Hello ! I'm Stephen. Welcome to AutoGleam Truths. The Channel takes on Honest Auto Reviews, Detailing Products, & Reviewing memorabilla from years gone by, I am a old school Petrol Head Baker so I show you behind the scenes of Crap I buy and test out some good and some bad., I hopefully have a weekly Video, sometimes I load up 2 aweek if I have the time, Please subscribe to Laters Steve
Yes. I got the K5 with TRacer. My goodness I broke myself and got through 2 of those stone cleaning solutions. Rubbish!! Never again. Maybe OK on porcelain but I live on a main road. Took me a whole day just to do the drive 😭
@kadgek I was using that product not so long ago, and I was thinking the same as you, I found some of the old school stuff that works better than the Karcher cleaner, I did see some of the other stuff they sell and I was wondering if it would be the same thing on cars, I may get some next year if I have the time to test out 😀 laters Steve
@sendikarim195 if you are using the Worx foamcannon, yes, but remember that the foamcannon will not be available for other purposes after the pesticides have been used 😉
@@DriveWithAndy Water Broom for Pressure Washer, Dual-Function Undercarriage Cleaner 16 Inch Underbody Car Wash Water Broom 4 Nozzles with 3 Pieces Extension Wand 4000 PSI (Silver) amzn.eu/d/askXKLz
@@DriveWithAndy sorry about that 👍 what you need is this product it fits into your Karcher as normal then into that goes the water broom, this option opens up your door to do things that other models can do by using foamcannon as well laters Steve 🙂 link: MINGLE Pressure Washer Gun Adapter, to 1/4'' Quick Connect Fitting, Compatible with Karcher K Series, K2, K3, K4, K5, K6, K7 amzn.eu/d/fsAqZkD
Don't start on low grass or the smart part doesn't work, it's doesn't no when to cut low or hi grass 😮 I only use 2 times, and I had it, now it's gone back 😢
The problem with the foam cannon is a lack of water flow rate not so much the pressure. You need about 5 litres per minute to start getting good foam, the Worx can only manage 3.7. I have the same problem with my Ryobi EZ Clean, TBH the Worx foam cannon works way better than my Ryobi either with the Ryobi cannon or a MJJC one.
Hi mate it's deffo correct if you look under each side there's a little pad that needs to be pushed down so each side has to touch closed to register the click... its genuinely not motion sensors and cannot read your finger its called a soft click
@KevinLee-vh8gm I know what you mean. My new one has been fitted, but knowing what you mean, with the new mini remote protection cover, you have to press harder. Currently, I am testing out the cover for a video. I'm not really sure how long both will last 😅
@mitza6162 I believe there are 2 different ones. As I found on the website, my bike shop has replaced it, and everything is fine today 🙂 so all I need to do is return to riding 👌 I think I have been on the bike for a 8 weeks now and lost 1 stone in weight, and my fitness is up aswell, until I go back to the motor less bike 🙂 laters Steve
If the batteries are kept out in a cold garage or shed they can have a really hard time delivering power. Kind of like how cars also hate starting in the cold too.
@mac-vl4ib don't use hot water, warm water is ok, to be honest, temperature is very important, I use hot tap water mixed with hot, works bang on 😀 you don't want to over heat the unit 😜
I highly suggest at full length moving the detachable handle farther out to hold the unit better for stability otherwise it will feel unevenly weighted.
@doubleleterlady personally, I would take no notice of that. It's a real pain in the app to take it apart 😪 no quick fix here. The only time to take it apart is if it's broken 💔 laters Steve 😀
@morgan8937 I have not seen it, unless something in the comment youtube didn't like and removed, youtube is updating everything, I am not allowed to put links into shorts and a number of other things, the list goes on, by the way you are not the first one to get comments removed 😉
@AutoGleamTruths ty, yeah YT has been acting messed up for me with not being able to see replies on comments, and my comments not appearing. Until very recently. Seems fixed now though. Anyway, briefly, my comment was about how I haven't been able to register products at all on Worx. Whilst signed into the UK site, part of the registration process passes you off to the US website-and the US website doesn't recognise UK worx accounts. I was told that that the US guy in the USA that the UK team reaches out to with web process issues left the company. And the UK have no authorisation to the back end of the system. Hopefully they have got on top of the situation as they assured me they would. Maybe it makes no difference as I'm sure Worx will work with peoples receipt of purchase. But just be aware that there either was, or still is a situation in the UK where you can't officially register your Worx products for warranty either online through their UK website, or via a support/ service rep. If you need something replaced that you believe would fall under warranty terms and conditions, you have to reach out to them and often await a lengthy turnaround on a first response.
@morgan8937 funny you said that, I tried registering my mower and can't believe it stopped working, so I have a 2nd new WG761E Lawnmower, which I will test registering shortly, originally I did other products by mobile phone, but this time I will use the Worx website on laptop, I will will let you know what happens 😀 hopefully it registers OK, but knowing some things about warranty, we don't need to register for warranty in the UK, but I still do it 😀 with all products, Which said not necessarily as warranty is nothing to do with registering a product 😀 laters Steve
@morgan8937 yes I have been having problems with registering again, so I have written to Worx just now this is what I put: Hi Emma I have tried to register my mower at Worx but it's not working, it's required numbers for everything, I put in numbers as requested, but it's not working 😢 so basely I am guessing this is a problem that a number of different people said to me regarding this, as I pointed out to them we have a invoice etc and the warranty is covered by Worx, hopefully you know of the problem and will sort out over the next few weeks or so 😀 laters Steve So hopefully I should have a reply sometime 😂🤣😅 I am thinking about doing a video on this 🤔 I will feedback on the reply laters Steve
@StefanKrstic2 Thanks, mate 👍 I will be replacing them, I think I remember correctly fitting them 10 years ago or more, but they have got to go shortly after my brakes have been sorted 😀
@caterhamsuperlightr81 I got it in 1984. At the time, I didn't know that this was 1 of 1, so I decide to keep it very much original as possible, even in the early 80's I didn't think the paintwork was the best, so we had to do it ourselves to get the original Ford orange peel 🤣 hopefully I can sort out the brakes soon, running great but don't stop well 😀 laters Steve
@GJX-xy7dm Connecting a hose from a tap to a Worx Nitro Hydroshot pressure washer requires a few simple steps and some basic equipment. I'll guide you through the process of setting up your Worx Nitro to ensure you have the right connections and hose. ### Tools and Materials You Need 1. **Garden Hose**: Standard garden hoses are usually 1/2 inch or 3/4 inch in diameter. Choose the right length based on the distance between your tap and where you plan to use the Worx Nitro. 2. **Tap Adapter**: Ensure your tap has the correct adapter to fit a garden hose. Most outdoor taps are threaded for standard hose fittings, but if yours is different, you may need an adapter. 3. **Worx Nitro Hydroshot Adapter**: - **Quick-Connect Adapter**: Worx often provides a quick-connect adapter with their products. This will allow you to easily connect and disconnect the hose from the device. - **Suction Hose Adapter** (if not using a garden hose directly): Some models come with a suction hose adapter for drawing water from a bucket or other sources, but for tap connections, the quick-connect is more commonly used. 4. **Hose Washer**: These are rubber or silicone washers that fit inside the hose connectors to prevent leaks. 5. **Clamps (Optional)**: Hose clamps can be used for a more secure connection, especially if you are adapting the hose for different-sized fittings. ### Steps to Connect Your Hose 1. **Select the Right Hose**: - Measure the distance between the water source (tap) and the area you want to clean to ensure you have an adequately long hose. - A standard garden hose of 1/2 inch or 3/4 inch in diameter is suitable for most setups. 2. **Install the Tap Adapter**: - If your tap doesn’t have a standard garden hose thread, install a tap adapter. - Screw the adapter onto the tap, ensuring a snug fit. Use plumber's tape if necessary to prevent leaks. 3. **Connect the Hose to the Tap**: - Attach one end of the garden hose to the tap, ensuring there is a hose washer inside the connection to prevent leaks. - Tighten the connection by hand; do not over-tighten as this can damage the washer. 4. **Connect the Hose to the Worx Nitro Hydroshot**: - **Using the Quick-Connect Adapter**: - If your Worx Nitro comes with a quick-connect adapter, attach it to the input on the Hydroshot. - Connect the other end of the hose to this adapter. - Ensure the connection is secure, and the washer is in place to prevent leaks. 5. **Turn On the Tap**: - Slowly turn on the tap and check for any leaks at both the tap and Hydroshot connections. - Tighten connections as necessary to stop any drips. 6. **Power On the Worx Nitro**: - Ensure that the Worx Nitro is properly assembled and powered. - Turn on the device and test the water flow and pressure to make sure everything is working correctly. ### Additional Tips - **Check Compatibility**: Double-check that all components, like the hose and adapters, are compatible with your specific Worx Nitro model. - **Using a Suction Hose**: If you plan to draw water from a bucket instead, attach the suction hose to the Worx Nitro and place the other end in a water source. - **Filter Installation**: Consider installing a water filter between the hose and Worx Nitro to prevent debris from clogging the system. - **Pressure Settings**: Adjust the pressure settings on the Hydroshot as needed for different cleaning tasks. ### Troubleshooting - **Leaks**: If there are leaks at any connection, check the washers and ensure that everything is tightly connected. - **Low Pressure**: Ensure there are no kinks in the hose and that the tap is fully turned on. - **Adapter Issues**: If the adapters are not fitting correctly, you may need to purchase specific adapters for non-standard fittings. By following these steps, you should be able to connect your Worx Nitro Hydroshot pressure washer to a water source successfully. If you encounter any specific issues or need further assistance with particular models, consulting the Worx user manual or customer service can also be helpful.
I've just bought the jet hawk for showering at the back of the campervan and it only cost £60 but I think the hose that came with your one is much better quality so I need to upgrade the hose
@patrickpirelli7897 The best one is Karcher pipe, better quality, and is a bit longer than Worx, Kärcher 26431000 5 m Suction Hose and Filter for Pressure Washer Accessory, White, Yellow amzn.eu/d/06fTSrw1
That's why I wear steel cap boots instead of sneakers also who the hell is going to shove their foot under a running lawn mower you'd have to be a complete idiot to do that
@waleedghanem3536 Out of 10 different foamcannon, I have only 2 works well, 1st Worx foamcannon down side no adjustment and then you have to use alot of foam shampoo, Best one for me is the Autobrite foamcannon works great with full adjustment and less shampoo needed, also very important is the 1*foam maker and 1* fine needle; now in the one you have you can change the fine needle to different size, in turn better foam, this is different on some foamcannons which stop you from removing excess, hopefully this will help you 😀 laters Steve
@@AutoGleamTruths I'll give it a shot when the need arises. Thank you. I won't buy filters from Shark, overcharge. I bought from a seller on ebay. It is good to have extra filters while the others are drying.
