Always be kind, always be humble. Hi, my name is Dani, I'm from the Gold Coast Australia and am just one of the many DIY Mumma bears in the world today. Here I makeover old furniture that is unwanted and worn and give them a beautiful new lease on life. I'll also throw in some sewing and other projects that might pop up around the home. I hope you get some inspiration, ideas and entertainment from my channel. For every person who watches my videos, thank you...it means the world xo
Thanks so much for this video! Saved me lots of time trying to figure out the settings! A suggestion though: you might want to try to peel the mat away from the material instead of peeling the material off the mat. It usually ends up tearing your material less and is easier to do, especially with the strong grip mat. There are lots of videos showing how to do this. The basic idea is to curl the mat as you remove the material and it just comes away almost on its own. Hope that helps!
@@Poikka65 I’ve only used this once more to see what it would be like. Recently I’ve used Mint by Michelle and that’s also a lovely one step paint. Making this paint was more value for money I guess and more budget friendly 🌸💕
Hi...i think, you definitely need to use degreaser, or sand it,to create a ruf service, so the glue sticks better. Or use double sided tape,if you want to hold it temporary. Lots of afford, but it looks nice.😉
@@irmaklimovicova630 Yes that PVA definitely was not going to work. The Maxi Nails definitely did the trick😊. I only use the PVA for my textured wallpaper or decoupage I never actually use it for wood🌸Thank you for watching💕
The new shape looks great with the shape of the drawers. I liked the before too but these suits it better, I think. Also, I bet the mandalas were so hard to take photos of without them looking like they were wonky, that's tough to do.
They did look wonky and that may have been the issue with selling this. The other handles would never have been my first choice but they weren’t too bad I suppose. I love the dowel handles though and I’ll definitely be making more and experiment with different materials🌸😊
Thanks for this video. I was searching for ideas on how to construct a board on our kitchen window sloped sill. This has given me suggestions and confidence on my project. I am thinking that Liquid Nails might be a good strong substitute for drilling into the sill bricks, which I know are a bit brittle. I also like the use of pine and staining it to match existing area. Obie
Thank you😊It was a bit of trial and error and a fluke on our behalf😆but I absolutely love the result. It’s transformed the space and is now really pretty. Yes liquid nails is a great idea. Had we known what we were doing beforehand we may have done that too😊 Good luck with yours🌸
That’s actually a good idea I never thought of that. It is ultra tough stuff though and wears extremely well on tiles. It is still wearing well and I’m so pleased with it💕🌸Thank you for watching😊
My Painted Wicker Two Years Later | Maintaining Painted Wicker Furniture | Plastic Wicker Makeover: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ti8fQyCCxk0.html
Thanks for watching😊it is White Knight tile and laminate paint Renew and primer. I never had mine tinted so it is just plain white. I’m putting a video up today about its progress because it’s been two years since I painted it so watch out for that!😊🌸 My Painted Wicker Two Years Later | Maintaining Painted Wicker Furniture | Plastic Wicker Makeover: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ti8fQyCCxk0.html
Can you add new material without a subscription? It doesn’t come up for mine? Thank you! I just tried to use the same material and no bueno’- never mind it’s different on iPad , it’s just the add sign in green for anyone else like me lol
Thanks for watching😊🌸we don’t have a subscription to cricut access where you can get free images and fonts and projects either but we can still add new material. If you go into browse materials and scroll down and click on material settings and at the bottom of that click on add new material and you should be able to input your settings. I’m not sure why it won’t let you🌸
Im in the middle of assembling a 6 meter ABSCO shed. Both the paper and online videos are confusing in their own way. Don't know how I'm going to lift and install two 6 meter roof panels. Thanks for your video
Thanks for watching😊 it was a process that’s for sure. I don’t think we’d do it again but it was all ok in the end it’s a great little shed. Good luck with yours🌸
Congratulations 👏 you have repurposed something for organizing. I love when we are able to reorganize with something we already have. Less waste in our landfills and more money saved for enjoyable times in the future. 😉
Impressive make over 😍 didnt even know you could paint over laminate. I started with your kmart jungle wall paper video because im going to use some kmart wallpaper on a laminate loft bed tomorrow. Im now 3 videos in 😂
@@ourhumblehomediy I have an IKEA L shape sofa bed and it’s too expensive to buy covers for it. I’m thinking I’ll do what you did with the drop cloth. How many did you end up using on each couch including the cushions on the back? Also did you bleach the drop cloth and over time is it holding up? Where did you get the material? I’m in Sydney
@@nicolestewart For these I bought the drop cloth sheets from Aldi. For one slipcover including the cushions covers I needed two packets but I only used about one and a half. I would say if you are buying fabric you would need about 10 meters at 140 to 150 cms wide. That’s just this sofa though I couldn’t say how much you’d need although if it’s a two seater it should be around the same😊🌸
@@nicolestewart the problem with Aldi is they don’t stock the same thing all the time but if you can’t find them there they do sell them at Bunnings. You might just have to double check their sizes😊🌸
I’m having a nightmare this is happening to me but even worse is that the sides have shrunk so I’ve got a tiny gap in between 😢 I was wondering about putting a layer of watered down pva over it ? 🤷♀️
I think you did a fabulous job everything looks real to me 💁🏼♀️ I’m looking for a free app to virtually stage my furniture if anyone knows of one. I have used Canva for years but I only use the free edition.
An all in one paint is so convenient. 5 coats feels like a lot but it’s not when you take that into account. The drawers look so much prettier now too.
Absolutely gorgeous, what a transformation you have done an amazing job and I will be starting my project when the weather get better.. thank you for sharing look forward to watching your other videos, Love from Liverpool, UK ❤
Hi there! Thank you for watching. I made a video that gives the measurements for the pattern that I made for this. I'll put a link here >> ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uD_7mO641Is.html
Hey. I love the size of your scrunchies & thank you so much for sharing the way u make your labels. Can you please tell me, what is the size of your scrunchies & what size is your elastic band? I'm thinking about making some for myself & maybe start my own scrunchies business.
Hi there, thank you for watching and I'm glad you enjoyed it. The extra large scrunchies I made the pattern 20cm wide and with the satin fabric I made the length the whole width of the fabric. If your fabric is really thick and chunky I wouldn't make the length this long because it would be too bulky. I just use the 6mm elastic and then cut the elastic at 22cms. I tie my elastic and pull really tightly to make sure it won't come apart. Smaller satin scrunchies that have extra scrunch I make 10cm wide and the whole width of the fabric also. I like my scrunchies extra scrunchie! So the length of the fabric will vary depending on how thick it is so you might just have to play around with that for different materials😃
