Unfortunately, this did not fix the problem🤔. What other options are there that the water does not flow? Maybe the problem is inside? Waiting for reply. 😇
hi! the little black rubber thing around the injector's hole came off. i must have scrubbed too hard or something (it had A LOT of limescale). is there anything i can do? or is the coffee maker a lost cause? would a drop of superglue totally ruin the thing?
I am on vacation in the EU, the AirBNB’s coffee maker stopped working like this, now I feel like a genius for fixing it thanks to this video. ;) Perhaps they’ll give me a discount as a handyman????
Hi there,l have a question, When you put a cup under,is it supposed to just keep flowing or does it stop after a certain amount is filled .mine seems to just flow and flow and l can not remember if this is normal ??
Hi Kevin On this model, you have to stop the flow yourself. I know some of the other “cheaper” looking ones have automatic stop at the proper level. I have overflowed at some occasions.. 😣
@@jhotyborge ok, thanks. I used to have the first gen ,little penguin looking one, thought that one stopped automatically, but can not really remember. Now have the 2nd gen donut shape in red. Have not used it for 2 years, because of leak and blockage. All fixed and working now,just noticed it does not stop pouring. Must be like that,l guess. Just could not remember how it was 2 years ago. Thanks anyway.
Thank you, you saved my coffee machine. Nontheless, the cleaning of the little pin and the white water inlet were not enough for it to work again. I had to clean/descale the machine side of the removed block with the same pin provided at the back of the coffee machine. I removed limestone blocks and the water started flowing again. Thank you for your very helpful video.
Apparently I'm having the same problem. Water is still blocked somewhere after I cleaned the nozzle shown in the video. The pump is working and also I feel the heater on the right side warming up the water. Could you be more specific on what/where was the 2nd part you cleaned? Maybe some photos if possible. Thanks.
I think my filter just gets stuck again as soon as I put the tank in place. Or is it supposed to fix in place (as in not turning) when you push it back down? It does turn freely when you lift it up, as shown in the video.
Same question here. The pump is making uneaven sounds and the water pressure is not stable, making coffee extraction longer than it should (41+ seconds compared to 26 as compared with the same model without the problem).
