Welcome to the official RU-vid channel of Makita Eastern Europe, a distribution center for Makita professional hand tools and accessories for the countries of Eastern Europe.
Now, this video shows the problem but not the solution: The grease cartridge does no go fully down the tube because the plunger is too large for the cartridge diameter. The cartridge must be forced onto the plunger. The manual says to just push on the tube when screwing it into the gun. This is not easy since the gun must be braced while pushing and turning the tube to get threads started all while being careful not to have the pull rod disengage causing a mess!
Cooling capacity of CW003G is -18 to 10°C, with 7 inside temperature settings (-18 / -15 / -10 / -5 / 0 / 5 / 10°C). Work amount on full battery charge (BL4040) is approximately 5,5h.
The tool itself is the same, difference is in equipment supplied with the tool. Please check your local Makita website for more information on what is supplied with model RT0702CX3J.
RT0702C has anti-restart function, whereas RT0700C does not. Difference is also in no load speed - RT0702C: 10.000 - 34.000 min-1 / RT0700C: 10.000 - 30.000 min-1, and a small difference in dimensions and weight.
@@MakitaEasternEurope thanks for the information! I am tempted to buy this to add to my makita collection but I can't help but wonder whether a newer version of the DRT50 is due to be released like the other one
HR007G is stronger and a bit heavier, that is why it is more suitable for drilling into the ground. HR003G does not have Active Feedback sensing Technology function to minimize the effect of kick-back and AWS system that connects to compatible vacuum cleaner with Bluetooth. HR003G has variable speed trigger for speed adjustment based on materials or application.
DDF486 is driver drill and DHP486 is hammer driver drill - this one has hammer drilling mode (rotation with hammering). The time to engage the hammer mechanism is when you’re drilling a hole in concrete or masonry.
