cung ko rõ. Cái này ko sáng tạo dc. Dễ chập hỏng linh kiện ^^