Menno, m’n complimenten hoe je Hdashboards en Homey tegelijkertijd behandeld 👍. Ik heb een tijd geleden besloten HD te nemen, maar tot op heden niets mee gedaan, voor mij teveel leeswerk 😉. Deze video’s motiveren me om er weer mee aan de slag te gaan. Ook even compliment voor Glenn! Heel langzaam begint het net zo mooi te worden als HA, iets dat voor mij veel te moeilijk is 😉
I have a dedicated advanced flow for sunlight, each room has this IF lumens is higher than ___ AND lights are off THEN disable _____ Lights flow, I'm not good with the system flows
Hi Menno, Is there (couldn't find it on the homey page en discord) somewhere a list of devices or device types recommended for hdashboards? I know it works on iOS, Android and web, but if you're going to use a stand alone device, are there any recommendations for e.g. iPad, Nest Hub, some cheap other tablet or do you just buy the most practical of cheap one and it'll work anyway?
Good stuff! I suppose you could also use motion sensors in neighboring rooms to determine whether you may have left the room or not? If the motion detector in the living room was the last one to trigger, it should (provided you have enough well placed motion detectors) be possible to deduce that you cannot have left the room, and it shouldn't start triggering any timeouts. If you don't live alone, you obviously can't say that triggering the motion sensor in the neighboring room means you must have left the room, but the reverse seems sound. Is this something you have experimented with?
Mooie toevoeging! Ik gebruik Hdashboards al, ben hier heel blij mee. Ik zie dat de tekst binnenin de gauge niet schaalt met de grootte van de gauge. Zou het mogelijk zijn om de tekst automatisch vullend te laten zijn binnen de kromming van de gauge?
Ziet er super uit, respect voor al je werk! Als ik je voorbeeld zie lijkt het mij lastig om van een afstandje te zien in welke kleur de meter staat. Zou een naaldje zoals een snelheidsmeter niet handig zijn, al is het een optie?
Hey! It is, it's still being updated 1 - 4 times a month. I'm just a terrible RU-vidr! it takes me a lot of effort to make these videos. Time I rather spent on making updates usually.
Hey Menno, Is er naast de video ook een handleiding voor andere zaken? Ik zie op de site bvb mooie graphics om muziek te bedienen, af te spelen op sonos?
Thanks for the video. I would like to use the HDashboards with my Homey. But I would like to know will the google nest cameras will stream on the dashboard?
Partly i wanted to share the concept no matter if you use homey or home assistant. Also this concept is pretty easy to translate to zones. I still want to make a whole video about zones.
Great to see these types of videos on Homey!! I'm experimenting with mmWave motion sensors myself. Next item on my list to buy is the Sonoff mmWave motion sensor :):)
Hi Menno, nice video mate! a comment and a question. Why pause the timer and not stop them? and could you expand this flow with a physical button override? My kids sometimes want to leave the light on in the "overpass ;)" for an hour or so when going to sleep.
Stopping or pausing results in similar behavior both are fine indeed :). I was about to make another video on how to turn on/off automations. The easiest way is by using a book variable. That you can create on the top. Use an extra card to check that bool. But maybe it's better to make a video about it.
Nice video Menno! I did learn something new. But I expected you to demonstrate the use of Zones (active and inactive) instead of motion sensors. I have learned some time ago it's better to use zones for this. This way when changing motion sensors you don't have to repair the flows. Another thing you didn't mention is that most motion sensors themselves already have a build in time-out. For example Aqara motion sensors (and I believe also the Philips ones) have a minimal detection time of 60 seconds. Meaning only after 60 seconds the motion sensor signals there is no motion anymore.
Gonna make a separate video about zones. The issue with motion sensors might be that i have connected mine without a bridge and don't have a hue app to configure them. Thanks great input!
I stopped using zones since i found out that sometimes they were not correctly updated by Homey. So I stopped trusting them.@@HDashboards This method I control at least the flow.
Great stuff, Menno. Not dashboard related, but I love seeing how you solved some of the common problems when using motion sensors. I am not controlling lights with a motion sensor because of these issues. But I am going to give it a try based on your flow. Thank you. Keep up the good work.
Very nice. I'm now using SharpTools for Homey and works wel but has some issues with the accurate of values from temperature and humidity sensors that's what I experienced . Is HDashboard more more accurate more accurate with indicated values than SharpTools?
Hey there, yes SharpTools works with a homey app and gathers data from there. HDashboards really connects to your homey server and listens to homey events. This will result in realtime changed with zero delay. As soon as homey knows it, hdashboards will to do immediately