i have a “comfee “ unit. is there a trick to getting the drain pan clipped back in place? i’m not sure if i broke it when i wiggled it out

👌

Do you take steroids?

Crazy this came up right after my Sony 4k TV did the same. I ended up leaving it off and ubplugged for a week or so and it turned back on again.

Thank you! I fixed my S6 roborock just by diaassembling the motor and sensor and turning it with 9V battere. Put it back and it works.

Is it BLUE STAR AC?

Hi i have the same model 1997 toyota forklift 42 -6fgcu15 62381 you replaced the head on my question after i replace my cyl head i need to adjust the carburetor on the fuel mixture by the battery there has no place to use a screw driver to adjust my fuel mixture i must have a early or late fuel mixture just can't find any adjustments Thank you

That's the problem dig it yourself and save 25

Legend! Finally someone who doesnt pad out their videos with crap.

Thank you! I changed the piecr ans following your tutorial I fixed it!

I use a wet / dry shop vac to suck out the build up of water and soil.

Thanks! In our case all it took was to gently rotate the LiDAR tower!

Thank you great idea worked wonderful

I agree . But too messy. Thanks for the video

Toyota 1, skippy 0

In india i have this for sale .. anyone frm india in pune or bombay do contact me if needed… awesume condition i have

I've been looking for a replacement. Can anyone tell me what kind of cell this is?

Sorry, brother man, you didn't fix the AC you fixed the cabin fan. The HVAC fan. The blower motor. It's only just three and some odd minutes but I can't get that time back.

That’s fucking horrendous

How much % hydrogen peroxide to be used 3%,6% or higher

What size piston back in it since it howned clean up

Is that bike slow it a70mm bore I believe

Thank you so much!!! I bought one secondhand off marketplace and was so sad that the stream was really inconsistent and it took about 3-4 compressions to get any kind of fizz. Had a look at my cylinder seal was sooo grubby!!! A quick wipe and it was working good as new!! Thank you thank you thank you!!!!

With no dirt dug out, what do you have to fill the ditch back?

Can't find linc

Impeccable, un tres grand MERCI!!!!!👍

Straight to the point , simply to follow instructions, excellent

Thank you for this one, managed to fix my Sodastream Source with this teardown video! Had the broken nut, got one printed for me with a 3d-printer and used this to open and then assemble mine.

man i was sure its about to fall apart thank you !

Thanks, very helpful 🌞👌🩷

Found a small rock that somehow was stuck under the lidar. Thanks!!!

shovel because you can hide body with the dirt

Yasoo Nick! I tried to turn the spring with my screw driver, but it would not turn. It seems it may have seized. I've tried WD40. It hasn't been touched for about 15 years. Any suggestions? 🇬🇷🇬🇷🇬🇷

I still dont get gow he did this, wish he wkuld have shown that on the video

Thank you so much for this video ❤️!!!!It saved me money and hassle to look for a new vacuum . I was about to give up and through to garbage my roborock vacuum .I thought I did everything since I changed all filters and dusted off, except that small part where motor is there have been nit cleaned . Now is working like new ☺️

Why are those deer’s jumping?

Rent a trencher from Home Depot and be done in about 15 minutes with less mess.

Thank you so much for this take apart tutorial. I had a single grain of rice stuck in the spinning laser contraption and it took down the whole system. Took it apart and fixed the whole unit.

Efkalisto!

bassically carmageddon irl

How much water did you use?

How to fix a robotic vacuum cleaner Roborok 5 - which stops working after a few minutes.

You fucking legend!!!

This is not a DIY job. This type of work is a trade. Don’t be cheap when it comes to protecting your biggest asset. BTW I’m not a tradie.

Sides and tops need to be done at same time so they tie in.

Drive slowly and watch out darling

Great video! Many thanks!

Thank you🙏🏻

super helpful , easy to understand, and straight to the point ! thank you so much ! no way i could have figured it out without this video !

Note that the removing white cover on top of lds screws voids the warrenty. In my country roborock has 1 year warrenty but lds has 2 years so check before you void your warrenty. You may be able to get full lds replacement for free.