16 facets in girdle, 8 facets first step 35° and second step is about 20° . but use the angle that suits your stone, it doesn't matter much.👍

A simple two-step emerald cut design. Choose the angles that suit you according to the material. Rose cut has no pavilion and no table, and it can have three facets and more as you like in all kinds of designs.👍

right, just a cheap simple experiment

Nothing is missing, better watch the video, experiment only with plates

In my other video there are a lot of dopstick 8mm brass . I use a brass dopstick and red wax to secure the stone for the pavilion and crown and girdle . I use a transfer jig, I have several of them, but I mostly transfer by eye. Thanks for following my channel and leaving a comment. Best regards

@@Liburni Thank you for your answer.I'm asking about the dop mounted on tang not about dopstick and how you cut the girdle and table.

@@valentinstan5359 I use dopstick and red wax to cut the colored stone. The base on which I place the diamond tang can be adjusted on several levels, so I can work with the same handpiece as a girdle and a table.

Thanks .

I made the table freehand. With a little practice, a very good result can be achieved. But sometimes I also used a 45° adapter...

NFS Not For Sale

👍👍👍💎💎💎

Sir, I want to buy this Tool. What is the price of this? And can you teach me to make this Tool?

@@mohsinali1269 This is not for sale, it is experimental

It has a little rust on it, when I clean it I hope for a better measurement. Chuck is standard for Chinese quality. There's a lot of work to be done there before it starts working.

I was thinking of making a video, unfortunately it's quite difficult for me with my mobile phone, but I probably will one day.Thank you very much for following my work. All the best and Happy New Year.

Try it, it's good material, good luck.

Neighbor, thanks for watching my channel. I don't have a plan for a complete machine because I built it from leftover materials in the workshop. There are 4 videos on building a faceting base. I can only say the basic information; the motor is 370W 1450RPM, the disc is 6 inches and rotates at approx. 550 RPM. On the iron structure that I welded, I added a 13mm thick aluminum plate. The hub with ball bearings was modified from a motorcycle....

Thanks for the comment and following my channel.

I have to cut the sea glass again , thanks thanks 😍

Thanks for following my channel. I made several experimental models and they helped me a lot in learning how to facet a stone. Now I'm working with a diamond tang handpiece, but for the next project I'm collecting material for a simple handpiece...

Thanks for watching and nice comment. The easiest entry into the world of gemstones

thanks

Nope, emerald 😬😜

@@Sodabowski exactly. But Daniel knows for sure because he cuts gems himself. The material is corundum, a type of ruby. Emerald cut , diagram for higher RI , based on the book by Justin K Prim😁❤💎🖖

Definitely has nothing to do with virgins. DJEVA is shortened from the DJEVAHIRDJIAN , company in Switzerland...Thanks for following my channel.

I use red wax. It is a wax that is also used for sealing doors or boxes. It is hard, brittle and has a higher temperature than other waxes. You can find it on ebay to buy under the name "dop wax". It comes in different colors that indicate the melting temperature, and they are all based on shellac. Thank you very much for following my channel. Best regards Predrag

@@Liburni thank u very much idol..

@@sarisaringkalikottv9516 Thank you for the kind words.

Hello friends. I myself, also a disabled person, use crutches and for longer distances over 100m I use a wheelchair , also survived malignant cancer and two heart attacks .... Faceting machines are quite expensive, so I made my own base and experimented with beginner handpieces, which actually turned out to be great for working with simpler designs. My basic idea was to enter the faceting world cheaply. There are many more YT channels where you can learn how to polish a cabochon or faceting. A fantastic hobby for someone who is well served by eyesight and hands and age or other disabilities are not a limitation. For me, this hobby is the best medicine and entertainment. I would like to record better videos, but for now with a mobile phone, that's all. Thanks Best Regards .

thanks

Unfortunately, this is a wonderful hobby, but the equipment is too expensive for amateurs. That's why many started the path of self-building machines. If I have helped anyone with my work, I am very happy. Thank you for your kind words.

yess😍😁

I published 4 videos until the end of the construction. Now I'm slowly coming up with another construction and starting to collect material.

@@Liburni great letme know if you found the solution to add a cheater to the hand piece , my imahashi hand pieces are type c with no cheater but i found a solution and you can cheat doing a different approach

@@showmewhatyoucanmakenotwha8427 now I mainly use "Rico tools" diamond tang and they have several different settings of the cheater which is continuous and goes 360°. On my experimental handpieces, I used cardboard padding under the cheating leg and thus got the position for the facet....

@@Liburni this is what i did you can do it too . i added a goniometer stage between the raising plate and the shaft . the goniometer will be the same as a cheater but on the plate not on the hand piece . if you have whatsapp i can send you picts of the goniometer stage . it by adding a goniometer it will letyou tilt a couple of degrees to the right and a cuople to the left with precition and go back to same positio , you can google ehat a. optical goniometer stage is .

Yes, the return is excellent, I lost very little material in cutting.Thanks for watching.

I glued the leather to the wood . Thanks for watching .

thanks

For a beginner amateur, it is very expensive, it requires a lot of investment. For those who work professionally, it is a money-making machine.

I think you can see how does it look like , and It says in the comment;"Restored old electric motor ElektroKovina 220V 0.37kW 1330 RPM" , of course AC motors (alternating current) ...But you can put it as you wish or whatever you already have in the workshop. In terms of power, 250W to 750W is all good. RPM is 1350 to 1500 quite enough, and you reduce the number of revolutions of the disc with the pulley. If you also add electronic speed adjustment, it will be fantastic. The most important thing is to find a motor without vibrations. Thanks for following my work and comment. Best regards .

I did not understand your question, please clarify. All materials for construction can be seen in the video, aluminum tube, outer profile 10mm, inner 6mm, dopstick 6mm, aluminum piece 14mm thick. The plate sheet is aluminum 3mm thick, it can also be plywood...Of course, everyone can use their material of different dimensions and still achieve the same effect. I had this material left over in the workshop and I used it for an experiment...Thanks for following my work

print it out on A4 paper, these are the panel measurements and the outline and index facebook.com/liburnidesign/photos/p.1657604911111194/1657604911111194/?type=3&av=542469695958060&eav=AfYE8_enjDOUQEFL4vievrTBgKn12Vkzo-vCtrb4TFSSterH1wmf-8ytpEBukokAFwY