It worked I got back in my appartment after I left the keys in going to get some snacks cause I was high, 10/10 had to rotate my card long ways to get it in the angle easier
thanks , great review . I just picked up one a relative bought used , and had help loading it , so i had to check how to unfold , i had trouble becuase i didn;t know to loosen the knob bolt on the side and then pull loose the pull pin i guess ... I'll show the owner this vid for her reference , i might try this thing out once in a while , get the endorphins going while indoors maybe watching vids like now ...I was surprised how handy it fit in the vehicle and I'm familiar with mechanics, machining , metallurgy , manufacture and imo it's well built, sturdy and compact. , I got some info from the vid i might have never noticed , I'm saying looking it over and the low price used but i don't see any wear, no rips on foam , no scratches anyplace ...to explain i scrap metal appliances and items , sometimes tinker or engineer new items and for me doing that as a passtime, the entire thing is interesting even if she tossed it , but i think it'll stay in good working order a long time .... EDIT: srry reply so long , I'm happy i found your vid in under a minute and the cool deal on it , the only thing i tried it out just now , and my only only criticism is the pedal length and it has a "7" on it but there's plastic caps to access the pedal crank , i think i can use the old style ten speed cranks with the tightener bolts on them , i think it should clear in most positions with the "upgrade" EDIT2 : i think IF , longer cranks won't clear in some desired position i could add spacers on the feet (taller) but it's probably ok as is i can make it work though IF...
So I’m just having a problem all my windows go up except the one in the back of the passenger side. It makes no noise to go up or down and I tried the button from that same window and will not go up . Now I have a window down while the others work. What can I do ?
@tiffanyrodriguez3123 Hey I was in the middle of ocean- just got back. Hope you were able to figure this out or at least find someone to help you figure it out!
Hey ! I order the part with the link u gave and they sent me a cheap replacement maybe from china it didn't work. Do u know where I can get the original part and headlight covers please ?
I just checked the link and it specifically says it's an OEM part. If they didn't you OEM, return it, but it doesn't make sense. As for headlight covers, I have never changed those. I search for everything on Amazon.
Also, try this possible solution from another viewer from two years ago: "I had the exact same front passenger window problem on my 2015 Honda Accord. Solution, turn on ignition, roll down passenger window using passenger control, roll up and hold up for 12 seconds. It is reset and drivers control worked again without replacing anything."
@@SuperSimpleFixes The control button for right side is broken it needs to be replaced. I will check that link again maybe it was out of stock at that time.
Most likely. If you tested each window at each controller and they all work, and the front windows do not work only when you use the master switch, it is most likely the master switch. There might be other issues we can't pinpoint though. Keep the receipt if you order a master switch just in case. I wouldn't lock everything in until you know it all works.
Hello Dear, I have analyzed your RU-vid channel and found some issues for which properly view and subscriber are not growing Your channel is not customized.If you solve these problems, you will get views, subscribe and grow the channel If you are free, we can discuss this problem?
The button that controls my driver-side window has gotten really loose and flimsy as if it's about to break off. It still works though. Do I need to change the entire controller (like in your video above), or can I just order one button and somehow replace the defective button?
It's been several years since I did that project, but I remember being able to open the module itself to see the buttons. I'm not 100% sure, but I am guessing it is possible to change just the button itself. I would get into the window controller console to see if you can access the individual buttons before ordering anything though...
@@MuffyOne I did a little more digging and didn't find any individual buttons either. I found one for the other passenger windows, but that's not going to work...
How do we know when the thermostat is not working? The coils on my GE refrigerator are frozen. It’s a double door, and my fridge is not cooling. I set the temperature at 34 for the fridge and for the freezer at 1 and the temperature is not setting. Any suggestions?
I am not a refrigeration expert, but according to this link, it sounds like your thermostat is bad... www.justfridge.co.za/5-signs-that-your-fridge-thermostat-is-malfunctioning/
Thank you very much! I read the instructions with the drawings but they were so tiny i didn't feel confident that I'd really seen how to do this. Your video clarified it all (including that clear plastic bit that isn't mentioned in the instructions) so.. again, thank you so much 😊
May i suggest covering the drain hole while unscrewing/screwing the the left screw for the defrost heater. I just covered it with the bubble wrap that came with replacement heater. Just remember to remove it afterwards as well. If you're not prone to dropping screws at the most inopportune times and locations. Don't worry about it 🙂 thanks! Good video!
When in the recumbent position the seat looks like it tilts back at a shear angle. Does the seat tilt independently or does it feel unbalanced sitting on it at this angle?
Yeah, I realize that. Hard angle to get on my own. Basically, I was pulling the "key" paperclip forward and backwards while maintaining slight tension with the other one.