Welcome to my channel! Here I post a lot of amazing, Amazon products, deals, and finds. Be sure to subscribe so you don’t miss out on the next amazing product.
@@kennethfuquaii469 you can but may need to allow the compressor to refill multiple times. The recommend specs of the air flow is 90-120 psi with a cfm of 6.5
I found it didn't do well with other bubble variants. I want to use a medium bubble and they are OK but it doesn't fill them up as much as it should in my opinion.
@@HomegrownReview There is only one knob for "fan control" and the fan needs to be on full blast, but it needs to spin slower I guess to work better. I tried to manually hold the roller but it doesn't seem to work.
Does the handle bar have to stay down if wanting to do walking mode only? also is there a setting for walking (slowly) at a very slow pace without it speeding up?
Use a scale and weigh the ice divided by half (slightly more) that’s how much syrup you should add to the dish!!! if you add too much syrup, like equal parts - one to one, then it becomes a Slurpee 😄🙈!!!!
Nice review! I reviewed the same product LOL All your stakes looked nice, I had some crooked ones. I also liked how you didn't intertwine the stake. It looks very firm.
Got a 24 footer by Vevor, have u figured out how to get the creases out of the screen where it was folded, mine looks like urs with the creases in it and it drives me nuts trying to watch a movie and during a part thats light in the movie the creases show horribly. Ive had a different type 14 foot projector for 10 years that the screen snaps on the inflatable stand instead of Velcro with a PVC type screen and creases came out quickly on its own but this screen is more of a spandex type feel and ive had it for 2 months and had it inflated 10 times now and the creases are still there pretty bad
Can I use my old A1407 apple monitor to it? I have two of them and can use either one, one is Thunderbolt Display through usb c adapter and one is display port with a usb c adapter. Neither have a cdmi cable or port so would I be able to use these monitors with this dock?
Did you try removing the lug nut with a tire iron? Does the tool make it too tight? Can you easily stop it before it's too tight? Otherwise, without a breaker bar, you can be stuck on the side of the road not being able to get it loose. Unless you carry your air compressor and this tool of course!
@@Bay2Atl oh dang. Glad they’re replacing it though! Fun scooter for sure. No issues with mine if it makes you feel any better. I’ve taken it on some mt bike pump track trails. I’ve definitely been rough with it.
No audio on what it sounds like with a good sound system and not hearing the blower over it, for proof of statement? I imagine you can and will hear that air compressor no matter what your sound system sounds like... movies get quiet at parts, sometimes even silent... Hard pass.
@@jbkibs we use a single Bluetooth speaker and works just fine. Do movies regularly. You can hear the blower, but that will be the same with any inflatable screen. If you had a “good” sound system then you probably wouldn’t hear it at all. 👍
Well you also have to remember you aren’t sitting 5 feet away from this thing. So I’m sure it is noticeable at quiet parts but not obtrusive. Another guy did a test and the 350w was 80 db at 3 feet and the 750w was 86 at 3 feet.
I have this watch (IDW19, gets branded differently by multiple vendors). It is such an improvement in the "cheap" range over offerings 4 years ago -- all the features you're likely to use and 7x better battery than the Apple watch at 1/10 the price. Just like with wireless earbuds, you're getting 5-10x value at 10-20% of the price of the same high cost project a few years ago. If it doesn't break, totally satisfied.
I want to try a cheaper soap bar for my very 1st use. These are about $20 where i am and i know i can get a different brand for like 7. Obviously $20 is not expensive, but I have a tendency to buy things, not use them and they just collect dust😢... The whole reason why I'm trying to buy soap bars in the first place is to reduce my plastic waste. 🤷♀️
