Nice video I’m wanting to create a enclosed bumper for a integra but haven’t came across anyone with one. Also sorry for your loss may the rest in paradise
You think the blox competition series are good for the street it’s like the one step down from that one with 12k front 10k rear? I heard people say they are good but trying to get more opinions on it
The video I’ve been looking for! Only thing is, my fuel pressure regulator has a vacuum line going to the intake mani, *where you hooked up the intake line on the Mac to the intake manifold*. Where else would I be able to run my intake line from the mac to?
What a junk shop, taking away material on the rod cap like they did are a big no, the extra meat there are to strengthen it, it should be remover on the edges/side where the rodbolts go, not on the cap!
The first set of trailings arms came of a DA integra. You can tell by the 3rd oval hole by where the ebrake goes. you can use these bushings with the DA trailing arm but must use the bushing ring. They go inside the ring. The holes are bigger on the DA arms thats why these didnt fit.
great video Iam interested in a similar set up but was wondering is is this suitable for a street driven car or just a track car with the epoxy will it have cooling problems ?
Can you tell me how you prepped and painted the trailing arms? I saw your video where you cleaned it but not how you prepped and painted. And what paint did you use
Just painted my 1980 Mercury Capri. Had some orange peel which I dont mind. The areas that bother me are where I had the air too high up and left the clear coat cloudy. Hoping this does the trick. I just want a 20 foot paint job :)
@@bubbajulian7294 yes very legit or you can message Chris boyette on Facebook and buy from him directly the stuff works we plan to turn this one up 700whp
What are these like to drive around town on?!? About to order a set and hoping it won’t be too miserable if a ride when I have to drive it once in a while
Sorry for the late reply, things have been crazy I wouldn't really recommend these bad boys for street driving the 18k rear spring are really a drag car oriented setup very unforgiving on the street
What speed you use to get rid of heavy orange peel I think have the 2,000 grit Car Pro Denim pad I have a rotary but rather use a da to get rid of the orange peel.
You need to move you tps back and forth untell you reach you target it can be a bit tricky to do yourself it might be easier if you have a friend move slide the tps back and forth will you do the readings in the car
Iv never port matched a throttle body before this is gonna be my first time. So far the easiest way iv seen is to attach a flap disk on a drill. Do you think this would be a good way of doing it ?
